scholarly journals Design of a monitoring network: from macro to micro design

Author(s):  
Mathieu Lepot ◽  
Zoran Kapelan ◽  
Francois H. L. R. Clemens-Meyer

Abstract Designing a monitoring network or a measuring set-up or a monitoring station is a typical (multidisciplinary) engineering enterprise: a range of potentially conflicting demands (technical, financial and managerial) and limitations (e.g. availability of resources, skilled personnel, regulations) have to be respected. This chapter addresses the design aspects on both the macro scale (a monitoring network) and on the micro scale. The macro scale addresses what to measure, where to measure, how frequently to measure and the applications of models in the design process. On the micro scale issues with safety, accessibility and practical limitations are discussed. This chapter has close links with virtually all other chapters in this book and a comprehensive set of literature references is supplied to allow the interested reader to broaden his/her knowledge on the subject.

Pedagogika ◽  
2013 ◽  
Vol 112 (4) ◽  
pp. 140-147
Author(s):  
Ewa Jurczyk - Romanowska

The purpose of the present paper is to compare three levels of discourse on the subject of the 21st century family. The macro scale is represented by the ideas of the International Year of the Family + 20, the meso scale – by the postulates of the government of Poland aimed at the implementation of international presumptions in Poland. The reality experienced by single parents and its inherent evaluation of the realization of the government’s postulates constitutes the micro scale. Comparison of the three perspectives allows for a discernment of the shortcomings of the government’s postulates as well as the somewhat superficial character of the undertaken actions.


1988 ◽  
Vol 27 (3) ◽  
pp. 333-335
Author(s):  
Khwaja Sarmad

This book is a comprehensive analysis of farmers' movements in India with a focus on the movements in Tamil Nadu, Maharashtra, Punjab and Karnatka. It examines the economic, social and political aspects of the farmers' struggle for a better deal within regional and national perspectives and evaluates the potential impact of these struggles on economic development in general, and on rural development, in particular. In a most competent way the author has presented the current state of the debate on the subject. He deals exhaustively with the subject of agricultural price policy and argues against the proposition that favourable price-setting for farm products is adequate to alleviate rural poverty. A better way to tackle this problem is to improve the per capita output in the rural sector, since the root cause of the problem is not unfavourable terms of trade but the increasing proportion of land holdings, which are economically not viable. Agricultural price policy is analyzed within the context of class relations, which enables to establish a link between the economic and political demands of the farmers. This analysis leads the author to conclude, that in contrast with the peasants' movements in India, which helped to break up the feudal agrarian set-up, the recent farmers' movements, with a few exceptions, have little revolutionary content. Their leadership has been appropriated by the rich landowners, who have transformed the movements into a lobby for advancing their own interests, within the existing power structure, to the neglect of the poorer peasantry.


2018 ◽  
Vol 6 (2) ◽  
pp. 14
Author(s):  
Darmawan Darmawan ◽  
Jajang Setiawan

<p align="center"><strong>ABSTRACT</strong><strong></strong></p><p align="center"><strong> </strong></p><p align="justify"><em>Today, the growth of economic level begins to rise again that is generated by the increase of   different kind of product and different kind of businesses that are offered by both individual businesses that are done easly independently. To deal with all of business trends, the education institution has to prepare the students to be able to set up a business idenpendedntly through the subject of entrepeuneurship.  As it is regulated in Vision and Mision of study program and is also regulated in the curriculum of lectures. </em><em></em></p><p align="justify"><em>This research is aimed at to find out the correlation between the spirit of entrepeunership and motivation , Family background, and education level. Based on the research result, the finding showed that the spirit of entrepeneurship correlated with the motivation and family background. Based on the finding, it was also found that education level did not correlate with that the spirit of entrepeneurship. In regard with the findings, it is important to develop more the motivation of students to touch up the sperit of entrepenuership. </em><em></em></p><p align="justify"> </p><p><em>Key words: Entrepenuer, Students, Entrepeuneurship. </em></p>


The theory of the vibrations of the pianoforte string put forward by Kaufmann in a well-known paper has figured prominently in recent discussions on the acoustics of this instrument. It proceeds on lines radically different from those adopted by Helmholtz in his classical treatment of the subject. While recognising that the elasticity of the pianoforte hammer is not a negligible factor, Kaufmann set out to simplify the mathematical analysis by ignoring its effect altogether, and treating the hammer as a particle possessing only inertia without spring. The motion of the string following the impact of the hammer is found from the initial conditions and from the functional solutions of the equation of wave-propagation on the string. On this basis he gave a rigorous treatment of two cases: (1) a particle impinging on a stretched string of infinite length, and (2) a particle impinging on the centre of a finite string, neither of which cases is of much interest from an acoustical point of view. The case of practical importance treated by him is that in which a particle impinges on the string near one end. For this case, he gave only an approximate theory from which the duration of contact, the motion of the point struck, and the form of the vibration-curves for various points of the string could be found. There can be no doubt of the importance of Kaufmann’s work, and it naturally becomes necessary to extend and revise his theory in various directions. In several respects, the theory awaits fuller development, especially as regards the harmonic analysis of the modes of vibration set up by impact, and the detailed discussion of the influence of the elasticity of the hammer and of varying velocities of impact. Apart from these points, the question arises whether the approximate method used by Kaufmann is sufficiently accurate for practical purposes, and whether it may be regarded as applicable when, as in the pianoforte, the point struck is distant one-eighth or one-ninth of the length of the string from one end. Kaufmann’s treatment is practically based on the assumption that the part of the string between the end and the point struck remains straight as long as the hammer and string remain in contact. Primâ facie , it is clear that this assumption would introduce error when the part of the string under reference is an appreciable fraction of the whole. For the effect of the impact would obviously be to excite the vibrations of this portion of the string, which continue so long as the hammer is in contact, and would also influence the mode of vibration of the string as a whole when the hammer loses contact. A mathematical theory which is not subject to this error, and which is applicable for any position of the striking point, thus seems called for.


Author(s):  
Feng Li ◽  
Gulnigar Ablat ◽  
Siqi Zhou ◽  
Yixin Liu ◽  
Yufeng Bi ◽  
...  

AbstractIn ice and snow weather, the surface texture characteristics of asphalt pavement change, which will significantly affect the skid resistance performance of asphalt pavement. In this study, five asphalt mixture types of AC-5, AC-13, AC-16, SMA-13, SMA-16 were prepared under three conditions of the original state, ice and snow. In this paper, a 2D-wavelet transform approach is proposed to characterize the micro and macro texture of pavement. The Normalized Energy (NE) is proposed to describe the pavement texture quantitatively. Compared with the mean texture depth (MTD), NE has the advantages of full coverage, full automation and wide analytical scale. The results show that snow increases the micro-scale texture because of its fluffiness, while the formation of the ice sheets on the surface reduces the micro-scale texture. The filling effect of snow and ice reduces the macro-scale texture of the pavement surface. In a follow-up study, the 2D-wavelet transform approach can be applied to improve the intelligent driving braking system, which can provide pavement texture information for the safe braking strategy of driverless vehicles.


2019 ◽  
Vol 1 (1) ◽  
pp. 179-195 ◽  
Author(s):  
Tina Besley

This article explores concepts of teacher responsibility, accountability, being in loco parentis, and responsibilization as many advanced capitalist societies have dropped policies and practices that were set up in the mid 19th century after the Great Depression in the welfare state under Keynesian economics. Since the early 1980s most of these states have adopted neoliberal policies and market rationality for all aspects of social policy including education. Under neoliberalism, the subject theorised by Homo economicus, is one that is theorised as a rational autonomous individual, with its responsibilized behavior underpinning much of how not only teachers but students now are compleed to behace and perform. These have resulted in major shifts in attitudes to professionalism of teachers, in responsibilising individuals and so have impacted on subjectivity as the state has pulled back from all manner of social provision and has responsibilized the individual to be a consumer-citizen, a prudential and entrepreneurial self even in terms of education. The upshot is increasing use of audits, checklists and accountability regimes for teachers who are becoming increasingly a de-professionalised in a low-trust managerialist environment with students as consumers.


2006 ◽  
Vol 12 (4) ◽  
pp. 461-485 ◽  
Author(s):  
Keisuke Suzuki ◽  
Takashi Ikegami

We study a system of self-replicating loops in which interaction rules between individuals allow competition that leads to the formation of a hypercycle-like network. The main feature of the model is the multiple layers of interaction between loops, which lead to both global spatial patterns and local replication. The network of loops manifests itself as a spiral structure from which new kinds of self-replicating loops emerge at the boundaries between different species. In these regions, larger and more complex self-replicating loops live for longer periods of time, managing to self-replicate in spite of their slower replication. Of particular interest is how micro-scale interactions between replicators lead to macro-scale spatial pattern formation, and how these macro-scale patterns in turn perturb the micro-scale replication dynamics.


1960 ◽  
Vol 106 (442) ◽  
pp. 281-287 ◽  
Author(s):  
Irene Martin

Any particular system which is being conditioned is likely to maintain a certain level of background activity throughout the experimental procedure; either of a discontinuous nature, as, for example, with eyeblink, heart rate and respiratory cycle, or continuously, as in the case of basal skin resistance and muscle tonus. This background activity or level of arousal does not remain constant but usually varies in time, presumably as a result of underlying neural excitation or inhibition. It may increase throughout an experiment if the subject becomes highly motivated, as with the gradients of muscle action potentials observed by Bartoshuk (1955), or decrease, if the subject becomes more relaxed and familiar with the set-up, as Duffy and Lacey (1946) found with level of skin conductance.


1960 ◽  
Vol 15 (5) ◽  
pp. 759-763 ◽  
Author(s):  
J. W. Snellen

When studying a walking subject's thermal exchange with the environment, it is essential to know whether in level walking any part of the total energy expenditure is converted into external mechanical work and whether in grade walking the amount of the external work is predictable from physical laws. For this purpose an experiment was set up in which a subject walked on a motor-driven treadmill in a climatic room. In each series of measurements a subject walked uphill for 3 hours and on the level for another hour. Metabolism was kept equal in both situations. Air and wall temperatures were adjusted to the observed weighted skin temperature in order to avoid any heat exchange by radiation and convection. Heat loss by evaporation was derived from the weight loss of the subject. All measurements were carried out in a state of thermal equilibrium. In grade walking there was a difference between heat production and heat loss by evaporation. This difference equaled the caloric equivalent of the product of body weight and gained height. In level walking the heat production equaled heat loss. Hence it was concluded that in level walking all the energy is converted into heat inside the body. Submitted on April 26, 1960


2018 ◽  
Vol 115 (4) ◽  
pp. 413
Author(s):  
Nida Naveed

This study, on a micro-scale, of the WEDM cut surfaces of specimens to which the contour method of residual stress measurement is being applied provides detailed information about the effects of the cutting process on the surface quality. This is defined by a combination of several parameters: variation in surface contour profile, sub-surface damage and surface texture. Measurements were taken at the start, the middle and at the end of the cut. This study shows that during WEDM cutting, a thin layer, extending to a depth of a few micrometres below the surface of the cut, is transformed. This layer is known as the recast layer. Using controlled-depth etching and X-ray diffraction, it is shown that this induces an additional tensile residual stress, parallel to the plane of the cut surface. The WEDM cut surface and sub-surface characteristics are also shown to vary along the length of the cut. Moreover, these micro-scale changes were compared with macro-scale residual stress results and provides an indication of the point at which the changes occurred by cutting process can be significantly relative to the macro-scale residual stress in a specimen.


Sign in / Sign up

Export Citation Format

Share Document