scholarly journals Thermomechanical response of a viscoelastic Ni-Ti – Shape Memory Alloy composite beam

2019 ◽  
Vol 16 (2) ◽  
pp. 32-39
Author(s):  
Diego Andrés Campo-Ceballos ◽  
Emanuelle Pacheco Rocha-Lima ◽  
Flaminio Levy-Neto
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Niti Alloy ◽  
External Diameter ◽  
X Ray Diffraction ◽  
Austenitic Phase ◽  
Three Point Bending ◽  
Machine Vibration ◽  
Smart Beam ◽  
Circular Bar

This investigation is concerned with the mechanical behavior of Shape Memory Alloy Hybrid Composite Beams (SMAHC), that consist of a circular bar of NiTi alloy incorporated in a 500 mm long cylindrical pipe of polypropylene (PP), with external diameter 50 mm and nominal wall thickness 7 mm, wound with a nylon/epoxy layer. The Ni-Ti alloy was characterized using: scanning electron microscopy (SEM); X-ray diffraction (XRD) and Differential thermal analysis (DSC). The nominal chemical composition of the alloy is 50.05 %Ni / 49.95%Ti, and the softer martensite is the predominant phase at room temperature. The approximate martensite (M) to Austenitic (A) phase transformation temperatures were Mstart = 32°C, Mfinal = 46°C, Astart = 38 °C and Afinal = 60°C. For temperature T<Mfinal, Ni-Ti bar presents 100% martensitic phase, whereas for T>Afinal it is fully converted in the Austenitic phase; and its elasticity modulus increases by a factor up to three times. This significant change in stiffness of Ni-Ti, without changing its mass, has motivated the application of such alloy in machine vibration control. The SMAHC beams were subjected to static three-point bending tests, in the elastic regime. Experimental results showed that, in average, at 21°C, the PP pipes effective flexural elastic modulus increased 112%, from 757 MPa to 1609 MPa, when the Ni-Ti bar and the external layer of nylon/epoxy were incorporated to the PP pipe, creating a smart beam. These last results indicate that the SMAHC beam can work as an adaptative structure.

scholarly journals Key Properties of a Bioactive Ag-SiO2/TiO2 Coating on NiTi Shape Memory Alloy as Necessary at the Development of a New Class of Biomedical Materials

2021 ◽  
Vol 22 (2) ◽  
pp. 507
Author(s):  
Mateusz Dulski ◽  
Robert Gawecki ◽  
Sławomir Sułowicz ◽  
Michal Cichomski ◽  
Alicja Kazek-Kęsik ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Dermal Fibroblast ◽  
Niti Alloy ◽  
Bacterial Biofilm ◽  
Niti Shape Memory Alloy ◽  
Normal Human Dermal Fibroblast ◽  
Water Contact ◽  
Nano Coating

Recent years have seen the dynamic development of methods for functionalizing the surface of implants using biomaterials that can mimic the physical and mechanical nature of native tissue, prevent the formation of bacterial biofilm, promote osteoconduction, and have the ability to sustain cell proliferation. One of the concepts for achieving this goal, which is presented in this work, is to functionalize the surface of NiTi shape memory alloy by an atypical glass-like nanocomposite that consists of SiO2-TiO2 with silver nanoparticles. However, determining the potential medical uses of bio(nano)coating prepared in this way requires an analysis of its surface roughness, tribology, or wettability, especially in the context of the commonly used reference coat-forming hydroxyapatite (HAp). According to our results, the surface roughness ranged between (112 ± 3) nm (Ag-SiO2)—(141 ± 5) nm (HAp), the water contact angle was in the range (74.8 ± 1.6)° (Ag-SiO2)—(70.6 ± 1.2)° (HAp), while the surface free energy was in the range of 45.4 mJ/m2 (Ag-SiO2)—46.8 mJ/m2 (HAp). The adhesive force and friction coefficient were determined to be 1.04 (Ag-SiO2)—1.14 (HAp) and 0.247 ± 0.012 (Ag-SiO2) and 0.397 ± 0.034 (HAp), respectively. The chemical data showed that the release of the metal, mainly Ni from the covered NiTi substrate or Ag from Ag-SiO2 coating had a negligible effect. It was revealed that the NiTi alloy that was coated with Ag-SiO2 did not favor the formation of E. coli or S. aureus biofilm compared to the HAp-coated alloy. Moreover, both approaches to surface functionalization indicated good viability of the normal human dermal fibroblast and osteoblast cells and confirmed the high osteoconductive features of the biomaterial. The similarities of both types of coat-forming materials indicate an excellent potential of the silver-silica composite as a new material for the functionalization of the surface of a biomaterial and the development of a new type of functionalized implants.

EFFECTS OF PARTICLE SIZE AND SINTERING TEMPERATURE ON SUPERELASTICITY BEHAVIOR OF NiTi SHAPE MEMORY ALLOY USING NANOINDENTATION

2021 ◽  
pp. 2150024
Author(s):  
C. VELMURUGAN ◽  
V. SENTHILKUMAR
Keyword(s):  
Particle Size ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Sintering Temperature ◽  
Niti Alloy ◽  
Indentation Load ◽  
Niti Shape Memory Alloy ◽  
Recovery Ratio ◽  
Work Recovery ◽  
Niti Sma

The present study investigates the superelasticity properties of spark plasma sintered (SPS) nickel titanium shape memory alloy (NiTi SMA) with the influence of sintering temperature and particle size. The nanoindentation is conducted on the surface of the NiTi SMA at various loads such as 100, 300 and 500[Formula: see text]mN. The nanoindentation technique determines the quantitative results of elasto-plastic properties such as depth recovery in the form of superelasticity, stiffness, hardness and work recovery ratio from load–depth ([Formula: see text]–[Formula: see text]) data during loading and unloading of the indenter. Experimental findings show that the depth and work recovery ratio increases with the decrease of indentation load and particle size. In contrast, increasing the sintering temperature exhibited a better depth and work recovery due to the removal of pores which could enhance the reverse transformation. The contact stiffness is influenced by [Formula: see text] which leads to attain a maximum stiffness at the highest load (500[Formula: see text]mN) and particle size (45[Formula: see text][Formula: see text]m) along with the lowest sintering temperature (700∘C). NiTi alloy exhibited a maximum hardness of 9.46[Formula: see text]GPa when subjected to indent at the lowest load and particle size sintered at 800∘C. The present study reveals a better superelastic behavior in NiTi SMA by reducing the particle size and indentation load associated with the enhancement of sintering temperature.

scholarly journals Nanocrystal, phase transformation and microstructure of Ni50Ti50 shape memory alloy

2018 ◽  
Vol 24 (02) ◽  
pp. 22-25
Author(s):  
Dovchinvanchig M ◽  
Chunwang Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Transformation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
One Step ◽  
Niti Matrix ◽  
Electronic Microscope

The nanocrystal, phase transformation and microstructure behavior of Ni50Ti50 shape memory alloy was investigated by scanning electronic microscope, X-ray diffraction and differential scanning calorimetry. The results showed that the microstructure of Ni-Ti binary alloy consists of the NiTi2 phase and the NiTi matrix phase. One-step phase transformation was observed alloy.

Evaluation of the Mechanical Properties of Glass/Epoxy Composite by Embedding Shape Memory Alloy and Nanoclay

2021 ◽  
Vol 1019 ◽  
pp. 3-11
Author(s):  
Niranjan Pattar ◽  
S.F. Patil ◽  
Pratik Patil ◽  
Iranna Anikivi ◽  
Shridhar Hiremath
Keyword(s):  
Electron Microscopy ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Smart Materials ◽  
Epoxy Composite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Clay Concentration ◽  
Impact Characteristics

Embedding smart materials in the composite to enhance mechanical strength have become a research hotspot owing to their unique properties. The present research also focus on novel way to fabricate composite by embedding Shape Memory Alloy (SMA) wire and montmorillonite (MMT) nanoclay by varying clay concentration (0-7 wt.%). The extent of dispersion of nanoclay in epoxy resin was studied using Transmission Electron Microscopy (TEM) and X-ray diffraction (XRD). Fabricated samples were examined for tensile, flexural and impact characteristics. Scanning Electron Microscopy (SEM) was used to study the adhesion, delamination and damage occurred within the composite due to tensile loading. Results shows that the tensile strength, flexural strength and impact energy of SMA/MMT/glass/epoxy composite was improved by 23%, 21% and 57% respectively, when it was compared with composite with glass/epoxy composite.

Viscoelastic behavior of epoxy resin reinforced with shape-memory-alloy wires

2020 ◽  
pp. 1045389X2097549
Author(s):  
Niloufar Bagheri ◽  
Mahmood M Shokrieh ◽  
Ali Saeedi
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Epoxy Resin ◽  
Volume Fraction ◽  
Niti Alloy ◽  
Micromechanical Model ◽  
Viscoelastic Behavior ◽  
Mechanical Analysis ◽  
Reinforced Polymer ◽  
Small Volume Fraction

The effect of NiTi alloy long wires on the viscoelastic behavior of epoxy resin was investigated by utilizing the dynamic mechanical analysis (DMA) and a novel micromechanical model. The present model is capable of predicting the viscoelastic properties of the shape-memory-alloy (SMA) reinforced polymer as a function of the SMA volume fraction, initial martensite volume fraction, pre-strain level in wires, and the temperature variations. The model was verified by conducting experiments. Good agreement between the theoretical and experimental results was achieved. A parametric study was also performed to investigate the effect of SMA parameters. According to the results, by the addition of a small volume fraction of SMA, the storage modulus of the composite increases significantly, especially at higher temperatures. Moreover, applying a 4% pre-strain caused a 10% increase in the maximum value of the loss factor of the SMA reinforced epoxy in comparison with the 0% pre-strained SMA reinforced epoxy.

scholarly journals Study of CuAlBe Shape Memory Alloy by X-Ray Diffraction

1995 ◽  
Vol 05 (C2) ◽  
pp. C2-269-C2-274 ◽  
Author(s):  
F. Moreau ◽  
A. Tidu ◽  
Ph. Barbe ◽  
A. Eberhardt ◽  
J. J. Heizmann
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
X Ray Diffraction ◽  
X Ray

409 Crystal Structure of Ti-Ni Shape Memory Alloy : Part I ; X-ray Diffraction of Ti and Ni

2001 ◽  
Vol 2001 (0) ◽  
pp. 373-374
Author(s):  
Hajime KAYANO ◽  
Mitsuo NOUTOMI ◽  
Hisao HASEGAWA ◽  
Haruo SHIMOSAKA ◽  
Noburou EHARA
Keyword(s):  
Crystal Structure ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
X Ray Diffraction ◽  
X Ray ◽  
Alloy Part

Phase Transformation in Ti-Ni-Ta Shape Memory Alloy

2007 ◽  
Vol 130 ◽  
pp. 147-150 ◽  
Author(s):  
Zdzisław Lekston ◽  
Tomasz Goryczka
Keyword(s):  
Phase Transformation ◽  
Martensitic Transformation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Medical Application ◽  
Precipitation Process ◽  
X Ray Diffraction ◽  
Martensitic Transformation Temperature ◽  
X Ray ◽  
Solution Treated

A new Ti50Ni48.7Ta1.3 shape memory alloy was designed for medical application. In order to influence the martensitic transformation temperature the alloy was solution treated and additionally aged at 400oC for various time. Phase transformation was studied applying differential scanning calorimeter (DSC) and X-ray diffraction techniques. The ageing causes that the martensitic transformation occurs in two steps: B2↔R↔B19’ during cooling and heating. During cooling the transformations: B2→R and R→B19’ are well separated whereas on heating they are overlapped. Also ageing causes a shift of temperatures of the martensitic transformation into the higher region. It is due to the precipitation process. Precipitates of the Ni4Ti3 phase were observed. Applied thermal treatment leads to shift of the transformation temperatures below temperature of a human body. This makes the Ti-Ni-Ta alloy attractive for application in medicine.

Sign in / Sign up

Export Citation Format

Share Document