scholarly journals A multi-part strategy for introgression of exotic germplasm into elite plant breeding programs using genomic selection

2022 ◽  
Author(s):  
Irene S. Breider ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Steve Thorn ◽  
Manish K. Pandey ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Plant Breeding ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Genetic Improvement ◽  
Breeding Strategy ◽  
Breeding Program ◽  
Breeding Programs ◽  
Polygenic Inheritance ◽  
Polygenic Traits

Abstract Some of the most economically important traits in plant breeding show highly polygenic inheritance. Genetic variation is a key determinant of the rates of genetic improvement in selective breeding programs. Rapid progress in genetic improvement comes at the cost of a rapid loss of genetic variation. Germplasm available through expired Plant Variety Protection (exPVP) lines is a potential resource of variation previously lost in elite breeding programs. Introgression for polygenic traits is challenging, as many genes have a small effect on the trait of interest. Here we propose a way to overcome these challenges with a multi-part pre-breeding program that has feedback pathways to optimise recurrent genomic selection. The multi-part breeding program consists of three components, namely a bridging component, population improvement, and product development. Parameters influencing the multi-part program were optimised with the use of a grid search. Haploblock effect and origin were investigated. Results showed that the introgression of exPVP germplasm using an optimised multi-part breeding strategy resulted in 1.53 times higher genetic gain compared to a two-part breeding program. Higher gain was achieved through reducing the performance gap between exPVP and elite germplasm and breaking down linkage drag. Both first and subsequent introgression events showed to be successful. In conclusion, the multi-part breeding strategy has a potential to improve long-term genetic gain for polygenic traits and therefore, potential to contribute to global food security.

scholarly journals A hybrid optimal contribution approach to drive short-term gains while maintaining long-term sustainability in a modern plant breeding program

2020 ◽  
Author(s):  
Nicholas Santantonio ◽  
Kelly Robbins
Keyword(s):  
Plant Breeding ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Genetic Variance ◽  
Hybrid Approach ◽  
Breeding Program ◽  
Short Term ◽  
Breeding Programs ◽  
Plant Breeding Program

1AbstractPlant breeding programs must adapt genomic selection to an already complex system. Inbred or hybrid plant breeding programs must make crosses, produce inbred individuals, and phenotype inbred lines or their hybrid test-crosses to select and validate superior material for product release. These products are few, and while it is clear that population improvement is necessary for continued genetic gain, it may not be sufficient to generate superior products. Rapid-cycle recurrent truncation genomic selection has been proposed to increase genetic gain by reducing generation time. This strategy has been shown to increase short-term gains, but can quickly lead to loss of genetic variance through inbreeding as relationships drive prediction. The optimal contribution of each individual can be determined to maximize gain in the following generation while limiting inbreeding. While optimal contribution strategies can maintain genetic variance in later generations, they suffer from a lack of short-term gains in doing so. We present a hybrid approach that branches out yearly to push the genetic value of potential varietal materials while maintaining genetic variance in the recurrent population, such that a breeding program can achieve short-term success without exhausting long-term potential. Because branching increases the genetic distance between the phenotyping pipeline and the recurrent population, this method requires sacrificing some trial plots to phenotype materials directly out of the recurrent population. We envision the phenotypic pipeline not only for selection and validation, but as an information generator to build predictive models and develop new products.

scholarly journals Genomic Selection for Any Dairy Breeding Program via Optimized Investment in Phenotyping and Genotyping

2021 ◽  
Vol 12 ◽  
Author(s):  
Jana Obšteter ◽  
Janez Jenko ◽  
Gregor Gorjanc
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Breeding Program ◽  
Progeny Testing ◽  
Initial Training ◽  
Training Population ◽  
Breeding Programs ◽  
Use Of Resources ◽  
Dairy Cattle Breeding ◽  
Close Relatives

This paper evaluates the potential of maximizing genetic gain in dairy cattle breeding by optimizing investment into phenotyping and genotyping. Conventional breeding focuses on phenotyping selection candidates or their close relatives to maximize selection accuracy for breeders and quality assurance for producers. Genomic selection decoupled phenotyping and selection and through this increased genetic gain per year compared to the conventional selection. Although genomic selection is established in well-resourced breeding programs, small populations and developing countries still struggle with the implementation. The main issues include the lack of training animals and lack of financial resources. To address this, we simulated a case-study of a small dairy population with a number of scenarios with equal available resources yet varied use of resources for phenotyping and genotyping. The conventional progeny testing scenario collected 11 phenotypic records per lactation. In genomic selection scenarios, we reduced phenotyping to between 10 and 1 phenotypic records per lactation and invested the saved resources into genotyping. We tested these scenarios at different relative prices of phenotyping to genotyping and with or without an initial training population for genomic selection. Reallocating a part of phenotyping resources for repeated milk records to genotyping increased genetic gain compared to the conventional selection scenario regardless of the amount and relative cost of phenotyping, and the availability of an initial training population. Genetic gain increased by increasing genotyping, despite reduced phenotyping. High-genotyping scenarios even saved resources. Genomic selection scenarios expectedly increased accuracy for young non-phenotyped candidate males and females, but also proven females. This study shows that breeding programs should optimize investment into phenotyping and genotyping to maximize return on investment. Our results suggest that any dairy breeding program using conventional progeny testing with repeated milk records can implement genomic selection without increasing the level of investment.

scholarly journals Modeling Illustrates That Genomic Selection Provides New Opportunities for Intercrop Breeding

2021 ◽  
Vol 12 ◽  
Author(s):  
Jon Bančič ◽  
Christian R. Werner ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Damaris A. Odeny ◽  
...  
Keyword(s):  
Grain Yield ◽  
Genetic Correlation ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Phenotypic Selection ◽  
Breeding Program ◽  
Weed Suppression ◽  
Selection Strategy ◽  
Agricultural Practice ◽  
Breeding Programs

Intercrop breeding programs using genomic selection can produce faster genetic gain than intercrop breeding programs using phenotypic selection. Intercropping is an agricultural practice in which two or more component crops are grown together. It can lead to enhanced soil structure and fertility, improved weed suppression, and better control of pests and diseases. Especially in subsistence agriculture, intercropping has great potential to optimize farming and increase profitability. However, breeding for intercrop varieties is complex as it requires simultaneous improvement of two or more component crops that combine well in the field. We hypothesize that genomic selection can significantly simplify and accelerate the process of breeding crops for intercropping. Therefore, we used stochastic simulation to compare four different intercrop breeding programs implementing genomic selection and an intercrop breeding program entirely based on phenotypic selection. We assumed three different levels of genetic correlation between monocrop grain yield and intercrop grain yield to investigate how the different breeding strategies are impacted by this factor. We found that all four simulated breeding programs using genomic selection produced significantly more intercrop genetic gain than the phenotypic selection program regardless of the genetic correlation with monocrop yield. We suggest a genomic selection strategy which combines monocrop and intercrop trait information to predict general intercropping ability to increase selection accuracy in the early stages of a breeding program and to minimize the generation interval.

scholarly journals Genomic selection for any dairy breeding program via optimized investment in phenotyping and genotyping

2020 ◽  
Author(s):  
Jana Obšteter ◽  
Janez Jenko ◽  
Gregor Gorjanc
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Breeding Program ◽  
Progeny Testing ◽  
Initial Training ◽  
Training Population ◽  
Breeding Programs ◽  
Female Candidates ◽  
Use Of Resources ◽  
Close Relatives

AbstractThis paper evaluates the potential of maximizing genetic gain in dairy cattle breeding by optimizing investment into phenotyping and genotyping. Conventional breeding focuses on phenotyping selection candidates or their close relatives to maximize selection accuracy for breeders and quality assurance for producers. Genomic selection decoupled phenotyping and selection and through this increased genetic gain per year compared to the conventional selection. Although genomic selection is established in well-resourced breeding programs, small populations and developing countries still struggle with the implementation. The main issues include the lack of training animals and lack of financial resources. To address this, we simulated a case-study of a small dairy population with a number of scenarios with equal resources yet varied use of resources for phenotyping and genotyping. The conventional progeny testing scenario had 11 phenotype records per lactation. In genomic scenarios, we reduced phenotyping to between 10 and 1 phenotype records per lactation and invested the saved resources into genotyping. We tested these scenarios at different relative prices of phenotyping to genotyping and with or without an initial training population for genomic selection. Reallocating a part of phenotyping resources for repeated milk records to genotyping increased genetic gain compared to the conventional scenario regardless of the amount and relative cost of phenotyping, and the availability of an initial training population. Genetic gain increased by increasing genotyping, despite reduced phenotyping. High-genotyping scenarios even saved resources. Genomic scenarios expectedly increased accuracy for young non-phenotyped male and female candidates, but also cows. This study shows that breeding programs should optimize investment into phenotyping and genotyping to maximise return on investment. Our results suggest that any dairy breeding program using conventional progeny testing with repeated milk records can implement genomic selection without increasing the level of investment.

scholarly journals Genomic selection strategies for clonally propagated crops

2020 ◽  
Author(s):  
Christian R. Werner ◽  
R. Chris Gaynor ◽  
Daniel J. Sargent ◽  
Alessandra Lillo ◽  
Gregor Gorjanc ◽  
...  
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Genomic Prediction ◽  
Breeding Program ◽  
Selection Methods ◽  
Breeding Programs ◽  
Breeding Values ◽  
Parent Selection ◽  
Estimated Breeding Values ◽  
Selection Of

AbstractFor genomic selection in clonal breeding programs to be effective, crossing parents should be selected based on genomic predicted cross performance unless dominance is negligible. Genomic prediction of cross performance enables a balanced exploitation of the additive and dominance value simultaneously. Here, we compared different strategies for the implementation of genomic selection in clonal plant breeding programs. We used stochastic simulations to evaluate six combinations of three breeding programs and two parent selection methods. The three breeding programs included i) a breeding program that introduced genomic selection in the first clonal testing stage, and ii) two variations of a two-part breeding program with one and three crossing cycles per year, respectively. The two parent selection methods were i) selection of parents based on genomic estimated breeding values, and ii) selection of parents based on genomic predicted cross performance. Selection of parents based on genomic predicted cross performance produced faster genetic gain than selection of parents based on genomic estimated breeding values because it substantially reduced inbreeding when the dominance degree increased. The two-part breeding programs with one and three crossing cycles per year using genomic prediction of cross performance always produced the most genetic gain unless dominance was negligible. We conclude that i) in clonal breeding programs with genomic selection, parents should be selected based on genomic predicted cross performance, and ii) a two-part breeding program with parent selection based on genomic predicted cross performance to rapidly drive population improvement has great potential to improve breeding clonally propagated crops.

scholarly journals Effects of Different Strategies for Exploiting Genomic Selection in Perennial Ryegrass Breeding Programs

2020 ◽  
Vol 10 (10) ◽  
pp. 3783-3795
Author(s):  
Hadi Esfandyari ◽  
Dario Fè ◽  
Biructawit Bekele Tessema ◽  
Lucas L. Janss ◽  
Just Jensen
Keyword(s):  
Genomic Selection ◽  
Perennial Ryegrass ◽  
Genetic Gain ◽  
Additive Genetic Variance ◽  
Phenotypic Selection ◽  
Breeding Program ◽  
Breeding Programs ◽  
Traditional Program ◽  
Breeding Schemes ◽  
Estimated Breeding Values

Genomic selection (GS) is a potential pathway to accelerate genetic gain for perennial ryegrass (Lolium perenne L.). The main objectives of the present study were to investigate the level of genetic gain and accuracy by applying GS in commercial perennial ryegrass breeding programs. Different scenarios were compared to a conventional breeding program. Simulated scenarios differed in the method of selection and structure of the breeding program. Two scenarios (Phen-Y12 and Phen) for phenotypic selection and three scenarios (GS-Y12, GS and GS-SP) were considered for genomic breeding schemes. All breeding schemes were simulated for 25 cycles. The amount of genetic gain achieved was different across scenarios. Compared to phenotypic scenarios, GS scenarios resulted in substantially larger genetic gain for the simulated traits. This was mainly due to more efficient selection of plots and single plants based on genomic estimated breeding values. Also, GS allows for reduction in waiting time for the availability of the superior genetic materials from previous cycles, which led to at least a doubling or a trebling of genetic gain compared to the traditional program. Reduction in additive genetic variance levels were higher with GS scenarios than with phenotypic selection. The results demonstrated that implementation of GS in ryegrass breeding is possible and presents an opportunity to make very significant improvements in genetic gains.

scholarly journals Modelling selection response in plant breeding programs using crop models as mechanistic gene-to-phenotype (CGM-G2P) multi-trait link functions

2020 ◽  
Author(s):  
M Cooper ◽  
O Powell ◽  
K P Voss-Fels ◽  
C D Messina ◽  
C Gho ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Plant Breeding ◽  
Complex Traits ◽  
Reference Population ◽  
Breeding Strategy ◽  
Breeding Value ◽  
Breeding Programs ◽  
Genetic Changes ◽  
Crop Models ◽  
Link Functions

Abstract Plant breeding programs are designed and operated over multiple cycles to systematically change the genetic makeup of plants to achieve improved trait performance for a Target Population of Environments (TPE). Within each cycle, selection applied to the standing genetic variation within a structured reference population of genotypes (RPG) is the primary mechanism by which breeding programs make the desired genetic changes. Selection operates to change the frequencies of the alleles of the genes controlling trait variation within the RPG. The structure of the RPG and the TPE has important implications for the design of optimal breeding strategies. The breeder’s equation, together with the quantitative genetic theory behind the equation, informs many of the principles for design of breeding programs. The breeder’s equation can take many forms depending on the details of the breeding strategy. Through the genetic changes achieved by selection, the cultivated varieties of crops (cultivars) are improved for use in agriculture. From a breeding perspective, selection for specific trait combinations requires a quantitative link between the effects of the alleles of the genes impacted by selection and the trait phenotypes of plants and their breeding value. This gene-to-phenotype link function provides the G2P map for one to many traits. For complex traits controlled by many genes, the infinitesimal model for trait genetic variation is the dominant G2P model of quantitative genetics. Here we consider motivations and potential benefits of using the hierarchical structure of crop models as CGM-G2P trait link functions in combination with the infinitesimal model for the design and optimisation of selection in breeding programs.

scholarly journals Strategies Using Genomic Selection to Increase Genetic Gain in Breeding Programs for Wheat

2020 ◽  
Vol 11 ◽  
Author(s):  
Biructawit Bekele Tessema ◽  
Huiming Liu ◽  
Anders Christian Sørensen ◽  
Jeppe Reitan Andersen ◽  
Just Jensen
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Selection Criterion ◽  
Phenotypic Selection ◽  
Wheat Breeding ◽  
Breeding Program ◽  
Breeding Programs ◽  
Wheat Breeding Program ◽  
Estimated Breeding Values ◽  
The One

Conventional wheat-breeding programs involve crossing parental lines and subsequent selfing of the offspring for several generations to obtain inbred lines. Such a breeding program takes more than 8 years to develop a variety. Although wheat-breeding programs have been running for many years, genetic gain has been limited. However, the use of genomic information as selection criterion can increase selection accuracy and that would contribute to increased genetic gain. The main objective of this study was to quantify the increase in genetic gain by implementing genomic selection in traditional wheat-breeding programs. In addition, we investigated the effect of genetic correlation between different traits on genetic gain. A stochastic simulation was used to evaluate wheat-breeding programs that run simultaneously for 25 years with phenotypic or genomic selection. Genetic gain and genetic variance of wheat-breeding program based on phenotypes was compared to the one with genomic selection. Genetic gain from the wheat-breeding program based on genomic estimated breeding values (GEBVs) has tripled compared to phenotypic selection. Genomic selection is a promising strategy for improving genetic gain in wheat-breeding programs.

scholarly journals Effects of Different Strategies for Exploiting Genomic Selection in Perennial Ryegrass Breeding Programs

2020 ◽  
Author(s):  
Hadi Esfandyari ◽  
Dario Fè ◽  
Biructawit Bekele Tessema ◽  
Lucas L. Janss ◽  
Just Jensen
Keyword(s):  
Genomic Selection ◽  
Perennial Ryegrass ◽  
Genetic Gain ◽  
Additive Genetic Variance ◽  
Phenotypic Selection ◽  
Breeding Program ◽  
Breeding Programs ◽  
Traditional Program ◽  
Breeding Schemes ◽  
Efficient Selection

AbstractGenomic selection (GS) is a potential pathway to accelerate genetic gain for perennial ryegrass (Lolium perenne L.). The main objectives of the present study were to investigate the level of genetic gain and accuracy by applying GS in commercial perennial ryegrass breeding programs. Different scenarios were compared to a conventional breeding program. Simulated scenarios differed in the method of selection and structure of the breeding program. Two scenarios (Phen-Y12 and Phen) for phenotypic selection and three scenarios (GS-Y12, GS and GS-SP) were considered for genomic breeding schemes. All breeding schemes were simulated for 25 cycles. The amount of genetic gain achieved was different across scenarios. Compared to phenotypic scenarios, GS scenarios resulted in a significantly larger genetic gain for the simulated traits. This was mainly due to more efficient selection of plots and single plants based on GEBV. Also, GS allows for reduction in cycle time, which led to at least a doubling or a trebling of genetic gain compared to the traditional program. Reduction in additive genetic variance levels were higher with GS scenarios than with phenotypic selection. The results demonstrated that implementation of GS in ryegrass breeding is possible and presents an opportunity to make very significant improvements in genetic gains.

scholarly journals Modelling selection response in plant breeding programs using crop models as mechanistic gene-to-phenotype (CGM-G2P) multi-trait link functions

2020 ◽  
Author(s):  
M Cooper ◽  
O Powell ◽  
KP Voss-Fels ◽  
CD Messina ◽  
C Gho ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Plant Breeding ◽  
Complex Traits ◽  
Reference Population ◽  
Breeding Strategy ◽  
Breeding Value ◽  
Breeding Programs ◽  
Genetic Changes ◽  
Crop Models ◽  
Link Functions

AbstractPlant breeding programs are designed and operated over multiple cycles to systematically change the genetic makeup of plants to achieve improved trait performance for a Target Population of Environments (TPE). Within each cycle, selection applied to the standing genetic variation within a structured reference population of genotypes (RPG) is the primary mechanism by which breeding programs make the desired genetic changes. Selection operates to change the frequencies of the alleles of the genes controlling trait variation within the RPG. The structure of the RPG and the TPE has important implications for the design of optimal breeding strategies. The breeder’s equation, together with the quantitative genetic theory behind the equation, informs many of the principles for design of breeding programs. The breeder’s equation can take many forms depending on the details of the breeding strategy. Through the genetic changes achieved by selection, the cultivated varieties of crops (cultivars) are improved for use in agriculture. From a breeding perspective, selection for specific trait combinations requires a quantitative link between the effects of the alleles of the genes impacted by selection and the trait phenotypes of plants and their breeding value. This gene-to-phenotype link function provides the G2P map for one to many traits. For complex traits controlled by many genes, the infinitesimal model for trait genetic variation is the dominant G2P model of quantitative genetics. Here we consider motivations and potential benefits of using the hierarchical structure of crop models as CGM-G2P trait link functions in combination with the infinitesimal model for the design and optimisation of selection in breeding programs.

Sign in / Sign up

Export Citation Format

Share Document