scholarly journals 2E (Energy and Exergy) Analysis of ET-CPC Solar Collector Integrated with Different Configuration of Thermal Storage System

2022 ◽  
Author(s):  
Sathiya Satchi Christopher ◽  
Vellaisamy Kumaresan
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solar Collector ◽  
Phase Change Materials ◽  
Storage System ◽  
Superior Performance ◽  
Solar Thermal Energy ◽  
Water Heating ◽  
Efficient Operation

Abstract The intermittency of solar thermal energy warrants the integration/utilization of thermal energy storage system for efficient operation. Effective utilization of solar water heating (SWH) system can reduce nearly 70 - 90 % of the energy cost incurred for water heating applications. In this study, a compound parabolic concentrator (CPC) solar collector is paired with thermal energy storage (TES) system for the improvement of thermal performance of the collector through enhanced heat transfer rate and minimizing the heat losses. Effects of varying mass flow rate and different arrangement of phase change materials (PCMs) on the performance of the CPC solar collector are investigated. A study of the influence of PCMs configurations in TES systems viz three PCMs (Case 1) and five PCMs (Case 2) on the energy efficiency, exergy efficiency and overall loss coefficient of the solar collector and TES system is made and compared with sensible TES system. The results show the attainment of maximum thermal efficiency of 70 % for ‘Case 2’. Comparison with ‘Case 1’, ‘Case 2’ exhibited a reduction heat loss of 4 % from the TES system. Results of exergy study reveal a superior performance in Case 2 over other configurations.

scholarly journals Exploring the potential of a hybrid device combining solar water heating and molecular solar thermal energy storage

2017 ◽  
Vol 10 (3) ◽  
pp. 728-734 ◽  
Author(s):  
Ambra Dreos ◽  
Karl Börjesson ◽  
Zhihang Wang ◽  
Anna Roffey ◽  
Zack Norwood ◽  
...  
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage System ◽  
Energy System ◽  
Solar Thermal ◽  
Solar Thermal Energy ◽  
Water Heating ◽  
Solar Water Heating ◽  
Solar Water

A hybrid solar energy system consisting of a molecular solar thermal energy storage system (MOST) combined with a solar water heating system (SWH) is presented.

Pyrazolium Phase Change Materials for Solar-Thermal and Wind Energy Storage

2019 ◽  
Author(s):  
Karolina Matuszek ◽  
R. Vijayaraghavan ◽  
Craig Forsyth ◽  
Surianarayanan Mahadevan ◽  
Mega Kar ◽  
...  
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
High Efficiency ◽  
Scale Up ◽  
Solar Thermal ◽  
Energy Storage Materials ◽  
Solar Thermal Energy ◽  
Storage Materials

Renewable energy has the ultimate capacity to resolve the environmental and scarcity challenges of the world’s energy supplies. However, both the utility of these sources and the economics of their implementation are strongly limited by their intermittent nature; inexpensive means of energy storage therefore needs to be part of the design. Distributed thermal energy storage is surprisingly underdeveloped in this context, in part due to the lack of advanced storage materials. Here, we describe a novel family of thermal energy storage materials based on pyrazolium cation, that operate in the 100-220°C temperature range, offering safe, inexpensive capacity, opening new pathways for high efficiency collection and storage of both solar-thermal energy, as well as excess wind power. We probe the molecular origins of the high thermal energy storage capacity of these ionic materials and demonstrate extended cycling that provides a basis for further scale up and development.

Performance of Latent Heat Solar Thermal Energy Storage System Using Various Heat Transfer Fluids

2015 ◽  
Vol 787 ◽  
pp. 27-31
Author(s):  
M. Gajendiran ◽  
P.M. Sivaram ◽  
N. Nallusamy
Keyword(s):  
Energy Storage ◽  
Ethylene Glycol ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage System ◽  
Energy Storage System ◽  
Solar Thermal Energy ◽  
Heat Transfer Fluids ◽  
Charging Time ◽  
Thermal Energy Storage System

In the present work the thermal performance of Phase Change Material (PCM) based solar thermal energy storage system under the influence of different heat transfer fluids (HTF) have been investigated. Water, Ethylene Glycol–water and Copper nanofluid are selected as HTF. Paraffin is used as PCM and encapsulated in cylindrical capsules. The thermal energy storage (TES) tank acts as a storage unit consisting PCM capsules packed in three beds surrounded by water, which acts as sensible heat storage (SHS) material. HTF circulated by a pump transfers heat from solar flat plate collector (FPC) to the TES tank. 25% ethylene glycol -75% water HTF is prepared by mixing ethylene glycol (EG) with water. Copper-distilled water nanofluids (0.3% by weight) are prepared using prolonged sonication with sodium dodecyl benzene sulphonate (SDBS) as the surfactant. Various performance parameters such as charging time, instantaneous heat stored, cumulative heat stored and system efficiency are studied for various HTFs. It is found that the charging time is reduced by 33.3% for copper nanofluid and 22.2% for ethylene glycol- water mixture HTFs. It is also observed that there is an increase in system efficiency and cumulative heat stored with reference to charging time for these HTFs when compared with conventional HTF 1 i.e. water.

A review of nanomaterial incorporated phase change materials for solar thermal energy storage

Solar Energy ◽  
2021 ◽  
Author(s):  
Mohammad Alhuyi Nazari ◽  
Akbar Maleki ◽  
Mamdouh El Haj Assad ◽  
Marc A. Rosen ◽  
Arman Haghighi ◽  
...  
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Solar Thermal ◽  
Solar Thermal Energy
Sign in / Sign up

Export Citation Format

Share Document