scholarly journals Evaluation of Different Cultivars of Tuberose (Polianthes tuberosa L.) under Humid agro Climatic conditions of Goa

2019 ◽  
Vol 14 (2) ◽  
pp. 109-114
Author(s):  
Safeena S A ◽  
Thangam M ◽  
Singh N P
Keyword(s):  
Performance Evaluation ◽  
Plant Height ◽  
Climatic Conditions ◽  
Leaf Length ◽  
Vase Life ◽  
Fresh Weight ◽  
Commercial Cultivation ◽  
Flowering Behaviour ◽  
Number Of Leaves ◽  
Stalk Length

Tuberose (Polianthes tuberosa L.) is one of the most important tropical bulbous-ornamental cultivated for production of long-lasting flowers spikes. Adaptation and acclimatization of different cultivars under humid agro-climatic conditions of Goa are to be confirmed for their better performance. The present investigation was conducted to evaluate the performance of tuberose cultivars under agro-climatic conditions of Goa during 2014- 2017. Five single and six double cultivars of tuberose were evaluated during the study period. All the cultivars differed in their growth and flowering behaviour. Among the single cultivars, evaluated, maximum number of florets per spike (47.00) was observed in Pune local whereas spike-length (75.59 cm) was maximum in Mexican Single. Among the double cultivars, evaluated, maximum plant height (52.21 cm) and maximum number of leaves per plant (59.63) were recorded with cultivar Arka Suvasini. Leaf length was significantly higher (52.93 cm) in Pearl double whereas leaf width (2.04 cm) was maximum in Calcutta Double. Days to appearance of flower spike were earlier in Arka Suvasini. Minimum days taken for opening of basal floret (84.88 days) were recorded with cultivar Arka Suvasini. Spike girth (0.68 cm), Spike fresh-weight (69.06 cm), floret stalk-length (3.6 cm), floret diameter (5.24 cm), weight of individual floret (3.49 g) and vase life (7.93 days) was significantly maximum in Cv. Arka Suvasini followed by Pearl Double. Based on the performance evaluation cv. Mexican Single among single types and cv. Arka Suvasini and Pearl Double among double types could be recommended for commercial cultivation under agro climatic conditions of Goa.

scholarly journals Effect of summer season on correlation coefficient in bird of paradise (Strelitzia reginae) progenies

2017 ◽  
Vol 9 (1) ◽  
pp. 364-369
Author(s):  
Airadevi P. Angadi ◽  
B. S. Reddy ◽  
R. C. Jagadeesha ◽  
Balaji S. Kulkarni ◽  
S. Nishani
Keyword(s):  
Correlation Analysis ◽  
Plant Height ◽  
Leaf Length ◽  
Summer Season ◽  
Leaf Width ◽  
Vase Life ◽  
Flower Stalk ◽  
Positive Correlations ◽  
Strelitzia Reginae ◽  
Stalk Length

The study pertaining to the effect of summer season on correlation analysis in bird of paradise (Strelitzia reginae) was carried out among forty progenies. The results of correlation analysis for twelve parameters (plant height, stem girth, leaf length, leaf width, number of leaves per plant, number of suckers/m 2 , flower stalk length, flower stalk girth, spath length, no. of bracts, vase life and no. of flowers/ m 2 ) at genotypic and phenotypic levels revealed that number of flowers per m 2 of progenies during summer, 2011 showed positive and significant correlations with plant height (0.357 and 0.237) and number of suckers/ m2 (0.880 and 0.899). Whereas, it showed positive and significant correlation with stem girth (0.203), leaf width (0.202) and flower stalk girth (0.265) at genotypic level only. While during summer 2012, number of flowers per m 2 showed positive correlations with plant height (0.265 and 0.242), stem girth (0.232 and 0.215), number of suckers/ m 2 (0.913 and 0.900) and flower stalk length (0.268 and 0.249) at genotypic and phenotypic levels. Hence, the selection of these characters would be effective in improving yield in bird of paradise crop.

FAST NEUTRONS INDUCED GENETIC VARIABILITY ON BAMBARA NUT (VIGNA SUBTERRANEAN (L.) VERDC.)

1970 ◽  
pp. 10-12
Author(s):  
M.I. Adebola, A.E. Esson
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Dry Weight ◽  
Leaf Length ◽  
Bambara Groundnut ◽  
Leaf Width ◽  
Fast Neutrons ◽  
Fresh Weight ◽  
Randomized Block Design ◽  
Number Of Leaves

In this study, two accessions of Bambara groundnut were exposed to fast neutrons Americium-Beryllium (AmBe) source with flux of 1.5 ×104 ncm-2 s-1for different hours, and planted in a completely randomized block design (RCBD) with three replications to raise M1 generation. The data recorded were percentage germination, plant height, number of leaves, leaf length, leaf width, days to 50% flowering, number of pods per plant, fresh weight of plants, dry weight of plants, dry weight of pods, weight of seeds and100 seeds weight. There was variation in plant height, number of leaves, leaf length, leaf width, Days to 50% flowering, fresh weight of plants, dry weight of plants, dry weight of pods, weight of seeds and100 seeds weight for Black accession. In the Cream accession, days to 50% flowering, number of pods per plant, fresh weight of plants, dry weight of plants, dry weight of pods, weight of seeds and100 seeds weight were significantly different. Treatment at 16 hours performed best for plant height, leaf length, number of leaves, weight of seed per plant and 100 seed weight in Black accession while Cream performed best at 8 hours exposure time. Fast neutron was observed to improve the performance of Bambara groundnut, thus can be used in breeding programme for Bambara groundnut.

scholarly journals PENGGUNAAN BEBERAPA JENIS BAHAN ORGANIK DENGAN WAKTU APLIKASI YANG BERBEDA PADA BUDIDAYA TANAMAN SAWI (Brassica juncea L.)

EUGENIA ◽  
2018 ◽  
Vol 23 (3) ◽  
Author(s):  
S. Sompotan ◽  
J. S.M. Raintung
Keyword(s):  
Organic Matter ◽  
Plant Height ◽  
Brassica Juncea ◽  
Organic Material ◽  
Leaf Length ◽  
Growth And Yield ◽  
Application Time ◽  
Fresh Weight ◽  
Random Design ◽  
Number Of Leaves

ABSTRACT Research on the Use of Multiple Types of Organic Materials with Different Application Times on Mustard (Brassica juncea L.) was conducted to study the effect of organic material source interaction and application time in improving the growth and yield of mustard and obtaining organic sources of materials and timing applications to improve growth and yield of mustard. Factorial research with two factors is designed using Group Random Design. The first factor was: source of organic material (A) consisted of: A1 = pig waste, A2 = cattle dung, A3 = rice straw. The second factor is application time (B) Time: B1 = 5 days before planting seedlings (SBTB), B2 = 10 days before planting seedlings (SBTB), B3 = 15 days before planting seedlings (SBTB) Each experimental unit is repeated three times there were 27 pot of experiments, the variables observed were: plant height, leaf number, leaf width, leaf length and weight of wet stratum. The data were analyzed using variance analysis and if there were difference followed by  Honest Real DifferenceTest at 5%. The results showed that effect of interaction between source of organic matter with different application time to the number of leaves, fresh weight, content of N, P, and K of soil after harvesting of mustard. Plant height and leaf length is singly affected by application time.  Source of organic material of cow dung and paddy straw at the time of application 10 and 15 days before planting seedlings give the best result on the number of leaves, fresh weight of mustard, N, P and K.Keywords: mustard, organic matter source, application time, organic fertilizer ABSTRAK Penelitian Penggunaan Beberapa Jenis Bahan Organik dengan Waktu Aplikasi yang Berbeda Pada Budidaya Tanaman Sawi (Brassica juncea L.) dilakukan untuk mempelajari pengaruh interaksi sumber bahan organik dan waktu aplikasi dalam meningkatkan pertumbuhan dan hasil sawi serta memperoleh sumber bahan organik dan aplikasi waktu yang tepat dalam meningkatkan pertumbuhan dan hasil sawi. Penelitian faktorial dengan dua faktor dirancang dengan menggunakan Group Random Design. Faktor pertama adalah: sumber bahan organik (A) terdiri dari: A1 = limbah babi, A2 = kotoran ternak, A3 = jerami padi. Faktor kedua adalah waktu aplikasi (B) Waktu: B1 = 5 hari sebelum penanaman bibit (SBTB), B2 = 10 hari sebelum penanaman bibit (SBTB), B3 = 15 hari sebelum penanaman bibit (SBTB) Setiap unit percobaan diulang sebanyak tiga kali Ada 27 pot percobaan, variabel yang diamati adalah: tinggi tanaman, jumlah daun, lebar daun, panjang daun dan berat lapisan basah. Data dianalisis dengan menggunakan analisis varians dan jika ada perbedaan yang diikuti oleh Jujur Real DifferenceTest sebesar 5%. Hasil penelitian menunjukkan bahwa pengaruh interaksi antara sumber bahan organik dengan waktu penerapan yang berbeda terhadap jumlah daun, bobot segar, kadar N, P, dan K tanah setelah pemanenan sawi. Tinggi tanaman dan panjang daun secara tunggal dipengaruhi oleh waktu aplikasi. Sumber bahan organik kotoran sapi dan jerami padi pada saat aplikasi 10 dan 15 hari sebelum penanaman bibit memberikan hasil terbaik pada jumlah daun, bobot segar sawi, N, P dan K.Keywords: tanaman sawi, sumber bahan organik, waktu aplikasi, pupuk organik

Effect of Hydroponic and Conventional Production Systems on Plant Growth Performance and Nitrate Content of Green Coral Lettuce (Lactuca sativa var. Crispa)

2021 ◽  
Vol 1 (1) ◽  
pp. 51-56
Author(s):  
Dayang Nur Hidayah Abg Muis ◽  
Azimah Hamidon ◽  
Nor Elliza Tajidin ◽  
Zahir Shah Safari
Keyword(s):  
Plant Growth ◽  
Growth Performance ◽  
Plant Height ◽  
Production Systems ◽  
Leaf Length ◽  
Leafy Vegetables ◽  
Nitrate Content ◽  
Fresh Weight ◽  
Conventional Production ◽  
Number Of Leaves

Overfertilization on leafy vegetables could accumulate high nitrate content. Exceeded recommended limit of nitrate content can cause detrimental effects on the environment and human health, such as methemoglobinemia and stomach cancer. Green coral lettuce (GCL) is a leafy vegetable commonly grown under various production systems. Production system and physiological age have affected the growth and accumulation of nitrate levels in most leafy vegetables. Therefore, this study aims to determine the effects of hydroponic and conventional production on the growth performance and nitrate concentration of GCL at different harvest ages. This research was conducted in a randomized complete block design with a factorial arrangement of treatments. A stagnant hydroponic was prepared using stock A and B complete Hoagland nutrient solutions as liquid fertilizer. A commercial biofertilizer (NPK 8: 8: 8) was applied at the rate of 100 g per plant. Plant growth performance, including plant height, number of leaves, and leaf length, was measured at 7, 14, 21, 28, 31, 34, 41, and 44 days after transplanting (DAT). The fresh weight and nitrate content were measured at 31, 34, 41, and 44 DAT. The results showed hydroponic GCL exhibited higher plant height than conventional GCL. However, both productions were not significantly affected regarding the number of leaves, leaf length, and fresh weight. At 41 and 44 DAT, the hydroponic GCL was markedly higher in nitrate content than conventional. This study found that conventional production was recommended for GCL because lower in nitrate content compared to hydroponic and fair in growth performance.

Effect of Spraying Foliar with Humus and Izomen Biostimulants on Some Vegetative and Flowering Parameters of Freesia hybrida L.

2019 ◽  
Vol 9 (2) ◽  
pp. 240-246
Author(s):  
Neveen Anwer Abdalla
Keyword(s):  
Plant Height ◽  
Landscape Design ◽  
Vase Life ◽  
College Of Agriculture ◽  
Flowering Date ◽  
Freesia Hybrida ◽  
Loam Soil ◽  
Number Of Leaves ◽  
The University

The experiment has been conducted in the nursery of the Department of Horticulture and Landscape Design, College of Agriculture, the University of Basrah to study the effect of Spraying foliar of the biostimulants Izomen and Humus on the growth and flowering of Freesia plants. The corms in similar size were planted in pots with a diameter and height of 25 cm, which filled with 2.5 kg of sterilized loam soil. After 50 days of planting, the plants sprayed with Humus at 0, 1.5, 2.5 ml L-1 and after five days sprayed with Izomen at 0, 1.5, 2.5 ml L-1 The different concentrations of biostimulants are sprayed three times, the period between one spray and another 15 is days. The results showed that the spraying of Humus at 2.5 ml L-1 significantly increased the plant height, the number of leaves and the leaf content of chlorophyll recorded (29.56 cm, 8.33 and 58.43%) respectively. Moreover, it is recorded early the flowering date (130 days), and the highest flowering mean is (2.12 inflorescence/plant) and the highest period of the remained flowers on the plant and the vase life (10 and 8 days) respectively. The effects of both Humus and Izomen were similar. In addition to the highest mean of their interaction at 2.5 ml L -1for all the studied traits.

scholarly journals Budidaya Organik Kunyit pada Kluster Biofarmaka Kabupaten Karanganyar

2018 ◽  
Vol 33 (1) ◽  
pp. 34
Author(s):  
Samanhudi Samanhudi ◽  
Ahmad Yunus ◽  
Bambang Pujiasmanto
Keyword(s):  
Medicinal Plants ◽  
Plant Height ◽  
Dry Weight ◽  
Chicken Manure ◽  
Leaf Number ◽  
Fresh Weight ◽  
Organic Cultivation ◽  
Potential Development ◽  
Number Of Leaves ◽  
Cultivation Techniques

Potential development of medicinal plants in Karanganyar is very large, because this area is famous as a center of medicinal plants such as ginger, turmeric, kencur, and temulawak. In the development of medicinal plants, the approach of organic cultivation is one of the alternatives that can be done to achieve the business. Therefore the application of technology to society about organic farming on Biopharmaca Cluster of Karanganyar was conducted with the aim to apply organic cultivation techniques that have resulted from previous studies, so it can be applied by the community to increase income and welfare. This application of technology to society activity is held in Sambirejo, Jumantono, Karanganyar. The research was conducted from March to October 2016. The results showed that the application of chicken manure affects the number of leaves, number of tillers, and the fresh weight of turmeric rhizome. The addition of manure (chicken, goat, cow) can increase all variables of planting growth which include plant height, number of leaf, number of tillers, fresh weight of plant, dry weight of plant, and fresh weight of rhizomes. Giving three types of manure (chicken, goat, cow) with mycorrhizal dose treatment there is no intraction to some growth observation variables. Mycorrhizal treatment with a dose of 10 g/plant can increase the number of tillers in turmeric. Overall the application of mycorrhizal at various doses (5, 10, and 15 g/plant) can increase plant height, leaf number, number of tillers, and fresh weight of turmeric rhizome.

scholarly journals Initial growth of coffee (Coffea arabica L. var) castillo in the coffee zone of Nariño

2019 ◽  
Vol 36 (E) ◽  
pp. 124-137
Author(s):  
Hernando Criollo E. ◽  
Johanna Muñoz B. ◽  
Jorge Checa B. ◽  
Wilmer Noguera R.
Keyword(s):  
Plant Height ◽  
Statistical Design ◽  
Climatic Conditions ◽  
Initial Growth ◽  
Area Index ◽  
Physiological Variables ◽  
Physiological Processes ◽  
Number Of Leaves ◽  
La Florida ◽  
Coffee Cultivation

The importance of coffee cultivation in Nariño is reflected in the fact that 64% of its municipalities grow coffee. The ruggedness of its Andean topography provides great diversity in terms of climatic conditions, which, in one way or another, affect the behavior of coffee in all its physiological processes. Therefore, this study sought to identify the variation in the growth processes and production processes in the different coffee areas of this department, including the coffee-growing municipalities Sandoná, Consacá, La Florida and La Unión in the Department of Nariño, using experimental lots located at different altitude ranges (B <1600msnm; M between 1600 and 1800msnm and A >1800msnm). The statistical design used for each municipality was Random Complete Blocks with three treatments and sixteen repetitions. The recorded climatic variables included photosynthetically active radiation, ambient temperature, precipitation and relative humidity, and the evaluated physiological variables were plant height, number of leaves, basal stem diameter, number of primary branches, number of secondary branches, length of primary branches, number of knots per branch and leaf area index. The variable plant height was statistically higher in the upper zone (A) in the municipalities La Florida (79.95 cm) and Consacá (64.31cm); in La Florida, the number of branches and the LAI were higher in the upper zone plants, while the diameter of the stems was higher in the middle zone. In the other municipalities, these variables were not affected by the altitude.

scholarly journals THE GROWTH RATE OF CELERY (Apium graveolens L.) AT VARIOUS COMPOSITIONS OF ORGANIC AND SYNTHETIC FERTILIZER

2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Ghani Hendrika ◽  
Arifah Rahayu ◽  
Yanyan Mulyaningsih
Keyword(s):  
Plant Height ◽  
Dry Weight ◽  
Apium Graveolens ◽  
Fresh Weight ◽  
Higher Plant ◽  
Root Dry Weight ◽  
Synthetic Fertilizer ◽  
K Fertilizer ◽  
Compost Plant ◽  
Number Of Leaves

This study was aimed at assessing the growth and production of celery plants grown with various compositions of N,P and K fertilizer and compost. The study was done at the Trial Farm of Faculty of Agriculture, Djuanda University, Bogor fiom September to November 2015. A completely randomized design with two factors was used. The factors consisted of compost rate and N,P and K fertilizer rate. Compost was given in four levels, namely no compost (0% R), 26.3% gcompost/plant (50% R), 52.5 g compost/plant (100% R), and 78.7 g compost/plant (150% R). N, P and K fertilizer was given in five levels, namely no fertilizer (0% R), 4 g Urea, 0.3 g SP-36, 0.2 g KCl (25% R), 0.9 g Urea, 0.6 g SP-36, 0.4 g KCI (50% R), 1.3 g Urea, 0.8 g SP-36, 0.6 g KCl (75% R), and 1.7 g Urea, 1.1 g SP-36, 0.8 g KCl (100% R). All fertilizers were administered gradually at the time of planting and 2 weeks after planting. Three replicates were allocated into each treatment making up 60 experimental units. Results showed that celery plants given synthetic fertilizer at 100% R had higher plant height, number of leaves, number of seedlings, harvest fresh weight (g), saleable fresh weight (g), root biomass (g), and root dry weight (g) than those treated with no fertilizer (0% R). Plants treated with 150% compost had higher plant height, number of leaves, harvest fresh weight (g), saleable fresh weight (g), root length (cm), and root dry weight (g) than those treated with no fertilizer (0% R). Thus the best celery growth and production in this study was obtained on plant 150% R compost   and 100% R synthetic fertilizer nourished.Key words: celery, compost, N, P, K fertilizer, harvest flesh weight

scholarly journals Line×tester analysis in lilium×formolongi: identification of superior parents for growth and flowering traits

2019 ◽  
Vol 17 (1) ◽  
pp. 175-187
Author(s):  
R Rai ◽  
J Shrestha ◽  
JH Kim
Keyword(s):  
Plant Height ◽  
Gene Action ◽  
Block Design ◽  
Leaf Length ◽  
Stem Diameter ◽  
Leaf Width ◽  
Days To Flowering ◽  
Flower Diameter ◽  
Number Of Leaves ◽  
Almost All

An experiment was carried out using eight double cross F1s (DCF1s) as lines and two testers to obtain sixteen Line ×Tester hybrids for the evaluation of major growth and flowering traits thereby to understand the breeding potentiality of the parental lines. The performance of growth and flowering traits of all twenty-six genotypes were evaluated in a randomized complete block design (RCBD) with three replications. The analysis of variance (ANOVA) showed all the genotypes were significantly different for all agro-morphological traits under study. The estimated general combining ability (GCA) effects showed that parent 5(P5), were superior for plant height, stem diameter, number of leaves, leaf length, days to flowering and attitude of floral axis followed by parent 2(P2) for leaf length, leaf width, days to flowering and attitude of floral axis and parent7 (P7) for number of flower, flower diameter, bud length and attitude for floral axis. Likewise; tester 1 found to be best combiner with significant GCA effect for almost all growth and flowering traits (except number of leaves). The plant height, leaf width, number of flower and attitude of floral axis showed prevailing additive gene action while stem diameter, number of leaves, leaf length, days to flowering, flower diameter and bud length indicated predominance of dominance gene action. We can conclude that parent P5, parent P2 and parent P7 can be used as good mother lines and the tester 1, as good donor for the seed production. SAARC J. Agri., 17(1): 175-187 (2019)

Growth and yield response of Broccoli to vermicompost and farmyard manure

2020 ◽  
Vol 25 (2) ◽  
pp. 2107-2113
Author(s):  
H. E. Rabbee ◽  
N. J. Methela ◽  
B. Hossain ◽  
M. R. I. Suhel
Keyword(s):  
Plant Height ◽  
Agricultural Research ◽  
Block Design ◽  
Farmyard Manure ◽  
Leaf Length ◽  
Research Field ◽  
Growth And Yield ◽  
Yield Response ◽  
Treated Plant ◽  
Number Of Leaves

The present experiment was carried out at Agricultural Research field, Noakahali Science and Technology University, Noakhali, Bangladesh during the period from September 2018 to February 2019 to find out the effects of Vermicompost and Farmyard manure growth and yield of Broccoli. The single factor experiment was carried out by Randomized Complete Block Design (RCBD) with three replications. Three treatments viz., T0= Control, T1= Vermicompost and T2= Farm Yard Manure as well as Centeuro variety were used. Data were recorded from different stages of plant growth on plant height at different days after transplanting, number of leaves/plant, leaf length, leaf diameter, plant spread, 50% curd initiation days, 50% curd maturation days, curd diameter, Marketable curd weight, Net curd weight and Yield/plot. All the recorded parameters were statistically significant among the treatments. The tallest plant (43.67cm) can be recorded from T1 (vermicompost) whereas lower plant height (38.10cm) was notified from control (T0). The maximum number of leaves (16.03) recorded from vermicompost treated plant where minimum from control (T0; 13.28). Highest leaf length (40.67cm), leaf diameter (16.22cm), plant spread (47.91cmü), early curd initiation (73.22 days), early curd maturation (89.72 days), curd diameter (16.16cm), marketable curd weight (452.67g), net curd weight (361.43g) and yield/plot (3.94kg) was found from vermicompost treated plant is compared with Farmyard manure whereas lowest data recorded from control. Observing the results it can be stated that using of vermicompost treated plants gave better growth and yield contributing characters of Broccoli in contemporary with other treatments.

Sign in / Sign up

Export Citation Format

Share Document