scholarly journals Mott–Hubbard insulating state for the layered van der Waals $$\hbox {FePX}_3$$ (X: S, Se) as revealed by NEXAFS and resonant photoelectron spectroscopy

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Yichen Jin ◽  
Mouhui Yan ◽  
Tomislav Kremer ◽  
Elena Voloshina ◽  
Yuriy Dedkov
Keyword(s):  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
2D Materials ◽  
Van Der Waals ◽  
Deep Understanding ◽  
Density Functional Theory Calculations ◽  
Binding Energies ◽  
Final State ◽  
Spectroscopy Studies ◽  
Low Dimensional

AbstractA broad family of the nowadays studied low-dimensional systems, including 2D materials, demonstrate many fascinating properties, which however depend on the atomic composition as well as on the system dimensionality. Therefore, the studies of the electronic correlation effects in the new 2D materials is of paramount importance for the understanding of their transport, optical and catalytic properties. Here, by means of electron spectroscopy methods in combination with density functional theory calculations we investigate the electronic structure of a new layered van der Waals $$\hbox {FePX}_3$$ FePX 3 (X: S, Se) materials. Using systematic resonant photoelectron spectroscopy studies we observed strong resonant behavior for the peaks associated with the $$3d^{n-1}$$ 3 d n - 1 final state at low binding energies for these materials. Such observations clearly assign $$\hbox {FePX}_3$$ FePX 3 to the class of Mott–Hubbard type insulators for which the top of the valence band is formed by the hybrid Fe-S/Se electronic states. These observations are important for the deep understanding of this new class of materials and draw perspectives for their further applications in different application areas, like (opto)spintronics and catalysis.

scholarly journals Cross-plane transport in a single-molecule two-dimensional van der Waals heterojunction

2020 ◽  
Vol 6 (22) ◽  
pp. eaba6714 ◽  
Author(s):  
Shiqiang Zhao ◽  
Qingqing Wu ◽  
Jiuchan Pi ◽  
Junyang Liu ◽  
Jueting Zheng ◽  
...  
Keyword(s):  
Charge Transport ◽  
Single Molecule ◽  
Density Functional ◽  
Electronic Materials ◽  
2D Materials ◽  
Molecular Layer ◽  
Van Der Waals ◽  
Density Functional Theory Calculations ◽  
Two Dimensional ◽  
Guest Molecules

Two-dimensional van der Waals heterojunctions (2D-vdWHs) stacked from atomically thick 2D materials are predicted to be a diverse class of electronic materials with unique electronic properties. These properties can be further tuned by sandwiching monolayers of planar organic molecules between 2D materials to form molecular 2D-vdWHs (M-2D-vdWHs), in which electricity flows in a cross-plane way from one 2D layer to the other via a single molecular layer. Using a newly developed cross-plane break junction technique, combined with density functional theory calculations, we show that M-2D-vdWHs can be created and that cross-plane charge transport can be tuned by incorporating guest molecules. The M-2D-vdWHs exhibit distinct cross-plane charge transport signatures, which differ from those of molecules undergoing in-plane charge transport.

Efficient Prediction of Structural and Electronic Properties of Hybrid 2D Materials Using DFT and Machine Learning

2018 ◽  
Author(s):  
Sherif Tawfik ◽  
Olexandr Isayev ◽  
Catherine Stampfl ◽  
Joseph Shapter ◽  
David Winkler ◽  
...  
Keyword(s):  
Machine Learning ◽  
Band Gap ◽  
Density Functional ◽  
2D Materials ◽  
Van Der Waals ◽  
Building Blocks ◽  
Machine Learning Techniques ◽  
Interlayer Distance ◽  
Computational Screening ◽  
Wide Range

Materials constructed from different van der Waals two-dimensional (2D) heterostructures offer a wide range of benefits, but these systems have been little studied because of their experimental and computational complextiy, and because of the very large number of possible combinations of 2D building blocks. The simulation of the interface between two different 2D materials is computationally challenging due to the lattice mismatch problem, which sometimes necessitates the creation of very large simulation cells for performing density-functional theory (DFT) calculations. Here we use a combination of DFT, linear regression and machine learning techniques in order to rapidly determine the interlayer distance between two different 2D heterostructures that are stacked in a bilayer heterostructure, as well as the band gap of the bilayer. Our work provides an excellent proof of concept by quickly and accurately predicting a structural property (the interlayer distance) and an electronic property (the band gap) for a large number of hybrid 2D materials. This work paves the way for rapid computational screening of the vast parameter space of van der Waals heterostructures to identify new hybrid materials with useful and interesting properties.

scholarly journals Ultrafast mode-locking in highly stacked Ti3C2Tx MXenes for 1.9-μm infrared femtosecond pulsed lasers

Nanophotonics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1741-1751
Author(s):  
Young In Jhon ◽  
Jinho Lee ◽  
Young Min Jhon ◽  
Ju Han Lee
Keyword(s):  
High Performance ◽  
Density Functional ◽  
2D Materials ◽  
Density Functional Theory Calculations ◽  
Mode Locking ◽  
Infrared Range ◽  
Saturable Absorption ◽  
Pulsed Lasers ◽  
Saturable Absorbers ◽  
Layer Stacking

Abstract Metallic 2D materials can be promising saturable absorbers for ultrashort pulsed laser production in the long wavelength regime. However, preparing and manipulating their 2D structures without layer stacking have been nontrivial. Using a combined experimental and theoretical approach, we demonstrate here that a metallic titanium carbide (Ti3C2Tx), the most popular MXene 2D material, can have excellent nonlinear saturable absorption properties even in a highly stacked state due to its intrinsically existing surface termination, and thus can produce mode-locked femtosecond pulsed lasers in the 1.9-μm infrared range. Density functional theory calculations reveal that the electronic and optical properties of Ti3C2Tx MXene can be well preserved against significant layer stacking. Indeed, it is experimentally shown that 1.914-μm femtosecond pulsed lasers with a duration of 897 fs are readily generated within a fiber cavity using hundreds-of-layer stacked Ti3C2Tx MXene saturable absorbers, not only being much easier to manufacture than mono- or few-layered ones, but also offering character-conserved tightly-assembled 2D materials for advanced performance. This work strongly suggests that as-obtained highly stacked Ti3C2Tx MXenes can serve as superb material platforms for versatile nanophotonic applications, paving the way toward cost-effective, high-performance photonic devices based on MXenes.

scholarly journals Ab Initio Study of Ferroelectric Critical Size of SnTe Low-Dimensional Nanostructures

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 732 ◽  
Author(s):  
Takahiro Shimada ◽  
Koichiro Minaguro ◽  
Tao Xu ◽  
Jie Wang ◽  
Takayuki Kitamura
Keyword(s):  
Density Functional ◽  
Critical Size ◽  
Density Functional Theory Calculations ◽  
Cell Width ◽  
Functional Theory ◽  
Unit Cells ◽  
Principle Density Functional Theory ◽  
Low Dimensional ◽  
Insight Into ◽  
Ferroelectric Perovskite

Beyond a ferroelectric critical thickness of several nanometers existed in conventional ferroelectric perovskite oxides, ferroelectricity in ultimately thin dimensions was recently discovered in SnTe monolayers. This discovery suggests the possibility that SnTe can sustain ferroelectricity during further low-dimensional miniaturization. Here, we investigate a ferroelectric critical size of low-dimensional SnTe nanostructures such as nanoribbons (1D) and nanoflakes (0D) using first-principle density-functional theory calculations. We demonstrate that the smallest (one-unit-cell width) SnTe nanoribbon can sustain ferroelectricity and there is no ferroelectric critical size in the SnTe nanoribbons. On the other hand, the SnTe nanoflakes form a vortex of polarization and lose their toroidal ferroelectricity below the surface area of 4 × 4 unit cells (about 25 Å on one side). We also reveal the atomic and electronic mechanism of the absence or presence of critical size in SnTe low-dimensional nanostructures. Our result provides an insight into intrinsic ferroelectric critical size for low-dimensional chalcogenide layered materials.

First-Principles Analysis on Interaction between Dopant (Ga, Sb) and Contamination Metal Atoms in Ge Crystals

2013 ◽  
Vol 205-206 ◽  
pp. 417-421
Author(s):  
Tatsunori Yamato ◽  
Koji Sueoka ◽  
Takahiro Maeta
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Binding Energies ◽  
Functional Theory ◽  
Substitutional Site ◽  
Metal Impurities ◽  
Metal Atoms ◽  
Total Energies ◽  
Group 3

The lowest energetic configurations of metal impurities in 4throw (Sc - Zn), 5throw (Y - Cd) and 6throw (Hf - Hg) elements in Ge crystals were determined with density functional theory calculations. It was found that the substitutional site is the lowest energetic configuration for most of the calculated metals in Ge. The most stable configurations of dopant (Ga, Sb) - metal complexes in Ge crystals were also investigated. Following results were obtained. (1) For Ga dopant, 1st neighbor T-site is the most stable for metals in group 3 to 7 elements while substitutional site next to Ga atom is the most stable for metals in group 8 to 12 elements. (2) For Sb dopant, substitutional site next to Sb atom is the most stable for all calculated metals. Binding energies of the interstitial metalMiwith the substitutional dopantDswere obtained by the calculated total energies. The calculated results for Ge were compared with those for Si.

scholarly journals Covalent Functionalization of Nickel Phosphide Nanocrystals with Aryl-Diazonium Salts

2021 ◽  
Author(s):  
Ian Murphy ◽  
Peter Rice ◽  
Madison Monahan ◽  
Leo Zasada ◽  
Elisa Miller ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
Binding Energies ◽  
Diazonium Salts ◽  
Surface Functional Group ◽  
Covalent Functionalization ◽  
Substitution Pattern ◽  
Core Electron ◽  
Functional Theory

Covalent functionalization of Ni2P nanocrystals was demonstrated using aryl-diazonium salts. Spontaneous adsorption of aryl functional groups was observed, with surface coverages ranging from 20-96% depending on the native reactivity of the salt as determined by the aryl substitution pattern. Increased coverage was possible for low reactivity species using a sacrificial reductant. Functionalization was confirmed using thermogravimetric analysis, FTIR and X-ray photoelectron spectroscopy. The structure and energetics of this nanocrystal electrocatalyst system, as a function of ligand coverage, was explored with density functional theory calculations. The Hammett parameter of the surface functional group was found to linearly correlate with the change in Ni and P core-electron binding energies and the nanocrystal’s experimentally and computationally determined work-function. The electrocatalytic activity and stability of the functionalized nanocrystals for hydrogen evolution were also improved when compared to the unfunctionalized material, but a simple trend based on electrostatics was not evident. We used density functional theory to understand this discrepancy and found that H adsorption energies on the covalently functionalized Ni2P also do not follow the electrostatic trend and are predictive descriptors of the experimental results.

Theoretical core spectroscopy of molecules interacting with ice surfaces 

2021 ◽  
Author(s):  
Richard Asamoah Opoku
Keyword(s):  
Electronic Properties ◽  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
Trace Gases ◽  
Binding Energies ◽  
Photoelectron Spectra ◽  
Development Fund ◽  
Xps Spectra ◽  
The Core ◽  
Ice Surfaces

<p><strong>Céline TOUBIN</strong><strong><sup>2</sup></strong><strong> and </strong><strong>André Severo Pereira GOMES</strong><strong><sup> 3</sup></strong></p><p><sup>2,3</sup> Laboratoire de Physique des Lasers, des atomes et des Molécules, Université de Lille, Cité Scientifique, 59655 Villeneuve d’Ascq Cedex, France</p><p>E-mail : [email protected]<sup>2</sup> ; [email protected]<sup>3</sup></p><p>Ice plays an essential role as a catalyst for reactions between atmospheric trace gases. The uptake of trace gases to ice has been proposed to have a major impact on geochemical cycles, human health, and ozone depletion in the stratosphere [1]. X-ray photoelectron spectroscopy (XPS) [2], serves as a powerful technique to characterize the elemental composition of such interacting species due to its surface sensitivity. Given the existence of complex physico-chemical processes such as adsorption, desorption, and migration within ice matrix, it is important to establish a theoretical framework to determine the electronic properties of these species under different conditions such as temperature and concentration. The focus of this work is to construct an embedding methodology employing Density Functional (DFT) and Wave Function Theory (WFT) to model and interpret photoelectron spectra of adsorbed halogenated species on ice surfaces at the core level with the highest accuracy possible. </p><p>We make use of an embedding approach utilizing full quantum mechanics to divide the system into subunits that will be treated at different levels of theory [3].</p><p>The goal is to determine core electron binding energies and the associated chemical shifts for the adsorbed halogenated species such as molecular HCl and the dissociated form Cl- at the surface and within the uppermost bulk layer of the ice respectively [4]. The core energy shifts are compared to the data derived from the XPS spectra [4].</p><p>We show that the use of a fully quantum mechanical embedding method, to treat solute-solvent systems is computationally efficient, yet accurate enough to determine the electronic properties of the solute system (halide ion) as well as the long-range effects of the solvent environment (ice).</p><p>We acknowledge support by the French government through the Program “Investissement d'avenir” through the Labex CaPPA (contract ANR-11-LABX-0005-01) and I-SITE ULNE project OVERSEE (contract ANR-16-IDEX-0004), CPER CLIMIBIO (European Regional Development Fund, Hauts de France council, French Ministry of Higher Education and Research) and French national supercomputing facilities (grants DARI x2016081859 and A0050801859).</p><p> </p>

Sign in / Sign up

Export Citation Format

Share Document