Effect of Leading and Trailing Spark Plugs on Combustion, Fuel Consumption and Exhaust Emission in a Wankel Engine

2021 ◽  
Author(s):  
Ömer Cihan ◽  
Osman Akın Kutlar
Keyword(s):  
Fuel Consumption ◽  
Exhaust Emission ◽  
Wankel Engine

scholarly journals Kaji Eksperimental Rasio Metanol-Bensin Terhadap Konsumsi Bahan Bakar, Emisi Gas Buang, Torsi Dan Daya

2018 ◽  
Vol 1 (1) ◽  
pp. 47
Author(s):  
Mohamad Rifal ◽  
Nazarudin Sinaga
Keyword(s):  
Fuel Consumption ◽  
Alternative Fuel ◽  
Experimental Result ◽  
Injection System ◽  
Exhaust Emission ◽  
Emission Power ◽  
Si Engine ◽  
Fuel Blend ◽  
The One

Methanol (CH3OH) is the one of an alternative fuel for SI engine. Methanol has a similiar charakteristic and fisik properties to gasoline. This study using methanol-gasoline fuel blend (M10, M20 and M40). The aim of this study was to determine the effect of using methanol-gasoline fuel blend of  fuel consumption, exhaust emission, power and torque. In the experiment,  an engine three-cylidre 12 valve with tecnology DOHC Mivec and ECI MPI injection System 1193 cc was used. With a little modification that is using methanol controler to maximize the result of research. The experimental result showed that the fuel consumption decrease with the use of methanol-gasoline ful blend. Each of these reductions in fuel consumption for the M10, M20 and M40 are 1 %, 3% dan 3%. The Power and Torque is increas while using fuel blend than gasoline and it also decrease exhaust emission

scholarly journals Analysis of exhaust emission measurements in rural conditions from heavy-duty vehicle

2020 ◽  
Vol 182 (3) ◽  
pp. 54-58
Author(s):  
Andrzej Ziółkowski ◽  
Paweł Fuć ◽  
Piotr Lijewski ◽  
Łukasz Rymaniak ◽  
Paweł Daszkiewicz ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Road Transport ◽  
Exhaust Emissions ◽  
Operating Conditions ◽  
Transport Sector ◽  
Exhaust Emission ◽  
Heavy Vehicles ◽  
Heavy Duty Vehicle ◽  
Emission Norm ◽  
Test Route

Road transport holds for the largest share in the freight transport sector in Europe. This work is carried out by heavy vehicles of various types. It is assumed that, in principle, transport should take place on the main road connections, such as motorways or national roads. Their share in the polish road infrastructure is not dominant. Rural and communal roads roads are the most prevalent. This fact formed the basis of the exhaust emissions and fuel consumption tests of heavy vehicles in real operating conditions. A set of vehicles (truck tractor with a semi-trailer) meeting the Euro V emission norm, transporting a load of 24,800 kg, was selected for the tests. The research was carried out on an non-urban route, the test route length was 22 km. A mobile Semtech DS instrument was used, which was used to measure the exhaust emissions. Based on the obtained results, the emission characteristics were determined in relation to the operating parameters of the vehicles drive system. Road emission, specific emission and fuel consumption values were also calculated.

scholarly journals A Study on Characteristic Emission Factors of Exhaust Gas from Diesel Locomotives

2020 ◽  
Vol 17 (11) ◽  
pp. 3788 ◽  
Author(s):  
Min-Kyeong Kim ◽  
Duckshin Park ◽  
Minjeong Kim ◽  
Jaeseok Heo ◽  
Sechan Park ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Environmental Protection Agency ◽  
High Speed ◽  
Emission Factors ◽  
Exhaust Emission ◽  
Emission Measurement ◽  
Exhaust Gas ◽  
Diesel Locomotive ◽  
Diesel Vehicles ◽  
Engine Power

Use of diesel locomotives in transport is gradually decreasing due to electrification and the introduction of high-speed electric rail. However, in Korea, up to 30% of the transportation of passengers and cargo still uses diesel locomotives and diesel vehicles. Many studies have shown that exhaust gas from diesel locomotives poses a threat to human health. This study examined the characteristics of particulate matter (PM), nitrogen oxides (NOx), carbon monoxide (CO), and hydrocarbons in diesel locomotive engine exhaust. Emission concentrations were evaluated and compared with the existing regulations. In the case of PM and NOx, emission concentrations increased as engine output increased. High concentrations of CO were detected at engine start and acceleration, while hydrocarbons showed weakly increased concentrations regardless of engine power. Based on fuel consumption and engine power, the emission patterns of PM and gaseous substances observed in this study were slightly higher than the U.S. Environmental Protection Agency Tier standard and the Korean emission standard. Continuous monitoring and management of emissions from diesel locomotives are required to comply with emission standards. The findings of this study revealed that emission factors varied based on fuel consumption, engine power, and actual driving patterns. For the first time, a portable emission measurement system (PEMS), normally used to measure exhaust gas from diesel vehicles, was used to measure exhaust gas from diesel locomotives, and the data acquired were compared with previous results. This study is meaningful as the first example of measuring the exhaust gas concentration by connecting a PEMS to a diesel locomotive, and in the future, a study to measure driving characteristics and exhaust gas using a PEMS should be conducted.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

A review on retrofit fuel injection technology for small carburetted motorcycle engines towards lower fuel consumption and cleaner exhaust emission

2014 ◽  
Vol 35 ◽  
pp. 279-284 ◽  
Author(s):  
Mohd Taufiq Muslim ◽  
Hazlina Selamat ◽  
Ahmad Jais Alimin ◽  
Noorfaizah Mohd Rohi ◽  
Mohd Faisal Hushim
Keyword(s):  
Fuel Consumption ◽  
Fuel Injection ◽  
Exhaust Emission ◽  
Lower Fuel Consumption ◽  
Injection Technology

scholarly journals Exhaust emission and fuel consumption characteristics of light duty under different driving cycles

2021 ◽  
Vol 268 ◽  
pp. 01050
Author(s):  
Peilin Geng ◽  
Le Liu ◽  
Yuwei Wang ◽  
Xionghui Zou
Keyword(s):  
Fuel Consumption ◽  
Large Displacement ◽  
Exhaust Emission ◽  
Small Displacement ◽  
Control Technology ◽  
Test Cycle ◽  
Testing Conditions ◽  
Driving Cycles ◽  
Light Duty ◽  
The Difference

This paper focuses on light duty of china 6 with the same emission control technology. three vehicles, with different engine displacements, were selected to study the emission and fuel consumption characteristics under three test cycles of NEDC, WLTC and CLTC. The results show that the emissions of CO, THC and NOx under WLTC cycle are minimum, compared with the NEDC and CLTC circulation. with the decrease of the engine displacement, the difference of CO and THC emissions increases among different cycles, which shows small displacement engine vehicles are greatly affected by driving cycles. Compared with other testing conditions, the PN emissions are relatively larger, but the difference of PN emissions is very small among the three test cycles.The fuel consumption of the WLTC test cycle is the smallest among the three cycles. As the engine displacement decreases, the fuel consumption difference decreases, indicating that the fuel consumption of large displacement engine vehicles is greatly affected by the cycle condition.

scholarly journals A Review of Comparative Study on The Effect of Hydroxyl Gas in Internal Combustion Engine (ICE) On Engine Performance and Exhaust Emission

2021 ◽  
Vol 87 (2) ◽  
pp. 1-16
Author(s):  
Amir Ridhuan ◽  
Shahrul Azmir Osman ◽  
Mas Fawzi ◽  
Ahmad Jais Alimin ◽  
Saliza Azlina Osman
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Engine Performance ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Complete Combustion ◽  
Brake Power

This introductory study comes up with an innovative idea of using Hydroxyl gas as a fuel performance enhancer to reduce the natural sources and the overuse of fossil fuel resulting in increased pollution levels. Many researchers have used HHO gas to analyze gasoline and diesel in internal combustion engines. The main challenges of using HHO gas in engines have been identified as system complexity, safety, cost, and electrolysis efficiency. This article focuses on different performance reports and the emission characteristics of a compression ignition engine. As opposed to general diesel, this study found that using HHO gas improved brake power and torque. In all cases, an increase in braking thermal efficiency can be observed. This was due to the presence of hydrogen in HHO gas with higher calorific value than fossil fuels. At the same time, the fuel consumption unit of the engine was reduced, and the combined impact of hydrogen and oxygen helped to achieve complete combustion and improved the combustion capacity of the fuel when HHO gas was injected. The addition of HHO gas also improved the Brake Power (BP), Brake Torque (BT), Brake Specific Fuel Consumption (BSFC), and thermal efficiency while simultaneously reducing CO and HC formation. The rise in CO2 emissions represented the completion of combustion. Therefore, the usage of HHO gas in the Compression Ignition (CI) engine improved the engine performance and exhaust emissions.

The Effects of Biodiesel Fuel Blends on Exhaust Emissions From a General Electric Tier 2 Line-Haul Locomotive

2010 ◽  
Author(s):  
Dustin Osborne ◽  
Steve Fritz ◽  
Doug Glenn
Keyword(s):  
Fuel Consumption ◽  
Duty Cycle ◽  
Exhaust Emission ◽  
Biodiesel Fuel ◽  
Tier 2 ◽  
Test Results ◽  
Fuel Blends ◽  
Measurement Variation ◽  
Duty Cycles ◽  
Biodiesel Blend

This paper documents exhaust emission test results from a Tier 2 General Electric ES44DC line-haul locomotive with 3,280 kW rated traction power, and the impact of biodiesel fuel blends on regulated exhaust emissions. Baseline exhaust emission testing was performed with a test fuel containing a sulfur concentration of approximately 400 ppm, and was followed by testing of fuel blends containing 2%, 10%, 20%, and 100% soybean derived biodiesel (B2, B10, B20, B100). Gaseous and particulate emissions were sampled per Title 40 of the United States Code of Federal Regulations, Part 92. Test results indicate particulate matter (PM) reductions occurred over the EPA Locomotive Line-Haul and Switch Duty Cycles for each biodiesel blend tested, as compared to the base fuel. The bulk of the PM reduction benefit was present with the 10% biodiesel blend, with comparatively small additional amounts of PM reductions found with increased amounts of biodiesel. PM reduction associated with biodiesel was greater over the Switch Duty Cycle than for the Line-Haul Duty Cycle. The change in cycle weighted oxides of nitrogen (NOx) for B2, B10, and B20 were not greater than the expected test measurement variation; however, B100 increased NOx by nearly 15% over the line-haul cycle. Changes in hydrocarbon (HC) emissions over the duty cycles were within normal test measurement variation except for neat biodiesel, where HC was reduced by 21% and 24% over the Line-Haul and Switch cycles. Carbon Monoxide (CO) reductions of 17% and 24% over the Line-Haul cycle were measured for B20 and B100, as compared to the base fuel. Volumetric fuel consumption increased about 1% for both B2 and B10 blends. Just over 2% increase in volumetric fuel consumption was observed at B20 and nearly 7% increase in volumetric fuel consumption at B100.

Inherent Fuel Consumption and Exhaust Emission of the CNG–Petrol Bi–Fuel Engine Based at Non–Loaded Operation

2012 ◽  
Author(s):  
Rahmat Mohsin ◽  
Zulkefli Yaacob ◽  
Zulkifli Abdul Majid ◽  
Shameed Ashraf
Keyword(s):  
Natural Gas ◽  
Fuel Consumption ◽  
Experimental Approach ◽  
Exhaust Emission ◽  
Engine Fuel ◽  
Fuel System ◽  
Compressed Natural Gas ◽  
Fuel Ratio ◽  
Carbon Dioxide Co2 ◽  
Natural Gas Vehicle

Gas asli termampat (CNG) merupakan bahan api alternatif yang paling berjaya dan digunakan dengan meluas bagi kenderaan terkini yang berada di pasaran. Kenderaan pacuan petrol bagi tujuan ini biasanya dilengkapkan dengan kit penukar gas asli bagi membolehkan operasian dwi-bahan api di antara CNG dan petrol. Pendekatan secara uji kaji ini difokuskan ke atas penggunaan bahan api, emisi ekzos dan kos bahan api di antara operasian gas asli dan petrol. Rig ujian terdiri dari sebuah sistem enjin teksi dwi-bahan api menggunakan 1500 cc dengan 12 injap sistem karburetor adalah dibina khusus. Penggunaan bahan api dan emisi ekzos yang setara diperolehi pada kelajuan putaran seminit (rpm) enjin yang berbeza ketika operasian menggunakan bahan api CNG dan petrol secara berasingan. Pengoperasian rpm enjin tanpa bebanan diubahsuai dari kedudukan pegun kepada kedudukan melebihi 5000 rpm untuk memperolehi profil penggunaan bahan api dan emisi ekzos. Kedua-dua data yang diperolehi ini kemudiannya digunakan bagi mengira kadar udara bahan api enjin. Kesemua ketiga-tiga parameter yang diperolehi digunakan untuk membuat perbandingan terhadap operasian gas asli dan petrol. Pemerhatian yang dibuat menunjukkan kadar udara bahan api bermula dari 19 ke 16.3 bagi operasian petrol dan dari 40 ke 18.7 untuk operasian menggunakan gas asli. Emisi ketika operasian menggunakan CNG jelas menunjukkan penurunan ketara ke atas keluaran hidrokarbon (HC), karbon monoksida (CO), karbon dioksida (CO2) dan nitrogen oksida (NOx) dibandingkan dengan operasian menggunakan petrol. Dari segi kos, penggunaan CNG memberikan keuntungan melebihi 50% terhadap kesemua kelajuan rpm enjin jika dibandingkan dengan operasian menggunakan petrol. Kata kunci: NGV, enjin dwi–bahan api, pengunaan bahan api, emisi ekzos, CNG, gas asli Compressed natural gas (CNG) is the most successful and widely used alternative fuel for vehicles in the market today. Petrol fuelled vehicles are fitted with natural gas vehicle (NGV) conversion kit to enable bi-fuel operation between CNG and petrol. This experimental approach is focused on the fuel consumption, exhaust emission and fuel cost between natural gas and petrol operations. The specially constructed test rig comprises of the bi-fuel fuel system employed in the 1500 cc 12 valves carburettor engine NGV taxis. The inherent fuel consumption and corresponding exhaust emission are acquired at different engine revolution per minute (rpm) during petrol and CNG operation separately. The engine rpm operating without load is varied from idle to more than 5000 rpm to acquire the fuel consumption and exhaust emission profile. These two acquired data are then used to calculate the engine’s air fuel ratio. All three parameters acquired are used to conduct comparisons between petrol and natural gas operation. It is seen that the bi-fuel system operates with air fuel ratio ranging from 19 to 16.3 for petrol operation and ranges from 40 to 18.7 for natural gas operations. The emission during CNG operation clearly shows significant decrease in hydrocarbon (HC), carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxide (NOx) over the use of petrol. In terms of cost, the use of CNG provides savings exceeding 50% through all engine rpm compared to petrol non-loaded operations. Key words: NGV, bi–fuel engine, fuel consumption, exhaust emission, CNG, natural gas

scholarly journals Individual Cylinder Combustion Optimization to Improve Performance and Fuel Consumption of a Small Turbocharged SI Engine

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5548
Author(s):  
Luca Marchitto ◽  
Cinzia Tornatore ◽  
Luigi Teodosio
Keyword(s):  
Fuel Consumption ◽  
Internal Combustion Engines ◽  
Fuel Injection ◽  
Combustion Process ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Exhaust Emission ◽  
Cycle Variation ◽  
Spark Timing ◽  
Experimental Findings

Stringent exhaust emission and fuel consumption regulations impose the need for new solutions for further development of internal combustion engines. With this in mind, a refined control of the combustion process in each cylinder can represent a useful and affordable way to limit cycle-to-cycle and cylinder-to-cylinder variation reducing CO2 emission. In this paper, a twin-cylinder turbocharged Port Fuel Injection–Spark Ignition engine is experimentally and numerically characterized under different operating conditions in order to investigate the influence of cycle-to-cycle variation and cylinder-to-cylinder variability on the combustion and performance. Significant differences in the combustion behavior between cylinders were found, mainly due to a non-uniform effective in-cylinder air/fuel (A/F) ratio. For each cylinder, the coefficients of variation (CoVs) of selected combustion parameters are used to quantify the cyclic dispersion. Experimental-derived CoV correlations representative of the engine behavior are developed, validated against the measurements in various speed/load points and then coupled to an advanced 1D model of the whole engine. The latter is employed to reproduce the experimental findings, taking into account the effects of cycle-to-cycle variation. Once validated, the whole model is applied to optimize single cylinder operation, mainly acting on the spark timing and fuel injection, with the aim to reduce the specific fuel consumption and cyclic dispersion.

Sign in / Sign up

Export Citation Format

Share Document