Durable flame retardant hybrid sol–gel coating on poly(ethylene terephthalate) fabric and its flame retardant mechanism

2021 ◽  
pp. 004051752110408
Author(s):  
Gu Wei ◽  
Chang Shuo
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Ethylene Terephthalate ◽  
Sol Gel ◽  
Hybrid Coating ◽  
Dynamics Simulation ◽  
Pet Fabric ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

In this paper, an organic/inorganic phosphorus and silicon-containing coating was prepared by the sol–gel method and its flame retardant mechanism for poly(ethylene terephthalate) (PET) fabrics was thoroughly investigated. The influence of hybrid coating on PET fabric was investigated by the limited oxygen index (LOI), vertical flammability test (VFT) and microscale combustion calorimetry (MCC). The results revealed that the LOI of the coated PET fabric was up to 29.2% and no dripping was observed in the VFT. MCC results showed that hybrid coating reduced the peak heat release rate, heat release capacity and total heat release of PET fabric. Thermogravimetric analysis demonstrated increased thermal stability and char residue of PET fabrics due to the hybrid coating. Furthermore, the char residues were studied by X-ray photoelectron spectroscopy and scanning electron microscopy. The above results proved that the synergistic effect between the 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide group and the silicon network played a key role in the flame retardancy of PET fabrics. In addition, the durability of coated PET fabrics was interpreted by calculating the interaction energy through molecular dynamics simulation.

A novel method to bind soybean protein onto the surface of poly(ethylene terephthalate) fabric

2016 ◽  
Vol 87 (4) ◽  
pp. 460-473
Author(s):  
Jianfeng Zhou ◽  
Dandan Zheng ◽  
Fengxiu Zhang ◽  
Guangxian Zhang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Ethylene Terephthalate ◽  
Soybean Protein ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pet Fabric ◽  
Poly Ethylene Terephthalate ◽  
Pet Fibers ◽  
Diffraction Patterns ◽  
Poly Ethylene

In this study, –NH2 groups were introduced to a poly(ethylene terephthalate) (PET) fabric to make the fabric hydrophilic and, then, soybean protein was bonded on the surface of the modified PET fabric to obtain a soybean protein/PET composite fabric. The –NH2 groups allowed the soybean protein to be firmly bonded on the surface of the modified PET fabric. Scanning electron microscopy images showed that the surface of each modified PET fiber had a small number of grooves and that there was a thin film on each soybean protein/PET fiber. Attenuated total reflectance Fourier transform infrared spectra demonstrated that the nitrated and reduced PET fibers were introduced –NH2 groups and that there were –CO–NH– groups on the surface of soybean protein/PET fibers. X-ray photoelectron spectroscopy analyses showed that there was a nitrogen element on the modified PET fibers. The X-ray diffraction patterns suggested that the crystal structures of the modified fibers did not change significantly during the modification processes. The thermogravimetry results showed that the thermal stability of soybean protein/PET fiber kept well. The wearability tests indicated that the breaking strength and elasticity of the original fabric were well retained by the modified fabrics. The soybean protein/PET fabric had good levels of hydrophilicity and softness when the binding rate was below 3.0%.

scholarly journals Interfacial Adhesion and Mechanical Properties of PET Fabric/PVC Composites Enhanced by SiO2/Tributyl Citrate Hybrid Sizing

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 898
Author(s):  
Dandan Pu ◽  
Fuyao Liu ◽  
Yubing Dong ◽  
Qingqing Ni ◽  
Yaqin Fu
Keyword(s):  
Interfacial Adhesion ◽  
Ethylene Terephthalate ◽  
Sio2 Nanoparticles ◽  
New Approach ◽  
Pet Fabric ◽  
Poly Ethylene Terephthalate ◽  
Wide Range ◽  
Peeling Strength ◽  
Poly Ethylene

Poly(ethylene terephthalate) (PET) fabric-reinforced polyvinyl chloride (PVC) composites have a wide range of applications, but the interface bonding of PET fabric/PVC composites has remained a challenge. In this work, a new in-situ SiO2/tributyl citrate sizing agent was synthesized according to the principle of “similar compatibility.” The developed sizing agent was used as a PET surface modifier to enhance the interfacial performance of PET fabric/PVC composites. The morphology and structure of the PET filaments, the wettability and tensile properties of the PET fabric, the interfacial adhesion, and the tensile and tearing properties of the PET fabric/PVC composites were investigated. Experimental results showed that many SiO2 nanoparticles were scattered on the surface of the modified PET filaments. Moreover, the surface roughness of the modified PET filaments remarkably increased in comparison with that of the untreated PET filaments. The contact angle of the modified PET filaments was also smaller than that of the untreated ones. The peeling strength of the modified PET fabrics/PVC composites was 0.663 N/mm, which increased by 62.50% in comparison with the peeling strength of the untreated ones (0.408 N/mm). This work provides a new approach to the surface modification of PET and improves the properties of PET fabric/PVC composites.

Surface Characterization and In Vitro Blood Compatibility of Poly(Ethylene Terephthalate) Immobilized with Hirudin

2005 ◽  
Vol 288-289 ◽  
pp. 421-424
Author(s):  
F. Li ◽  
Jin Wang ◽  
H. Sun ◽  
Nan Huang
Keyword(s):  
Free Energy ◽  
Photoelectron Spectroscopy ◽  
Surface Characterization ◽  
Ethylene Terephthalate ◽  
Blood Compatibility ◽  
Argon Plasma ◽  
Angle Measurement ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

Poly(ethylene terephthalate) films were exposed under argon plasma glow discharge and induced polymerization of acrylic acid (AA) in order to introduce carboxylic acid group onto PET (PET-AA) assisting by ultroviolet radiation. Hirudin-immobilized PETs were prepared by the grafting of PET-AA, followed by chemical reaction with hirudin. The surface structure of the treated PET is determined by X-ray photoelectron spectroscopy (XPS). The wettability and surface free energy, interface free energy of the films is investigated by contact angle measurement. Platelet adhesion evaluatiion is conducted to examine the blood compatibility in vitro. Scanning electron microscopy (SEM) and optical microscopy reveal that the amounts of adhered, aggregated and morphologically changed platelets are reduced on hirudin-immobilized PET films.

Preparation and Characterization of Flame Retardant PET Fiber via Melt Blending

2018 ◽  
Vol 913 ◽  
pp. 729-737
Author(s):  
Hui Ling Xu ◽  
Hong Kun Bao ◽  
Chao Sheng Wang ◽  
Hua Ping Wang
Keyword(s):  
Flame Retardant ◽  
Ethylene Terephthalate ◽  
Carbon Layer ◽  
Melt Blending ◽  
Fiber Fracture ◽  
Limiting Oxygen Index ◽  
Poly Ethylene Terephthalate ◽  
Blending Method ◽  
Poly Ethylene

Poly(ethylene terephthalate) (PET) fiber with excellent flame retardant property was prepared with introducing a containing phosphorus flame retardant 10-(2’,5’-dihydroxyphenyl) -9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (ODOPB) into PET by melt blending method. The intrinsic viscosity of the modified PET was decreased after melt blending, indicated that ODOPB could promote the degradation of PET. The addition of ODOPB can increase the amount of carbon residue of PET, which can effectively reduce the heat transfer. The movement and regularity of PET molecular chain are affected by ODOPB, resulting in the reducing of the crystallization of PET. The Raman curves indicate that the addition of ODOPB can improve the regularity of carbon layer, which is conducive to achieve the effect of flame retardant. When the mass fraction of P is 0.7 %, the limiting oxygen index of sample reaches 32.4% and UL-94 vertical reaches V-2, the fiber fracture strength is 2.6 cN/dtex, which has excellent flame retardant and mechanical properties.

Synthesis and sizing performances of water-soluble polyester based on bis(2-hydroxyethyl) terephthalate derived from depolymerized waste poly(ethylene terephthalate) fabrics

2018 ◽  
Vol 89 (4) ◽  
pp. 572-579 ◽  
Author(s):  
Jing Lu ◽  
Mengjuan Li ◽  
Yanyan Li ◽  
Xiaoqiang Li ◽  
Qiang Gao ◽  
...  
Keyword(s):  
Surface Tension ◽  
Fourier Transform ◽  
Ethylene Terephthalate ◽  
Water Soluble ◽  
Chemical Recycling ◽  
Step Method ◽  
Pet Fabric ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Viscosity Stability

This work aimed at effective chemical recycling of waste poly(ethylene terephthalate) (PET) fabrics into water-soluble polyester (WSP). For this, PET fabric waste was depolymerized using excess ethylene glycol (EG) in the presence of zinc acetate as catalyst. The glycolysis product of PET, bis(2-hydroxyethyl) terephthalate (BHET) was then used to synthesize WSP by a three-step method, that is, transesterification, esterification and polycondensation. The structures of BHET and WSP were identified by Fourier transform infrared spectra. Sizing performances of WSP were studied, and it was found that the surface tension of WSP size (57 mN/m, 22℃, 0.5% of weight) was lower than common sizes, the viscosity of WSP size was 1–2 mPa·S (95℃, 6% of weight) and the viscosity stability was larger than 90% at this temperature. The mixture of WSP and starch showed stronger adhesion to polyester–cotton roving and polyester roving than onefold starch. K/ S values of fibers before sizing and after desizing showed a slightly difference, which indicated that WSP would not influence the color of yarns when used as the sizing agent.

scholarly journals Construction of Carbon Microspheres-Based Silane Melamine Phosphate Hybrids for Flame Retardant Poly(ethylene Terephthalate)

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 545 ◽  
Author(s):  
Baoxia Xue ◽  
Ruihong Qin ◽  
Jie Wang ◽  
Mei Niu ◽  
Yongzhen Yang ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Ethylene Terephthalate ◽  
Hydrothermal Reaction ◽  
Reaction System ◽  
Fire Risk ◽  
Carbon Microspheres ◽  
Limiting Oxygen Index ◽  
Melamine Phosphate ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

To improve the flame retardancy and inhibit the smoke of poly(ethylene terephthalate) (PET), carbon microspheres (CMSs)-based melamine phosphate (MP) hybrids (MP-CMSs) were constructed in situ with the introduction of CMSs into the hydrothermal reaction system of MP. The integrated MP-CMSs were modified by 3-Aminopropyltriethoxysilane (APTS) to obtain the silane MP-CMSs (SiMP-CMSs) to strengthen the interface binding between the MP-CMSs and PET matrix. The results showed that the SiMP layer was loaded on the CMSs surface. The addition of only 3% SiMP-CMSs increased the limiting oxygen index (LOI) value of the PET from 21% ± 0.1% to 27.7% ± 0.3%, reaching a V-0 burning rate. The SiMP-CMSs not only reduced heat damage, but also inhibited the smoke release during PET combustion, whereupon the peak heat release rate (pk-HRR) reduced from 513.2 to 221.7 kW/m2, and the smoke parameters (SP) decreased from 229830.2 to 81892.3 kW/kg. The fire performance index (FPI) rose from 0.07 m2s/kW to 0.17 m2s/kW, demonstrating the lower fire risk. The proportion of the flame-retardant mode in the physical barrier, flame inhibition, and char effects were recorded as 44.53%, 19.04%, and 9.04%, respectively.

Sign in / Sign up

Export Citation Format

Share Document