Studi Literatur: Aplikasi dan Fungsi Porang (Amorphophallus Oncophyllus) dalam Frozen Yoghurt

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Novia Fadhilah Zain ◽  
Tjandra Pantjajani ◽  
Theresia Desy Askitosari
Keyword(s):  
Titratable Acidity ◽  
High Water ◽  
Melting Rate ◽  
Mixed Cultures ◽  
Freezing Process ◽  
Low Viscosity ◽  
Frozen Yogurt ◽  
Different Strains ◽  
Freezing Storage

Abstract — Frozen yoghurt is a frozen desserts made with yoghurt and quite similar to ice cream but low in calorie, which cointains milk, sweetener, stabilizers, emulsifier, and lactic acid bacteria (LAB) cultures through combination of process freezing and agitation. The optimal pH about 5.5 on LAB growth and the use of different strains of LAB culture or LAB mixed cultures that can maintain the viability of LAB during processing and freezing storage of frozen yoghurt. The use of LAB mixed cultures could improve viscos ity and overrun of frozen yogurt. The viability of the LAB cultures remained above minimal limit of 107CFU/g in frozen yogurt due to the viability of LAB decrease significantly during processing and freezing storage , high viable survival rate during delivery through the gastrointestinal tract higher than 106CFU/g. The issues that often arise relates to frozen yogurt processing are a grainy texture, faster melting rate and the low viscosity and overrun value. Addition of porang flour in frozen Yogurt as stabilizer and emulsifier that has an extremely high water-holding capacity, which is able to bind water 200 times its molecular weight due to its high solubility, porang glucomannan gel formed in freezing process which can improve the quality of organoleptic having the better consistency and texture of frozen yoghurt. The use of different concentration of porang flour which can have different result in the final gel formed, have complex effects on viscosity, overrun, melting rate, pH, titratable acidity (TA), total LAB and decrease the ability proteolysis of LAB in frozen yoghurt. Keywords: frozen yoghurt, porang, viability   Abstrak— Frozen yoghurt merupakan jenis dari makanan penutup seperti es krim yang dibuat menggunakan yoghurt sebagai bahan utama yang terdiri dari susu, bahan pemanis, stabilisator, pengemulsi, dan kultur BAL melalui kombinasi proses pembekuan dan agitasi. pH optimal diantara 5.5 mendukung pertumbuhan BAL dengan baik dan penggunaan kultur BAL strain yang berbeda maupun kultur BAL kombinasi dalam upaya mempertahankan viabilitas BAL selama proses pembuatan dan pembekuan frozen yoghurt. Penggunaan kultur BAL kombinasi juga meningkatkan viskositas dan overrun frozen yoghurt. Persyaratan jumlah BAL minimal 107CFU/g dalam pembuatan frozen yoghurt karena adanya penurunan viabilitas BAL selama produksi berlangsung dan penyimpanan beku frozen yoghurt, serta syarat jumlah bakteri hidup yang sampai di saluran pencernaan harus lebih dari 106CFU/g. Permasalahan yang sering timbul pada proses pembuatan frozen yoghurt adalah tekstur yang tidak lembut, viskositas yang rendah, kecepatan meleleh yang cepat, dan overrun rendah. Adanya penambahan tepung porang dalam frozen yoghurt sekaligus sebagai stabilisator dan pengemulsi yang mengikat molekul air dalam jumlah besar, yakni hingga 200 kali lipat berat molekulnya karena kelarutannya yang tinggi, sehingga membentuk gel porang glukomannan pada saat pembekuan yang dapat meningkatkan mutu organoleptik dengan memiliki tekstur yang lebih baik pada frozen yoghurt. Penggunaan konsentrasi tepung porang yang berbeda, pembentukan gel yang dihasilkan juga berbeda dan terdapat pengaruh terhadap viskositas, overrun, kecepatan meleleh, pH, asam tertitrasi, total BAL dan menurunkan kemampuan proteolisis BAL pada frozen yoghurt. Kata kunci: frozen yoghurt, porang, viabilitas

scholarly journals Modern assessment of bakery properties of Russian wheat

2021 ◽  
Vol 83 (1) ◽  
pp. 155-162
Author(s):  
E. P. Meleshkina ◽  
S. N. Kolomiets ◽  
N. S. Zhiltsova ◽  
O. I. Bundina
Keyword(s):  
Rheological Properties ◽  
High Water ◽  
Climatic Conditions ◽  
Falling Number ◽  
Low Viscosity ◽  
High Water Absorption ◽  
Wide Range ◽  
The Russian Federation ◽  
Starch Retrogradation

The paper presents an analysis of the quality of soft wheat grown in different soil and climatic conditions of the Russian Federation and having a wide range of quality indicators (the amount of gluten - from 15.3 to 29.4%, the quality of gluten - from 29 to 84 units. IIR, falling number - from 134 to 475 sec). Revealed significant differences in the quality of modern Russian wheat from the wheat of the late XX century. The interrelationships of indicators of quality of grain, flour obtained from it, rheological properties of dough with indicators of quality of bread on a modern instrument base using an alveograph, valorigraph and mixolab have been established. The study of the rheological properties of the dough on the mixolab was carried out in the classical "Chopin Wheat +" mode. According to the profiler parameters (radial diagram), it was found that the analyze grain was characterized by increased rates of starch retrogradation, which characterizes the carbohydrate-amylase complex of flour, a high water absorption index, and increased amylolytic activity; low viscosity and gluten +. To differentiate the strength of wheat, a test laboratory baking of bread was carried out using two methods - the remix method and the reduced-remix method, which showed that the most stable relationships were revealed when baking bread with the remix method. When baking with the abbreviated method, higher indicators of bread quality were obtained, but there are fewer stable relationships, moreover, both for wheat containing less than 25% gluten and more than 25%.

scholarly journals Evaluation of physicochemical properties and viability of starter culture of liquid cheese whey-based frozen yogurts supplemented with inulin

2021 ◽  
Vol 51 (12) ◽  
Author(s):  
Viviane Michele dos Santos ◽  
Gerlane Souza de Lima ◽  
Viviane Lansky Xavier de Souza Leão ◽  
Karina Correia da Silveira ◽  
Tânia Lúcia Montenegro Stamford
Keyword(s):  
Physicochemical Properties ◽  
Cheese Whey ◽  
Starter Culture ◽  
Storage Period ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Melting Rate ◽  
Starter Cultures ◽  
Culture Viability ◽  
Frozen Yogurt

ABSTRACT: The study aimed to analyze the physicochemical properties and starter culture viability of frozen yogurts produced with liquid cheese whey (LCW) and inulin at different proportions (F0: 66% LCW and 0% inulin; F1: 65% LCW and 1% inulin; F2: 64% LCW and 2% inulin; F3: 62% LCW and 4% inulin). Results demonstrated that the frozen yogurt F3 presented higher total solids and carbohydrates levels. LCW and inulin contributed to the overrun increase (11.8-18.2%) but did not interfere significantly in the retardation of the melting rate and range in the samples’ hardness. Over the storage time, formulation F3 showed lower pH and higher titratable acidity. However, from the sixtieth day of storage, the formulations of frozen yogurts varied in the pH and titratable acidity profile associated with the decline in the viability of starter cultures. Even so, the inulin supplementation positively affected the strains’ viability during storage. Based on our data, the formulation F3 presented better nutritional value, physicochemical characteristics, and stability over the storage period.

scholarly journals Drought and Salinity in Citriculture: Optimal Practices to Alleviate Salinity and Water Stress

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1283
Author(s):  
Vasileios Ziogas ◽  
Georgia Tanou ◽  
Giasemi Morianou ◽  
Nektarios Kourgialas
Keyword(s):  
Agricultural Sector ◽  
Review Paper ◽  
Cell Metabolism ◽  
High Water ◽  
Crop Productivity ◽  
Fruit Tree ◽  
Key Factors ◽  
Negative Effect

Among the various abiotic stresses, drought is the major factor limiting crop productivity worldwide. Citrus has been recognized as a fruit tree crop group of great importance to the global agricultural sector since there are 140 citrus-producing countries worldwide. The majority of citrus-producing areas are subjected to dry and hot summer weather, limited availability of water resources with parallel low-quality irrigation water due to increased salinity regimes. Citrus trees are generally classified as “salt-intolerant” with high water needs, especially during summer. Water scarcity negatively affects plant growth and impairs cell metabolism, affecting the overall tree growth and the quality of produced fruit. Key factors that overall attempt to sustain and withstand the negative effect of salinity and drought stress are the extensive use of rootstocks in citriculture as well as the appropriate agronomical and irrigation practices applied. This review paper emphasizes and summarizes the crucial role of the above factors in the sustainability of citriculture.

scholarly journals Late-Maturity Alpha-Amylase in Wheat (Triticum aestivum) and Its Impact on Fresh White Sauce Qualities

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 201
Author(s):  
Galex K. S. Neoh ◽  
Mark J. Dieters ◽  
Keyu Tao ◽  
Glen P. Fox ◽  
Phuong T. M. Nguyen ◽  
...  
Keyword(s):  
Grain Filling ◽  
Drastic Reduction ◽  
Product Usage ◽  
Low Viscosity ◽  
Pasting Characteristics ◽  
Late Maturity ◽  
Semi Solid ◽  
New Applications ◽  
White Sauce

When wheat experiences a cold-temperature ‘shock’ during the late stage of grain filling, it triggers the abnormal synthesis of late-maturity α-amylase (LMA). This increases the enzyme content in affected grain, which can lead to a drastic reduction in falling number (FN). By commercial standards, a low FN is taken as an indication of inferior quality, deemed unsuitable for end-product usage. Hence, LMA-affected grains are either rejected or downgraded to feed grade at the grain receiving point. However, previous studies have found no substantial correlation between low FN-LMA and bread quality. The present study extends previous investigations to semi-solid food, evaluating the physical quality of fresh white sauce processed from LMA-affected flour. Results show that high-LMA flours had low FNs and exhibited poor pasting characteristics. However, gelation occurred in the presence of other components during fresh white sauce processing. This demonstrates that LMA-affected flours may have new applications in low-viscosity products.

scholarly journals Phytochemical changes in mango fruit in response to Alternaria alternata infection

2018 ◽  
Vol 36 (No. 3) ◽  
pp. 227-232 ◽  
Author(s):  
Jiao Li ◽  
Liangang Mao ◽  
Yanning Zhang ◽  
Lan Zhang ◽  
Hongyun Jiang
Keyword(s):  
Superoxide Dismutase ◽  
Vitamin C ◽  
Fruit Quality ◽  
Alternaria Alternata ◽  
Enzyme Activities ◽  
Phenylalanine Ammonia Lyase ◽  
Titratable Acidity ◽  
Mango Fruit ◽  
Malondialdehyde Content

Changes in mango fruit quality, malondialdehyde content, and enzymatic activities in response to pathogen Alternaria alternata infection were studied. A. alternata significantly affected the appearance of mango fruit at 5 and 7 days after treatment (DAT). The quality of pathogen-infected fruit first showed a significant decrease in titratable acidity and vitamin C content and a significant increase in pH since 3 DAT. The malondialdehyde content was higher than that in the untreated controls at 3 and 7 DAT. The enzyme activities of ascorbate peroxidase and polyphenol oxidase showed significant increases since 3 DAT. Significant increases in l-phenylalanine ammonia-lyase and superoxide dismutase activities were observed at 7 DAT. These results indicate that A. alternata infection first significantly affects some biochemical constituents and enzyme activities in mango fruit since 3 DAT and that there was no significant effect on appearance until 5 DAT.

scholarly journals Pre-Harvest Treatment of Chitosan Oligosaccharides Improved Strawberry Fruit Quality

2018 ◽  
Vol 19 (8) ◽  
pp. 2194 ◽  
Author(s):  
Yanqiu He ◽  
Santosh Bose ◽  
Wenxia Wang ◽  
Xiaochen Jia ◽  
Hang Lu ◽  
...  
Keyword(s):  
Cell Wall ◽  
Plant Immunity ◽  
Titratable Acidity ◽  
Growth Stages ◽  
Chitosan Oligosaccharide ◽  
Uniform Size ◽  
Chitosan Oligosaccharides ◽  
Soluble Solid ◽  
Regulated Gene Expression

Chitosan oligosaccharide (COS), derived through hydrolysis of chitosan, has been proved to be an effective plant immunity elicitor, eco-friendly, and easily soluble in water, and influenced several secondary metabolites content to improve fruit qualities. COS are widely used in agriculture to improve the defense response in plants. The purpose of this study was to investigate the pre-harvest treatment effect of COS on the quality of strawberry (Fragaria × ananassa cv.qingxiang). COS was dissolved in distilled water at a concentration of 50 mg·L−1 and sprayed at four different growth stages of strawberry plants, namely seedling stage, before flowering, fruit coloring (the stage of fruit from white to red) and full bloom. Uniform size, shape, color, without any visible damage, and disease-free fruits were harvested for determining the quality. The results showed that the fruit firmness, viscosity, lignin, sugars, protein, total soluble solid, and titratable acidity content increased in COS-treated fruits compared to control. In addition, COS pre-harvest treatment had a positive effect on anthocyanin, total phenol, flavonoid, vitamin C content and DPPH(2,2-diphenyl-1-picrylhydrazyl) scavenging activity of strawberry. Moreover, COS also increased the cell wall composition and regulated gene expression of some important enzymes involved in ethylene compound biosynthesis and cell wall degradation. The finding of this study suggests that pre-harvest application of COS is very useful for improving quality and antioxidant capacity of strawberry.

scholarly journals Impact of High-Pressure Homogenization Parameters on Physicochemical Characteristics, Bioactive Compounds Content, and Antioxidant Capacity of Blackcurrant Juice

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1802
Author(s):  
Bartosz Kruszewski ◽  
Katarzyna Zawada ◽  
Piotr Karpiński
Keyword(s):  
High Pressure ◽  
Vitamin C ◽  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Food Preservation ◽  
Inlet Temperature ◽  
High Pressure Homogenization

High-pressure homogenization (HPH) is one of the food-processing methods being tested for use in food preservation as an alternative to pasteurization. The effects of the HPH process on food can vary depending on the process parameters used and product characteristics. The study aimed to investigate the effect of pressure, the number of passes, and the inlet temperature of HPH processing on the quality of cloudy blackcurrant juice as an example of food rich in bioactive compounds. For this purpose, the HPH treatment (pressure of 50, 150, and 220 MPa; one, three, and five passes; inlet temperature at 4 and 20 °C) and the pasteurization of the juice were performed. Titratable acidity, pH, turbidity, anthocyanin, vitamin C, and total phenolics content, as well as colour, and antioxidant activity were measured. Heat treatment significantly decreased the quality of the juice. For processing of the juice, the best were the combinations of the following: one pass, the inlet temperature of 4 °C, any of the used pressures (50, 150, and 220 MPa); and one pass, the inlet temperature of 20 °C, and the pressure of 150 MPa. Vitamin C and anthocyanin degradation have been reported during the HPH. The multiple passes of the juice through the machine were only beneficial in increasing the antioxidant capacity but negatively affected the colour stability.

New Gel Aggregates To Improve Sweep Efficiency During Waterflooding

2011 ◽  
Vol 14 (01) ◽  
pp. 120-128 ◽  
Author(s):  
Guanglun Lei ◽  
Lingling Li ◽  
Hisham A. Nasr-El-Din
Keyword(s):  
Low Cost ◽  
Oil Production ◽  
High Water ◽  
Resistance Factor ◽  
Water Production ◽  
Sweep Efficiency ◽  
Low Viscosity ◽  
Productivity Decline ◽  
High Water Cut ◽  
Water Cut

Summary A common problem for oil production is excessive water production, which can lead to rapid productivity decline and significant increases in operating costs. The result is often a premature shut-in of wells because production has become uneconomical. In water injectors, the injection profiles are uneven and, as a result, large amounts of oil are left behind the water front. Many chemical systems have been used to control water production and improve recovery from reservoirs with high water cut. Inorganic gels have low viscosity and can be pumped using typical field mixing and injection equipment. Polymer or crosslinked gels, especially polyacrylamide-based systems, are mainly used because of their relatively low cost and their supposed selectivity. In this paper, microspheres (5–30 μm) were synthesized using acrylamide monomers crosslinked with an organic crosslinker. They can be suspended in water and can be pumped in sandstone formations. They can plug some of the pore throats and, thus, force injected water to change its direction and increase the sweep efficiency. A high-pressure/high-temperature (HP/HT) rheometer was used to measure G (elastic modulus) and G" (viscous modulus) of these aggregates. Experimental results indicate that these microspheres are stable in solutions with 20,000 ppm NaCl at 175°F. They can expand up to five times their original size in deionized water and show good elasticity. The results of sandpack tests show that the microspheres can flow through cores with permeability greater than 500 md and can increase the resistance factor by eight to 25 times and the residual resistance factor by nine times. The addition of microspheres to polymer solutions increased the resistance factor beyond that obtained with the polymer solution alone. Field data using microspheres showed significant improvements in the injection profile and enhancements in oil production.

scholarly journals Quality of Cooked Ground Beef Extended with Defatted Peanut Meal1

1981 ◽  
Vol 8 (1) ◽  
pp. 31-35 ◽  
Author(s):  
Esam M. Ahmed ◽  
Roger L. West
Keyword(s):  
Meat Products ◽  
Peanut Meal ◽  
Ground Meat ◽  
Shearing Force ◽  
Sensory Acceptability ◽  
Beef Products ◽  
Cooked Meat ◽  
Freezing Storage ◽  
Cooked Meat Products

Abstract Beef chuck and plate cuts obtained from U.S.D.A. utility grade carcass were mixed and ground through a 0.318 cm plate. The ground meat was extended with extruded and non-extruded defatted peanut meal. Hydrated defatted peanut meal was added at the rate of 20 and 30 parts to 80 and 70 parts of the ground meat, respectively. All treatments were formulated to contain 20% fat in the final patty and loaf products. Extruded and non-extruded meat products were stored at −18 C for periods up to 6 weeks. All quality evaluations were conducted on cooked meat products. Ground meat patties and loaves extended with non-extruded peanut meal exhibited similar cooking losses to those either extended with extruded peanut meal or 100% beef products. Control meat products stored for 4 weeks or longer required larger forces to shear than the non-stored patties. Freezing storage of the extended meat products did not result in a change of shearing forces. These forces were similar to the shearing force exhibited by freshly prepared products. Trained sensory panelists indicated that extended meat patties were more tender and less cohesive than non-extended patties. However, sensory acceptability tests indicated similar acceptability ratings for the extended and non-extended meat patties and loaves.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

Sign in / Sign up

Export Citation Format

Share Document