scholarly journals Combining Ability and Gene Action for Yield Improvement in Kenaf (Hibiscus Cannabinus L.) Under Tropical Conditions Through Diallel Mating Design

2021 ◽  
Author(s):  
Md Al-Mamun ◽  
RAFII Y. MOHD. ◽  
MISRAN AZIZAH ◽  
BERAHIM ZULKARAMI ◽  
AHMAD ZAITON ◽  
...  
Keyword(s):  
Plant Height ◽  
Combining Ability ◽  
Gene Action ◽  
Gene Effects ◽  
Mating Design ◽  
Diallel Mating Design ◽  
Tropical Conditions ◽  
Additive Gene ◽  
Fibre Yield ◽  
Diallel Mating

Abstract Nine morphologically distinct kenaf genotypes were hybridized to produce 36 hybrids following a half diallel mating design. The combining ability and gene action of 15 yield and yield components were assessed in hybrids and their parents across two environments. Except for the mid diameter and plant height traits, there were highly significant differences (p ≤ 0.01) between both the analysis of variance of environments and the interaction of genotype and environment. For the inheritance of these traits, additive gene effects were considerable, and the expression of these additive genes was heavily influenced by the environment. Significant differences were found for all studied traits for GCA except top diameter, and SCA except plant height and top diameter, implying the presence of both additive and non-additive gene action for the inheritance of the concerned characters. For all features except top diameter and number of nodes, the magnitude of GCA variation was significantly higher than that of SCA variance, indicating the additive gene's predominance. The parental lines P1, P3 and P4 were determined to be outstanding general combiners for fibre yield and yield-related parameters. Considering combining ability and genetic analysis study together, the crosses P1 × P4, P1 × P9, P2 × P3, P2 × P5, P4 × P6, P4 × P7, P4 × P9, P5 × P8, and P7 × P9 were found promising for their heterotic response to higher fibre yield, stick yield, seed yield and and could be useful by adopting proper strategies for future improvement in kenaf breeding programmes.

scholarly journals Evaluating Genetic Parameters and Combining Ability of Starch Viscosity Parameters in Rice Cultivars (Oryza sativa L.)

2019 ◽  
Vol 7 (4) ◽  
pp. 665
Author(s):  
Alireza Haghighi Hasanalideh ◽  
Mehrzad Allahgholipour ◽  
Ezatollah Farshadfar
Keyword(s):  
Combining Ability ◽  
Gene Action ◽  
Oryza Sativa L ◽  
Block Design ◽  
Breeding Methods ◽  
Narrow Sense ◽  
Narrow Sense Heritability ◽  
Gene Effects ◽  
Diallel Mating Design ◽  
Additive Gene

This study was undertaken to assess the combining ability of 6 rice varieties, for viscosity parameters and determining gene action controlling Rapid Visco Analyser (RVA) characters. F2 progenies derived from a 6×6 half diallel mating design with their parents were grown in a randomized complete block design with three replications at the research farm of Rice Research Institute of Iran (RRII) in 2015. The diallel analysis by Griffing`s method indicated the involvement of additive and non-additive gene actions controlling RVA traits. For traits PV and FV RI18447-2 and IR50 were the best combiners for increasing and decreasing, respectively. Deylamani and IR50 were the best combiners for increasing and decreasing BV, respectively. Beside, due to more portion of non-additive gene action in controlling trait SV, The Gilaneh × RI18430-46, and Deylamani × RI18430-46 crosses were the best for increasing and decreasing SV, respectively. The high estimates of broad sense heritability and narrow sense heritability for BV and FV, indicated the importance of additive effects in expression of these traits. Therefore, selection base breeding methods will be useful to improve these traits and selection in the early generations could be done to fix the favourable genes. Low estimate of narrow sense heritability for SV revealed that non-additive gene effects play important role in controlling setback viscosity. So, hybrid base breeding methods will be useful to improve this trait.

Combining ability and heterosis studyin maize inbreds throughout diallel mating design

2018 ◽  
Vol 43 (4) ◽  
pp. 599-609
Author(s):  
ANMS Karim ◽  
S Ahmed ◽  
AH Akhi ◽  
MZA Talukder ◽  
A Karim
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Combining Ability ◽  
Gene Action ◽  
General Combining Ability ◽  
Specific Combining Ability ◽  
Gene Effects ◽  
Additive Type ◽  
Additive Gene ◽  
Ear Height

Combining ability effects were estimated for grain yield and some other important agronomic traits of maize in a 7×7 diallel analysis excluding reciprocals. The variances for general combining ability (GCA) were found significant for yield, days to pollen shedding, days to silking and ear height while it was found non-significant for plant height and number of kernels/ear. Non-significant general combining ability (GCA) variance for plant height and number of kernels/ear indicates that these two traits were predominantly controlled by non- additive type of gene action. Specific combining ability (SCA) was significant for all the characters except yield and days to silking. Non-significant specific combining ability (SCA) variance for yield and days to silking suggests that these two traits were predominantly controlled by additive type of gene action. Both GCA and SCA variances were found significant only in days to pollen shedding and ear height indicated the presence of additive as well as non additive gene effects for controlling the traits. However, relative magnitude of these variances indicated that additive gene effects were more prominent for all the characters studied except days to silking. Parent BIL95 was the best general combiner for both high yield and number of kernels/ear and parent BML4 for dwarf plant type. Two crosses (BML4× BML36 and BIL114× BIL31) exhibited significant and positive SCA effects for grain yield involved low × average and average × average general combining parents. The range of heterosis expressed by different crosses for grain yield and days to silking was from -65.83 to 21.26 percent and -17.85 to 8.22 percent, respectively.. The better performing three crosses (BIL114×BIL31, BIL138×BIL95 and BIL31×BIL95) can be utilized for developing high yielding hybrid varieties as well as for exploiting hybrid vigour.Bangladesh J. Agril. Res. 43(4): 599-609, December 2018

scholarly journals Combining ability and gene action in sesame (Sesamum indicum L) elite genotypes by diallel mating design

2016 ◽  
Vol 8 (11) ◽  
pp. 250-256
Author(s):  
Okello Anyanga Walter ◽  
Rubaihayo Patrick ◽  
Gibson Paul ◽  
Okori Patrick
Keyword(s):  
Combining Ability ◽  
Gene Action ◽  
Sesamum Indicum ◽  
Mating Design ◽  
Diallel Mating Design ◽  
Diallel Mating

scholarly journals Combining Ability and Heterosis of Selected Grain and Forage Dual Purpose Sorghum Genotypes

2017 ◽  
Vol 9 (2) ◽  
pp. 122 ◽  
Author(s):  
Sally Chikuta ◽  
Thomas Odong ◽  
Fred Kabi ◽  
Patrick Rubaihayo
Keyword(s):  
Grain Yield ◽  
Leaf Area ◽  
Plant Height ◽  
Combining Ability ◽  
Gene Action ◽  
Small Scale ◽  
Dual Purpose ◽  
Forage Sorghum ◽  
Diallel Mating Design ◽  
Sorghum Genotypes

Sorghum is an important food and feed source in mixed crop-livestock production systems where its dual usage is a preferred option, especially among the resource poor small-scale farmers. Attempts to improve fodder quality traits in maize have been at the expense of grain traits and vice versa, but other studies demonstrated that it was possible to select for high stem biomass without compromising the improvement of grain yields in sorghum. As a follow up to this effort, this study was undertaken to estimate the combining ability of grain and forage sorghum genotypes and determine heterosis for several traits as a criteria for improving dual purpose sorghum cultivars. Four grain and four forage sorghum cultivars were crossed to generate 23 crosses following the half diallel mating design scheme at Makerere University Agricultural Research institute Kabanyolo (MUARIK) in 2013. The crosses were evaluated at three locations in Uganda during two rainy seasons of 2014. Data were taken and analysed on leaf area, leaf-stem ratio, plant height, seed weight, grain yield, and biomass. Results indicated that the gene action for the traits under observation was controlled by both additive and non additive genetic effects. Majority of the parental lines had significant GCA estimates for all traits except line 20 for grain yield, lines 22 and 34 for plant height, line 35 for leaf-stem ratio, and line 22 for days to flowering. Significant (P ≤ 0.05) SCA estimates were prominent in most of the individual parental combinations for all traits except leaf area and leaf-stem ratio indicating the role of dominance gene action. Bakers ratio and heritability coefficients were > 52% for biomass, flowering duration and plant height indicating that genetic gains can be achieved by conventional breeding for the three traits. Heterosis in grain yield and biomass over both the mid and better parents was shown by more than half of the crosses studied. This study suggested that both inter and intra allelic interactions were involved in the expression of the traits.

scholarly journals Combining Ability Analysis of Blast Disease Resistance and Agronomic Traits in Finger Millet [Eleusine coracana (L.) Gaertn]

2016 ◽  
Vol 8 (11) ◽  
pp. 138 ◽  
Author(s):  
Lawrence Owere ◽  
Pangirayi Tongoona ◽  
John Derera ◽  
Nelson Wanyera
Keyword(s):  
Disease Resistance ◽  
Combining Ability ◽  
Finger Millet ◽  
Gene Action ◽  
Agronomic Traits ◽  
The Other ◽  
Blast Disease ◽  
Additive Gene Action ◽  
Gene Effects ◽  
Additive Gene

<p>Blast disease is the most important biotic constraint to finger millet production. Therefore disease resistant varieties are required. However, there is limited information on combining ability for resistance and indeed other agronomic traits of the germplasm in Uganda. This study was carried out to estimate the combining ability and gene effects controlling blast disease resistance and selected agronomic traits in finger millet. Thirty six crosses were generated from a 9 × 9 half diallel mating design. The seed from the 36 F<sub>1</sub> crosses were advanced by selfing and the F<sub>2</sub> families and their parents were evaluated in three replications. General combining ability (GCA) for head blast resistance and the other agronomic traits were all highly significant (p ≤ 0.01), whereas specific combining ability (SCA) was highly significant for all traits except grain yield and grain mass head<sup>-1</sup>. On partitioning the mean sum of squares, the GCA values ranged from 31.65% to 53.05% for head blast incidence and severity respectively, and 36.18% to 77.22% for the other agronomic traits measured. Additive gene effects were found to be predominant for head blast severity, days to 50% flowering, grain yield, number of productive tillers plant<sup>-1</sup>, grain mass head<sup>-1</sup>, plant height and panicle length. Non-additive gene action was predominant for number of fingers head<sup>-1</sup>, finger width and panicle width. The parents which contributed towards high yield were <em>Seremi 2</em>, <em>Achaki</em>, <em>Otunduru</em>, <em>Bulo</em> and <em>Amumwari</em>. Generally, highly significant additive gene action implied that progress would be made through selection whereas non-additive gene action could slow selection progress and indicated selection in the later generations.</p>

Combining ability and gene action studies for yield-contributing traits in crosses involving winter and spring wheat genotypes

2009 ◽  
Vol 57 (4) ◽  
pp. 417-423 ◽  
Author(s):  
S. Sharma ◽  
H. Chaudhary
Keyword(s):  
Winter Wheat ◽  
Spring Wheat ◽  
Combining Ability ◽  
Gene Action ◽  
Block Design ◽  
Additive Gene Action ◽  
Wheat Genotypes ◽  
Diallel Mating Design ◽  
Additive Gene ◽  
Wheat Hybrids

The success of winter × spring wheat hybridization programmes depends upon the ability of the genotypes of these two physiologically distinct ecotypes to combine well with each other. Hence the present investigation was undertaken to study the combining ability and nature of gene action for various morpho-physiological and yield-contributing traits in crosses involving winter and spring wheat genotypes. Five elite and diverse genotypes each of winter and spring wheat ecotypes and their F 1 (spring × spring, winter × winter and winter × spring) hybrids, generated in a diallel mating design excluding reciprocals, were evaluated in a random block design with three replications. Considerable variability was observed among the spring and winter wheat genotypes for all the traits under study. Furthermore, these traits were highly influenced by the winter and spring wheat genetic backgrounds, resulting in significant differences between the spring × spring, winter × winter and winter × spring wheat hybrids for some of the traits. The winter × spring wheat hybrids were observed to be the best with respect to yieldcontributing traits. On the basis of GCA effects, the spring wheat parents HPW 42, HPW 89, HW 3024, PW 552 and UP 2418 and the winter wheat parents Saptdhara, VWFW 452, W 10 and WW 24 were found to be good combiners for the majority of traits. These spring and winter wheat parents could be effectively utilized in future hybridization programmes for wheat improvement. Superior hybrid combinations for one or more traits were identified, all of which involved at least one good general combiner for one or more traits in their parentage, and can thus be exploited in successive generations to develop potential recombinants through various breeding strategies. Genetic studies revealed the preponderance of additive gene action for days to flowering, days to maturity and harvest index, and non-additive gene action for the remaining six traits.

scholarly journals combining ability for yield and yield contributing characters of white jute (Corchorus capsularis L.)

1970 ◽  
Vol 39 (1) ◽  
pp. 79-85
Author(s):  
Rahima Khatun ◽  
RH Sarker ◽  
MA Sobhan
Keyword(s):  
Key Words ◽  
Plant Height ◽  
Combining Ability ◽  
Reciprocal Cross ◽  
General Combining Ability ◽  
Predominant Role ◽  
Base Diameter ◽  
Corchorus Capsularis ◽  
Additive Gene ◽  
Fibre Yield

Crosses were made between three varieties and seven accessions of white jute (Corchorus capsularis L.) in all possible combinations to establish 10 × 10 full diallel set. Variances for general combining ability (GCA) and specific combining ability (SCA) were significant or highly significant for all the characters indicating additive and non-additive gene actions played predominant role for expression of these characters. The magnitudes of GCA variance were higher than the corresponding SCA variance confirmed the predominance of additive genetic variations for these traits. The variety CVL-1 and Acc. 1831 were good general combiners for plant height, technical height, base diameter, number of nodes, bark weight, fibre weight and stick weight. Crosses, var. CVL-1 × Acc. 1831, Accs. 3695 × 4087, Accs. 1831 × 1833, Accs.1831 × var.CC-45, Acc. 2146 × var. A-38 and Acc. 2146 × var.CC-45 revealed significant positive SCA effect for fibre weight. Significant reciprocal SCA effect was observed in crosses, Accs.1832 × 3695, Accs.1833 × 1831 and Acc. 4087 × var.CVL-1. Crosses, var. CVL-1 × Acc.1831, Accs. 3695 × 4087, Acc.1831 × var.CC-45, Acc.2146 × var.CC-45 and a reciprocal cross, Accs.1833 × 1831 were found to be good specific combiners for bark weight, fibre weight and stick weight. Key words: Combining ability; Fibre yield; White jute DOI: 10.3329/bjb.v39i1.5530Bangladesh J. Bot. 39(1): 79-85, 2010 (June)

Sign in / Sign up

Export Citation Format

Share Document