scholarly journals Determination of the Heavy Metal Contents and the Benefit/Cost Analysis of Hypericum salsugineum in the Vicinity of Salt Lake

2021 ◽  
Vol 50 (12) ◽  
pp. 3493-3503
Author(s):  
Aynur Demir ◽  
Gökçen Baysal Furtana ◽  
Mehtap Tekşen ◽  
Rukiye Tipirdamaz
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Salt Lake ◽  
Benefit Cost Analysis ◽  
Metal Contents ◽  
Copper Zinc ◽  
Useful Life ◽  
Benefit Cost ◽  
Potential Use

In this study, Hypericum salsugineum, an endemic halophytic plant growing around Salt Lake, was analyzed to determine the heavy metals (chromium, lead, copper, zinc and nickel) on it and on the soil it grew. The phytoremediation potential of H. salsugineum was evaluated. In addition, the benefit cost (B/C) analysis was performed for its potential use in phytoremediation. The plant and soil samples were collected from Eskil and Cihanbeyli between May and September in 2016. A total of 300 soil and plant samples were analysed for heavy metal content. Statistical and standard benefit/cost analyses were performed for assessment. The capacity of accumulating the aforementioned heavy metals was found to be high in H. salsugineum. It was found that Ni and Pb ratio exceeded optimum values in its habitat, and H. salsugineum accumulated available Ni and Pb. When the plant was evaluated in terms of benefit/cost, B/C ratio was greater than 1 during the useful life of the study. This conclusion increases the ecological and economical values of H. Salsugineum, effecting its potential use in phytoremediation.

scholarly journals Determination of Molybdenum Contents and Relation of Some Heavy Metals in the Soil of Meadow-Pasture Terraces Between Kırıkhan-Reyhanlı

2019 ◽  
Vol 7 (1) ◽  
pp. 13 ◽  
Author(s):  
Mehmet Yalçın ◽  
Kerim Mesut Çimrin
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Pollution ◽  
Soil Samples ◽  
Molybdenum Content ◽  
Limit Values ◽  
Significant Relationships ◽  
Metal Contents ◽  
Different Depths

This study was aimed to determine the molybdenum content of meadow - pasture soil between Kırıkhan and Reyhanlı in Hatay province and to determine the relations of the molybdenum content with some heavy metals in the soil. For this purpose, two different depths (0-20 and 20-40 cm) representing grassland pasture lands and 80 soil samples from 40 different points were taken. Cadmium (Cd), Cobalt (Co), Nickel (Ni), Lead (Pb), Copper (Cu), Iron (Fe), and Molybdenum (Mo) contents were determined in the soil samples. The contents of the available Cd, Co, Pb, Cu, Fe, Ni and Mo of the soil were determined by reading the 0.005 M DTPA + 0.01 M CaCl2 + 0.1 M TEA extracts in the ICP instrument. The results of the research shows that the Cd contents of the soils are between 0.01-0.32 ppm; Co contents are from 0.01 to 4.97 ppm; Ni contents 0.00 to 20.00 ppm; Pb contents 3.00-67.00 ppm; Cu contents 0.26-7.48 ppm; The Fe contents are between 4.00 and 61.00 and the Mo contents are between 0.001 and 0.064 ppm. It was determined that there are significant positive relationships between Co, Ni, Pb, Cu and Fe contents of Mo in the soil. It was also determined that there are significant positive significant relationships between Cd and Co; Co with Ni, Pb, Fe and Pb and Cu, Fe and Cu and Fe. No heavy metal pollution was found when the heavy metal contents of the regional soils were compared with the limit values.

Metallic pollution in clogging materials of urban porous pavements

1995 ◽  
Vol 32 (1) ◽  
pp. 57-62 ◽  
Author(s):  
Valérie Colandini ◽  
Michel Legret ◽  
Yves Brosseaud ◽  
Jean-Daniel Baladès
Keyword(s):  
Heavy Metal ◽  
Particle Size ◽  
Road Traffic ◽  
Total Concentration ◽  
Extraction Procedure ◽  
Interaction Strength ◽  
Metal Mobility ◽  
Residual Fraction ◽  
Metal Contents ◽  
Copper Zinc

Porous pavements infiltrated with stormwater are faced with clogging problems: runoff particles seep and clog the pervious surface layer of these structures. Clogging material samples (in the form of sludge) have been collected in cleaning operations on the pervious asphalt. This study aims at characterizing these materials, particle size distribution, heavy metal contents by particle size, and studying interactions between metals and particles. A sequential extraction procedure proposed by the experts of the Community Bureau of Reference (B.C.R.) was applied to provide information about heavy metal distribution on particles and to evaluate interaction strength, and consequently potential metal mobility when chemical variations occurred in the environment. Mainly made up of sand, the materials are polluted with lead, copper, zinc and cadmium. The concentrations appeared to be linked with road traffic intensity. The heavy metal contents by particle size showed that the finer are the particles, the higher are the heavy metal concentrations. Heavy metals were found potentially labile; metals contents in the residual fraction (mineral fraction) represented less than 20 % of the total concentration. Cadmium and zinc were apparently more labile than lead and copper.

scholarly journals Heavy-Metal Contents and the Impact of Roasting on Polyphenols, Caffeine, and Acrylamide in Specialty Coffee Beans

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1310
Author(s):  
Matúš Várady ◽  
Sylwester Ślusarczyk ◽  
Jana Boržíkova ◽  
Katarína Hanková ◽  
Michaela Vieriková ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Dry Matter ◽  
Green Beans ◽  
Caffeoylquinic Acids ◽  
Coffee Beans ◽  
Metal Contents ◽  
Specialty Coffee ◽  
Quantitative Analyses ◽  
The Impact

The aim of this study was to determine the effect of roasting on the contents of polyphenols (PPH), acrylamide (AA), and caffeine (CAF) and to analyze heavy metals in specialty coffee beans from Colombia (COL) and Nicaragua (NIC). Samples of NIC were naturally processed and COL was fermented anaerobically. Green beans from COL (COL-GR) and NIC (NIC-GR) were roasted at two levels, light roasting (COL-LIGHT and NIC-LIGHT) and darker roasting (COL-DARK and NIC-DARK), at final temperatures of 210 °C (10 min) and 215 °C (12 min), respectively. Quantitative analyses of PPH identified caffeoylquinic acids (CQA), feruloylquinic acids, and dicaffeoylquinic acids. Isomer 5-CQA was present at the highest levels and reached 60.8 and 57.7% in COL-GR and NIC-GR, 23.4 and 29.3% in COL-LIGHT and NIC-LIGHT, and 18 and 24.2% in COL-DARK and NIC-DARK, respectively, of the total PPH. The total PPH contents were highest in COL-GR (59.76 mg/g dry matter, DM). Roasting affected the contents of PPH, CAF, and AA (p < 0.001, p < 0.011 and p < 0.001, respectively). Nickel and cadmium contents were significantly higher in the COL-GR than in the NIC-GR beans. Darker roasting decreased AA content, but light roasting maintained similar amounts of CAF and total PPH.

Assessing Soil and Plant Pollution by Abandoned Rural Waste Dumping Sites in Ningbo, China

2011 ◽  
Vol 138-139 ◽  
pp. 1149-1155 ◽  
Author(s):  
Yi Dong Guan ◽  
Ye Hong Du ◽  
Zhen Dong Li ◽  
An Cheng Luo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Reference Value ◽  
Dry Weight ◽  
Rice Grain ◽  
Contamination Assessment ◽  
Plant Parts ◽  
Metal Contents ◽  
Plant Pollution

This paper reports the concentration of heavy metals (Cr, Cu, Zn, Cd and Pb) in the soils and rices surrounding the abandoned rural waste dumping sites in Ningbo. Igeo (geoaccumulation index) was calculated to assess the contamination degree of heavy metals in soils. The mean contents of Cr, Cu, Cd, Zn and Pb of soils were 33.3, 24.1, 1.5, 118.9 and 45.6 mg/(kg DW) (dry weight), respectively. All of them were much higher than that of the reference value (i.e. CK), but there were no coherent trend of the metal contents within 1-120m distance from the dumping site. Igeo of heavy metals reveals the order of Cd>Cu>Cr>Pb>Zn, and the contamination assessment of soils using Igeo indicate the moderate Cd pollution, while the soils were unpolluted-moderately overall by Cr, Cu, Zn as well as Pb. The heavy metal contents in root, stem & leaf and rice grains were all remarkable higher than that of the CK at 20-120 m distances, and the heavy metal contents in root were evidently much higher than other plant parts, while those in rice grain were lowest, indicating the great bioaccumulation trend of heavy metals. Although the metal contents in the rice grain were within the legislation limit, its bioaccumulation trend of heavy metals was remarkable, whose contents were 4.38-fold for Cr, 1.76-fold for Cu, 1.28-fold for Zn, 2.67-fold for Cd and 3.03-fold for Pb higher than that of reference value, respectively. Finally, we proposed a decentralized in-situ restoration approach for the dumping sites.

scholarly journals Appropriate Discounting for Benefit-Cost Analysis

2011 ◽  
Vol 2 (2) ◽  
pp. 1-20 ◽  
Author(s):  
David F. Burgess ◽  
Richard O. Zerbe
Keyword(s):  
Cost Analysis ◽  
Discount Rate ◽  
Cost Of Capital ◽  
Hyperbolic Discounting ◽  
Ease Of Use ◽  
Benefit Cost Analysis ◽  
The Social ◽  
Net Benefits ◽  
Benefit Cost

In order to be sensible about what discount rate to use one must be clear about its purpose. We suggest that its purpose is to help select those projects that will contribute more net benefits than some other discount rate. This approach, which is after all the foundation for benefit-cost analysis, helps to reconcile different suggested procedures for determining the discount rate. We suggest that the social opportunity cost of capital (SOC) is superior to other suggested approaches in its generality and its ease of use. We use the SOC to determine a range of real rates that vary between 6% and 8%. We suggest that approaches based on determination of preferences, which result in hyperbolic discounting, are less appropriate and less useful.

scholarly journals Cost-effective Method of Analysis for the Determination of Cadmium, Copper, Nickel and Zinc in Cocoa Beans and Chocolates

2014 ◽  
Vol 4 (1) ◽  
pp. 193 ◽  
Author(s):  
Gideon Ramtahal ◽  
Ivan Chang Yen ◽  
Isaac Bekele ◽  
Frances Bekele ◽  
Lawrence Wilson ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Reference Materials ◽  
Certified Reference Materials ◽  
Control Sample ◽  
Cost Effective ◽  
Cocoa Beans ◽  
Copper Nickel ◽  
Flame Atomic Absorption

<p>The determination of heavy metals in cocoa beans and chocolates is of great importance, due to increasingly stringent regulations being implemented by international legislative bodies and chocolate manufacturers, to protect the health of their consumers. While various techniques exist for heavy metal analyses in cocoa, this study developed a cost-effective, accurate and precise method capable of processing up to 120 samples per batch for the determination of cadmium, copper, nickel and zinc. For sample extractions, a normal laboratory hot plate and locally fabricated high-capacity digestion blocks were used, instead of dedicated block digestion or microwave digestion systems. In addition, only concentrated nitric acid was used, instead of mixed reagents used in standardized methods, for metal extractions from samples, with a sample: extractant ratio of 0.5 g : 10 mL, digestion at 130 ºC, followed by filtration and analysis by flame atomic absorption spectrophotometry. The method was validated with Certified Reference Materials, with heavy metal recoveries generally &gt;95%. Additionally, an in-house quality control sample of ground cocoa nib analyzed together with the Certified Reference Materials was used to monitor the consistency of analyses of heavy metals in cocoa bean samples.</p>

scholarly journals Spatial Connections between Microplastics and Heavy Metal Pollution within Floodplain Soils

2022 ◽  
Vol 12 (2) ◽  
pp. 595
Author(s):  
Collin J. Weber ◽  
Jens Hahn ◽  
Christian Opp
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Wide Distribution ◽  
Soil Material ◽  
Statistical Correlations ◽  
Floodplain Soils ◽  
Icp Ms ◽  
Metal Contents ◽  
Sediment Layers ◽  
Deposition Conditions

Soils contain an increasing number of different pollutants, which are often released into the environment by human activity. Among the “new” potential pollutants are plastics and microplastics. “Recognized” pollutants such as heavy metals, of geogenic and anthropogenic origin, now meet purely anthropogenic contaminants such as plastic particles. Those can meet especially in floodplain landscapes and floodplain soils, because of their function as a temporary sink for sediments, nutrients, and pollutants. Based on a geospatial sampling approach, we analyzed the soil properties and heavy metal contents (ICP-MS) in soil material and macroplastic particles, and calculated total plastic concentrations (Ptot) from preliminary studies. Those data were used to investigate spatial connections between both groups of pollutants. Our results from the example of the Lahn river catchment show a low-to-moderate contamination of the floodplain soils with heavy metals and a wide distribution of plastic contents up to a depth of two meters. Furthermore, we were able to document heavy metal contents in macroplastic particles. Spatial and statistical correlations between both pollutants were found. Those correlations are mainly expressed by a comparable variability in concentrations across the catchment and in a common accumulation in topsoil and upper soil or sediment layers (0–50 cm). The results indicate comparable deposition conditions of both pollutants in the floodplain system.

scholarly journals Erkenez Çayı’nda (Kahramanmaraş) Süt Ürünleri, Boya ve Tekstil Fabrikası Atık Sularından Kaynaklanan Ağır Metal Kirliliğinin Belirlenmesi

2019 ◽  
Vol 7 (11) ◽  
pp. 1858
Author(s):  
Özgür Canpolat ◽  
Ece Vanlı
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Pollution ◽  
Heavy Metal Pollution ◽  
Quality Criteria ◽  
Water Quality Criteria ◽  
Milk Products ◽  
Metal Contents ◽  
Considerable Impact ◽  
Textile Factory

Industries, as a source of pollution, have a considerable impact on aquatic ecosystems due to the diversity in the composition of their wastewater. In this study, it is aimed to determine the heavy metal pollution caused by the wastewater of milk products factory, paint factory and textile factory in the Organized Industrial Zone of Kahramanmaraş province. For this purpose, seasonal concentrations of some heavy metals (Fe, Cu, Zn, Cr, Ni, Cd, As and Hg) have been determined in wastewaters of milk products factory, paint factory and textile factory and in the region where these wastewaters discharge in the Erkenez Stream. The seasonal variation of heavy metals in all stations, generally the lowest concentrations of all elements were determined in winter and the highest concentrations were determined in summer. When the heavy metal contents of milk products factory, paint factory and textile factory wastewaters were compared, the highest values were found in textile factory wastewater. When all stations are taken into consideration, according to USEPA and water quality criteria, it is determined that the wastewaters of milk products factory, paint factory and textile factory and the area of the Erkenez Stream, where these wastewaters are discharged, were very dirty in term of heavy metals. When these results are taken into consideration, it is clear that the wastewater of these factories causes serious heavy metal pollution in the Erkenez Stream.

Sign in / Sign up

Export Citation Format

Share Document