scholarly journals Hydrogen Production From Water Under UV Radiation with Carbon Dioxide Mediation

Author(s):  
Antoni Morawski ◽  
Ewelina Kusiak-Nejman ◽  
Iwona Pelech ◽  
Katarzyna Ćmielewska ◽  
Daniel Sibera ◽  
...  

Abstract A simple method of hydrogen production through the decomposition of water subjected to UV radiation is presented. Water contained dissolved sodium hydroxide and the solution was saturated with carbon dioxide gas. During saturation, the pH value dropped from about 11.5 to 7-8. The produced bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing recombination of hydroxyl and hydrogen radicals, and giving priority to the formation of hydrogen gas.In the presented method, the production of hydrogen is combined with the utilization of carbon dioxide.

2016 ◽  
Vol 9 (1) ◽  
pp. 126-136 ◽  
Author(s):  
Dionisio H. Malagón-Romero ◽  
Alexander Ladino ◽  
Nataly Ortiz ◽  
Liliana P. Green

Hydrogen is expected to play an important role as a clean, reliable and renewable energy source. A key challenge is the production of hydrogen in an economically and environmentally sustainable way on an industrial scale. One promising method of hydrogen production is via biological processes using agricultural resources, where the hydrogen is found to be mixed with other gases, such as carbon dioxide. Thus, to separate hydrogen from the mixture, it is challenging to implement and evaluate a simple, low cost, reliable and efficient separation process. So, the aim of this work was to develop a polymeric membrane for hydrogen separation. The developed membranes were made of polysulfone via phase inversion by a controlled evaporation method with 5 wt % and 10 wt % of polysulfone resulting in thicknesses of 132 and 239 micrometers, respectively. Membrane characterization was performed using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and ASTM D882 tensile test. Performance was characterized using a 23 factorial experiment using the time lag method, comparing the results with those from gas chromatography (GC). As a result, developed membranes exhibited dense microstructures, low values of RMS roughness, and glass transition temperatures of approximately 191.75 °C and 190.43 °C for the 5 wt % and 10 wt % membranes, respectively. Performance results for the given membranes showed a hydrogen selectivity of 8.20 for an evaluated gas mixture 54% hydrogen and 46% carbon dioxide. According to selectivity achieved, H2 separation from carbon dioxide is feasible with possibilities of scalability. These results are important for consolidating hydrogen production from biological processes.


2012 ◽  
Vol 1387 ◽  
Author(s):  
Nitin Kalra ◽  
Kalathur Santhanam ◽  
David Olney

ABSTRACTThe electrochemical decomposition of water is an attractive method, however, the performance of the electrodes and efficiencies are of great concern in its large scale production. In this context, we wish to report here the superior performance of Ni-multiwalled carbon nanotube composite as cathode in the decomposition of water. The current voltage curves recorded with this electrode in different media showed a significant electrocatalysis in the reduction of hydrogen ion; the background electrolysis is shifted in the anodic direction. The nanocomposite composition has been found to be crucial in the efficient production of hydrogen. A coulombic efficiency of about 68% has been obtained at this electrode with a hydrogen production rate of 130L/m2 d. This electrode is more efficient than the 316L stainless steel (composition in percentage: C 0.019, Cr 17.3, Mo 2.04, Ni 11.3, Mn 1.04, N 0.041, Fe bulk) cathode that produces 10 ml/h at an area of 20 cm2 (5L/m2.h) (2). The results obtained with different electrolytes, performance variation with electrode composition, and current densities will be presented. The trials carried out using solar panel instead of DC power source showed similar hydrogen production rates and efficiencies.


1995 ◽  
Vol 65 (6) ◽  
pp. 265-271
Author(s):  
Seisuke Takashima ◽  
Michihiro Nakamura ◽  
Yukio Aoyama ◽  
Jun Oyama ◽  
Ichiei Yuhu ◽  
...  

2012 ◽  
Vol 512-515 ◽  
pp. 1400-1403 ◽  
Author(s):  
Zhi Qin ◽  
Dan Li

Energy crisis is paid more attention to its significance around the world. Hydrogen is considered the most potential alternate energy source due to the character of non-pollution and zero emissions. This paper researched the variation of hydrogen-producing rate, pH value and the proportion under five temperatures of 25°C, 30°C, 35°C, 40°C, 45°C through batch culture and the reasons of these appearance. And anaerobic hydrogen-producing bacteria’s isolation and enrichment culture was accomplished by Hungater’s anaerobic technique. The time of logarithmic phase was 24h, 16h, 12h, 20h and 28h and the stationary phase was 36h, 28h, 24h, 32h and 36h at 25°C, 30°C, 35°C, 40°C, 45°C. When the pH declined to 4.2-4.4, the hydrogen-production rate and the proportion all reached optimal state. The maximum proportion of hydrogen-production and total gas-production was 70.41% at 35°C. The optimal parameter was: the pH between 4.2-4.4 under the optimum temperature of 35°C.


Author(s):  
Hind Barghash ◽  
Kenneth E. Okedu ◽  
Aisha Al Balushi

Recently, it has become imperative to find new sustainable and renewable sources of energy, in order to avoid dependence on non-renewable traditional energy resources. This would help to overcome the depleting of natural resources for energy production. Hydrogen gas production using biological processes is one of the most attractive solutions in this regard, due to its high energy content and ecofriendly nature. Production of hydrogen using single photo-fermentation process and landfill leachate as substrate was carried out in this paper, by utilizing batch bio-reactor and anaerobic conditions. The pH value and temperature, play an essential role in a bio-hydrogen production process. Thus, in this study, the pH values considered were 6, 6.5, and 7.2, respectively, at a controlled temperature of 37 ± 1°C. This study investigated various schemes that have the possibility of producing hydrogen using; landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrate such as sucrose and glucose. All experiments were conducted with and without mixing, for effective comparative study. Heat and pH pretreatment were applied in each experiment with the objectives of decreasing the activities of methane-producing bacteria and enhancing the activities of hydrogen-producing bacteria. The hydraulic retention time used in this study was 48 h, in order to obtain optimal performance of the schemes employed. Analysis of liquid leachate was performed for each experiment, and based on the obtained results, the maximum yield of hydrogen produced was 5,754 ml H2/L, with a medium pH scale of 6.0, fermentation temperature of 37 ± 1°C and constant mixing speed of 100 rpm.


2020 ◽  
Vol 59 (SK) ◽  
pp. SKKD08
Author(s):  
Yuya Kitamura ◽  
Hirokazu Okawa ◽  
Takahiro Kato ◽  
Katsuyasu Sugawara

2016 ◽  
Author(s):  
Ernie R. Slucher ◽  
◽  
Peter D. Warwick ◽  
Christina A. DeVera ◽  
Celeste D. Lohr ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document