Research on acoustic behaviors of water pipelines with guide vanes

2022 ◽  
pp. 107754632110623
Author(s):  
Xianzhong Wang ◽  
Ning Li ◽  
Min Yu ◽  
Hongzhou Lin ◽  
Lili Ye
Keyword(s):  
Noise Reduction ◽  
Guide Vane ◽  
Experimental Methods ◽  
Guide Vanes ◽  
Experimental Platform ◽  
Flow Noise ◽  
Water Pipelines ◽  
Flow Speeds ◽  
Radiation Noise ◽  
Reduction Effect

In this paper, the pipeline with guide vanes was taken as the research object, the flow noise was studied based on the hybrid calculation method, then the acoustic-structure coupling method was introduced to study the vibration and radiation noise, and then explored the best position of the guide vanes. Based on the pipeline experimental platform and improved experimental methods, it was found that the guide vanes had a better noise reduction effect on the elbows; based on that, a simulation study was carried out on the elbow with guide vanes, and the mechanism of the guide vanes on the velocity field and pulsating pressure of the pipeline was explored. Finally, the noise reduction effect at different positions of the guide vanes under different flow speeds was studied. The results indicated that the guide vane at the middle of the elbow had the best effect on improving the flow field and reducing noise in the working conditions studied in this article, providing a calculation basis for the design of the guide vane.

scholarly journals Noise Reduction Effect of Superhydrophobic Surfaces with Streamwise Strip of Channel Flow

2021 ◽  
Vol 11 (9) ◽  
pp. 3869
Author(s):  
Chen Niu ◽  
Yongwei Liu ◽  
Dejiang Shang ◽  
Chao Zhang
Keyword(s):  
Reynolds Number ◽  
Drag Reduction ◽  
Noise Reduction ◽  
Channel Flow ◽  
Superhydrophobic Surface ◽  
Sound Field ◽  
Flow Noise ◽  
Slip Boundary ◽  
Eddy Simulation ◽  
Reduction Effect

Superhydrophobic surface is a promising technology, but the effect of superhydrophobic surface on flow noise is still unclear. Therefore, we used alternating free-slip and no-slip boundary conditions to study the flow noise of superhydrophobic channel flows with streamwise strips. The numerical calculations of the flow and the sound field have been carried out by the methods of large eddy simulation (LES) and Lighthill analogy, respectively. Under a constant pressure gradient (CPG) condition, the average Reynolds number and the friction Reynolds number are approximately set to 4200 and 180, respectively. The influence on noise of different gas fractions (GF) and strip number in a spanwise period on channel flow have been studied. Our results show that the superhydrophobic surface has noise reduction effect in some cases. Under CPG conditions, the increase in GF increases the bulk velocity and weakens the noise reduction effect. Otherwise, the increase in strip number enhances the lateral energy exchange of the superhydrophobic surface, and results in more transverse vortices and attenuates the noise reduction effect. In our results, the best noise reduction effect is obtained as 10.7 dB under the scenario of the strip number is 4 and GF is 0.5. The best drag reduction effect is 32%, and the result is obtained under the scenario of GF is 0.8 and strip number is 1. In summary, the choice of GF and the number of strips is comprehensively considered to guarantee the performance of drag reduction and noise reduction in this work.

scholarly journals Study on flow noise characteristics of Bionic cylinder based on acoustic analogy

2021 ◽  
Vol 336 ◽  
pp. 01003
Author(s):  
Zixian Cui ◽  
Hao Song ◽  
Qi Li ◽  
Buchao An ◽  
Lin Su
Keyword(s):  
Noise Reduction ◽  
Reynolds Numbers ◽  
Wake Flow ◽  
Cylinder Surface ◽  
Acoustic Analogy ◽  
Fluctuating Pressure ◽  
Flow Noise ◽  
Noise Characteristics ◽  
Reduction Effect ◽  
Serrated Structure

The drag and noise reduction of the flow around a cylinder is one of the important topics in hydrodynamics and acoustics. In this paper, three typical bionic cylinders are designed based on the serrated structure on the surface of shark skin. Using Large eddy turbulence model and Lighthill’s acoustic analogy method, the flow noise characteristics of smooth cylinder and three kinds of bionic cylinders at different Reynolds numbers were compared, and the structure of cylinder surface was optimized. The results show that the main source of the flow noise around a cylinder is dipole noise, which is caused by the periodic fluctuating pressure on the cylinder surface.The bionic cylinder can reduce the amplitude of the fluctuating pressure, improve the wake flow field and reduce the wake vorticity, so as to reduce the noise. Among the three kinds of bionic cylinder, V-shaped bionic cylinder has the best noise reduction effect, and the critical value of S/H of V-shaped cylinder is about 2.5. When s / h > 2.5, V-shaped bionic cylinder has no effect of noise reduction.

Comparison of Noise Reduction Performance Evaluation Methods for Low-Noise Pavement in Korea- Part

2021 ◽  
Vol 263 (4) ◽  
pp. 2930-2939
Author(s):  
Byungchae Kim ◽  
Hyunjin Kim ◽  
Wonuk Kang
Keyword(s):  
Noise Reduction ◽  
Noise Level ◽  
Measurement Method ◽  
Road Traffic ◽  
Low Noise ◽  
Management Standards ◽  
Close Proximity ◽  
Porous Pavement ◽  
Reduction Effect ◽  
Measurement Location

In Korea, road noise is assessed as a measurement method of exterior noise emitted by road vehicle for management standards by the National Institute of Environmental Sciences. In this method, the noise felt at the actual pickup point is measured as LAeq (the roadside equivalent noise level). Recently, to clarify the standard for measuring noise on low-noise pavements, the CPX (ISO11819-2; Close-proximity method) was first introduced in the Porous Pavement Guidelines of the Ministry of Land, Infrastructure and Transport. According to ISO, the CPX adopts the side microphone as a mandatory measurement location, and the rear optional. The side location has been a mandatory due to its high correlation with SPB (ISO 11819-1, Statistical Pass-by method). However, according to our previous study on the correlation evaluation between L and CPX rear microphone noise level, both noise reduction effect was about 9-12 dB(A) showed a high correlation in Korea where heavy road traffic is common. The following study aims to show the consistent correlation between the L and CPX rear noise level. Furthermore, it is intended to be helpful in selecting the location of the CPX microphone that can most effectively represent the actual noise on the low-noise pavement in Korea.

The Effect of the Thickness and Angle of the Inlet and Outlet Guide Vane on the Performance of Axial-Flow Pump

2016 ◽  
Author(s):  
Sang-Won Kim ◽  
Youn-Jea Kim
Keyword(s):  
Numerical Analysis ◽  
Numerical Study ◽  
Guide Vane ◽  
Axial Flow ◽  
Inlet Guide Vane ◽  
Guide Vanes ◽  
Pump Performance ◽  
Blade Thickness ◽  
Axial Flow Pump ◽  
Flow Pump

An axial-flow pump has a relatively high discharge flow rate and specific speed at a relatively low head and it consists of an inlet guide vane, impeller, and outlet guide vane. The interaction of the flow through the inlet guide vane, impeller, and outlet guide vane of the axial-flow pump has a significant effect on its performance. Of those components, the guide vanes especially can improve the head and efficiency of the pump by transforming the kinetic energy of the rotating flow, which has a tangential velocity component, into pressure energy. Accordingly, the geometric configurations of the guide vanes such as blade thickness and angle are crucial design factors for determining the performance of the axial-flow pump. As the reliability of Computational Fluid Dynamics (CFD) has been elevated together with the advance in computer technology, numerical analysis using CFD has recently become an alternative to empirical experiment due to its high reliability to measure the flow field. Thus, in this study, 1,200mm axial-flow pump having an inlet guide vane and impeller with 4 blades and an outlet guide vane with 6 blades was numerically investigated. Numerical study was conducted using the commercial CFD code, ANSYS CFX ver. 16.1, in order to elucidate the effect of the thickness and angle of the guide vanes on the performance of 1,200mm axial-flow pump. The stage condition, which averages the fluxes between interfaces and is accordingly appropriate for the evaluation of pump performance, was adopted as the interface condition between the guide vanes and the impeller. The rotational periodicity condition was used in order to enable a simplified geometry to be used since the guide vanes feature multiple identical regions. The shear stress transport (SST) k-ω model, predicting the turbulence within the flow in good agreement, was also employed in the CFD calculation. With regard to the numerical simulation results, the characteristics of the pressure distribution were discussed in detail. The pump performance, which will determine how well an axial-flow pump will work in terms of its efficiency and head, was also discussed in detail, leading to the conclusion on the optimal blade thickness and angle for the improvement of the performance. In addition, the total pressure loss coefficient was considered in order to investigate the loss within the flow paths depending on the thickness and angle variations. The results presented in this study may give guidelines to the numerical analysis of the axial-flow pump and the investigation of the performance for further optimal design of the axial-flow pump.

Hydraulic Characteristics of the New Type Bulb Turbine With Micro-Head

2013 ◽  
Author(s):  
Lingyu Li ◽  
Yuan Zheng ◽  
Daqing Zhou ◽  
Zihao Mi
Keyword(s):  
Numerical Simulation ◽  
Cfd Simulation ◽  
Guide Vane ◽  
Three Dimensional ◽  
Flow Distribution ◽  
Three Dimensions ◽  
Guide Vanes ◽  
Runner Blade ◽  
Cfd Method ◽  
Bulb Turbine

The head of low-head hydropower stations is generally higher than 2.5m in the world, while micro-head hydropower resources which head is less than 2.5m are also very rich. In the paper, three-dimensional CFD method has been used to simulate flow passage of the micro-head bulb turbine. The design head and unit flow of the turbine was 1m and 3m3/s respectively. With the numerical simulation, the bulb turbine is researched by analyzing external characteristics of the bulb turbine, flow distribution before the runner, pressure distribution of the runner blade surface, and flow distribution of the outlet conduit under three different schemes. The turbine in second scheme was test by manufactured into a physical model. According to the results of numerical simulation and model test, bulb turbine with no guide vane in second scheme has simpler structure, lower cost, and better flow capacity than first scheme, which has traditional multi-guide vanes. Meanwhile, efficiency of second scheme has just little decrease. The results of three dimensions CFD simulation and test results agree well in second scheme, and higher efficiency is up to 77% which has a wider area with the head of 1m. The curved supports in third scheme are combined guide vanes to the fixed supports based on 2nd scheme. By the water circulations flowing along the curved supports which improve energy transformation ability of the runner, the efficiency of the turbine in third scheme is up to 82.6%. Third scheme, which has simpler structure and best performance, is appropriate for the development and utilization of micro-head hydropower resources in plains and oceans.

Computational fluid dynamic analysis of roof-mounted vertical-axis wind turbine with diffuser shroud, flange, and vanes

2018 ◽  
Vol 42 (4) ◽  
pp. 404-415
Author(s):  
H. Abu-Thuraia ◽  
C. Aygun ◽  
M. Paraschivoiu ◽  
M.A. Allard
Keyword(s):  
Wind Turbine ◽  
Urban Areas ◽  
Guide Vane ◽  
Fluid Dynamic ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Guide Vanes ◽  
Turbine Design

Advances in wind power and tidal power have matured considerably to offer clean and sustainable energy alternatives. Nevertheless, distributed small-scale energy production from wind in urban areas has been disappointing because of very low efficiencies of the turbines. A novel wind turbine design — a seven-bladed Savonius vertical-axis wind turbine (VAWT) that is horizontally oriented inside a diffuser shroud and mounted on top of a building — has been shown to overcome the drawback of low efficiency. The objective this study was to analyze the performance of this novel wind turbine design for different wind directions and for different guide vanes placed at the entrance of the diffuser shroud. The flow field over the turbine and guide vanes was analyzed using computational fluid dynamics (CFD) on a 3D grid for multiple tip-speed ratios (TSRs). Four wind directions and three guide-vane angles were analyzed. The wind-direction analysis indicates that the power coefficient decreases to about half when the wind is oriented at 45° to the main axis of the turbine. The analysis of the guide vanes indicates a maximum power coefficient of 0.33 at a vane angle of 55°.

Sign in / Sign up

Export Citation Format

Share Document