scholarly journals Research of Microstructure of Molybden Doped Weldings of Oil and Gas Pipelines

2021 ◽  
Vol 29 (4) ◽  
pp. 274-279
Author(s):  
Iveta Pandova ◽  
Miroslav Rimar ◽  
Valery Makarenko ◽  
Yuri Vinnikov ◽  
Andrey Mangura ◽  
...  
Keyword(s):  
Weld Metal ◽  
Crack Formation ◽  
Oil And Gas ◽  
Laboratory Equipment ◽  
Plastic Properties ◽  
Alloyed Element ◽  
Metallic Inclusions ◽  
Technological Developments ◽  
Scientific Technical

Abstract Still existing scientific, technical and technological developments to improve the quality of welded joints of metal pipe structures contain contradictions and uncertainty about the effects of alloying elements, such as molybdenum, mechanical and visco-plastic properties, as well as metallographic component joints. All this indicates the need for a systematic study of these problems for the development of rational metallurgical and technological measures to significantly improve the technological and corrosion-mechanical properties of weld metal. Metallographic studies, using laboratory equipment with high identifying ability, found that the doping of weld metal with molybdenum in the amount of 0.2-0.4% causes fragmentation of ferrite-pearlite structure, including carbides Mn and Fe, and also reduces the number and size of non-metallic inclusions – sulfides, oxides and silicates. Moreover, non-metallic inclusions have a dispersed appearance, which promotes plasticization of the structure, which directly increases the viscous-plastic characteristics and resistance of the metal joints to crack formation. Based on the results of metallographic research, the optimum content in the weld metal of the alloyed element – molybdenum, which is 0.2-0.4%, is determined.

ABOUT NECESSITY OF MATHEMATICAL MODELING OF THE BUSINESS PROCESS OF COST ESTIMATE CALCULATIONS IN THE CONSTRUCTION OF OIL AND GAS FACILITIES

2017 ◽  
pp. 139-145
Author(s):  
R. I. Hamidullin ◽  
L. B. Senkevich
Keyword(s):  
Mathematical Modeling ◽  
Quality Assessment ◽  
Business Process ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Construction Organizations ◽  
The Cost ◽  
Cost Of Construction

A study of the quality of the development of estimate documentation on the cost of construction at all stages of the implementation of large projects in the oil and gas industry is conducted. The main problems that arise in construction organizations are indicated. The analysis of the choice of the perfect methodology of mathematical modeling of the investigated business process for improving the activity of budget calculations, conducting quality assessment of estimates and criteria for automation of design estimates is performed.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

scholarly journals Manufacturing and development of a bolted GFRP flange joint for oil and gas applications

2021 ◽  
pp. 095440542198951
Author(s):  
Muhsin Aljuboury ◽  
Md Jahir Rizvi ◽  
Stephen Grove ◽  
Richard Cullen
Keyword(s):  
Pressure Vessel ◽  
Oil And Gas ◽  
Polyester Resin ◽  
High Strength ◽  
Adhesively Bonded ◽  
Acceptable Quality ◽  
Composite Pipe ◽  
And Performance ◽  
Composite Pipes

The goal of this experimental study is to manufacture a bolted GFRP flange connection for composite pipes with high strength and performance. A mould was designed and manufactured, which ensures the quality of the composite materials and controls its surface grade. Based on the ASME Boiler and Pressure Vessel Code, Section X, this GFRP flange was fabricated using biaxial glass fibre braid and polyester resin in a vacuum infusion process. In addition, many experiments were carried out using another mould made of glass to solve process-related issues. Moreover, an investigation was conducted to compare the drilling of the GFRP flange using two types of tools; an Erbauer diamond tile drill bit and a Brad & Spur K10 drill. Six GFRP flanges were manufactured to reach the final product with acceptable quality and performance. The flange was adhesively bonded to a composite pipe after chamfering the end of the pipe. Another type of commercially-available composite flange was used to close the other end of the pipe. Finally, blind flanges were used to close both ends, making the pressure vessel that will be tested under the range of the bolt load and internal pressure.

Very High Cycle Fatigue Behavior and Life Prediction of a Low Strength Weld Metal at Moderate Temperature

2011 ◽  
Author(s):  
Ming-Liang Zhu ◽  
Fu-Zhen Xuan ◽  
Zhengdong Wang
Keyword(s):  
Crack Initiation ◽  
Weld Metal ◽  
Room Temperature ◽  
Fatigue Behavior ◽  
Fatigue Properties ◽  
Dissimilar Welding ◽  
Initiation Mechanism ◽  
Metallic Inclusions ◽  
Low Strength ◽  
Very High

The fatigue properties of a low strength weld metal in a dissimilar welding joint in high cycle and very high cycle regimes were investigated by fully reversed axial tests in air at room temperature and 370°C. A clear duplex S-N curve existed as a result of the transition of fatigue failure mode from surface-induced failure to internal-induced failure at 370°C, while the S-N curve was continuously decreased at room temperature. A new model was successfully proposed to predict fatigue life, and interpret the crack initiation modes transition from surface inclusion to interior inclusion. It was concluded that cracks were initiated by competition among non-metallic inclusions, welding pores and discontinuous microstructures in high cycle regime. While in the very high cycle regime, non-metallic inclusions were the dominant crack initiation mechanism which depended on stress level, inclusion size as well as inclusion depth.

ACHIMOV REGIONAL MODEL AS A BUSINESS TOOL FOR FORMING A PORTFOLIO OF NEW OPTIONS FOR GEOLOGICAL EXPLORATION IN WESTERN SIBERIA

2020 ◽  
pp. 10-15
Author(s):  
A.A. Timirgalin ◽  
M.G. Butorina ◽  
N.O. Novikov ◽  
G.V. Volkov ◽  
I.R. Mukminov ◽  
...  
Keyword(s):  
Western Siberia ◽  
Oil And Gas ◽  
Direct Analysis ◽  
Regional Assessment ◽  
Resource Base ◽  
Poor Knowledge ◽  
Development Indicators ◽  
Gas Potential ◽  
Data Generalization

The resource base of Western Siberia needs to be replenished to maintain the current development indicators. The reserves associated with the classic structural traps were diagnosed and mapped for the main horizons in Western Siberia. Replenishment of the resource base at the expense of such reserves is ineffective due to the fact that undiscovered traps of these types are thin, or lie at great depths, which ultimately negatively affects the quality of the resource base and the economic efficiency of their involvement in development. The driver of the growth and replenishment of the resource base under current conditions is the Achimov deposits, which are ubiquitous in this area at depths of 2500–3500 m and are genetically deep-water deposits of fans. The advantage of involving these deposits in development is often associated with the confinement to existing assets, where production is carried out from above and below-lying geological objects, the complexity is associated with the lithological type of traps, which is not diagnosed by direct analysis of seismic materials, as well as the extremely poor knowledge of the deposits over the area. Considering that the variability of properties over the area is a distinctive feature of Achimov deposits, the factor of poor knowledge by drilling significantly complicates the understanding of the potential of the deposits. In order to identify and assess the most promising areas for involvement in the development of the Achimov deposits, in PJSC Gazprom Neft the work “Regional assessment and zonal study of the prospects for oil and gas potential of the Achimov formation in the Western Siberia” was carried out. The goal and objectives is to form a reliable tool for searching and forecasting potential options using the generated regional maps of criteria (various characteristic properties and their combinations) built on the basis of data generalization throughout Western Siberia.

scholarly journals Engineering Properties of Concrete with Waste Recycled Plastic: A Review

2018 ◽  
Vol 10 (11) ◽  
pp. 3875 ◽  
Author(s):  
Adewumi Babafemi ◽  
Branko Šavija ◽  
Suvash Paul ◽  
Vivi Anggraini
Keyword(s):  
Surface Shape ◽  
Engineering Properties ◽  
Plastic Properties ◽  
Waste Plastic ◽  
Durability Properties ◽  
Composite Product ◽  
Pre Treatment ◽  
Recycled Waste ◽  
Moisture Resistant

The abundance of waste plastic is a major issue for the sustainability of the environment as plastic pollutes rivers, land, and oceans. However, the versatile behavior of plastic (it is lightweight, flexible, strong, moisture-resistant, and cheap) can make it a replacement for or alternative to many existing composite materials like concrete. Over the past few decades, many researchers have used waste plastic as a replacement for aggregates in concrete. This paper presents a comprehensive review of the engineering properties of waste recycled plastic. It is divided into three sections, along with an introduction and conclusion. The influence of recycled waste plastics on the fresh properties of concrete is discussed first, followed by its influence on the mechanical and durability properties of concrete. Current experimental results have shown that the mechanical and durability properties of concrete are altered due to the inclusion of plastic. However, such concrete still fulfills the requirements of many engineering applications. This review also advocates further study of possible pre-treatment of waste plastic properties for the modification of its surface, shape, and size in order to improve the quality of the composite product and make its use more widespread.

scholarly journals Defining features in the kinetics of sodium carbonate-bicarbonate solution carbonization and the quality of the resulting sodium bicarbonate crystals

2021 ◽  
Vol 4 (10(112)) ◽  
pp. 38-44
Author(s):  
Mykola Porokhnia ◽  
Musii Tseitlin ◽  
Svitlana Bukhkalo ◽  
Vladimir Panasenko ◽  
Tetiana Novozhylova
Keyword(s):  
Carbon Dioxide ◽  
Sodium Bicarbonate ◽  
Sodium Carbonate ◽  
Diffusion Resistance ◽  
Crystal Formation ◽  
Gas Velocity ◽  
Laboratory Equipment ◽  
Gas Consumption ◽  
Kinetics Of

This paper reports a study into the influence of temperature and gas consumption on the carbonization kinetics (saturation with carbon dioxide) of sodium carbonate-bicarbonate solution. The study also examined the quality and speed of crystal formation in this process. This research is predetermined by the environmental problems faced by modern enterprises that produce purified sodium bicarbonate – an insufficient degree of carbonization and, as a result, excessive air pollution with carbon dioxide, which did not participate in the reaction during the process. This study addresses these particular issues. As a result of using specialized laboratory equipment, it was found that an increase in the absorbent temperature from 79 to 85 °C leads to a decrease in the maximum degree of carbonization of the solution from 64 to 59 %. In contrast, the quality of the resulting sodium bicarbonate crystals improves but only in the range from 79 to 82 °C. With a further increase in temperature, the quality stabilizes. It is shown that the carbonization rate increases with increasing specific consumption of the absorbent (carbon dioxide) and is characterized by a negative correlation with the value of oversaturation of the absorbent in terms of NaНCO3. The quality of sodium bicarbonate crystals decreases with increasing gas velocity. Thus, it was reasonable to assume that the established dependence of the kinetics of carbonization of Na2CO3 and NaНCO3 solution on the gas velocity in the apparatus is explained by the inhibition of СО2 absorption, which is caused by the diffusion resistance of sodium bicarbonate crystallization. To improve the quality of crystals and the productivity of carbonization by reducing the supersaturation in terms of NaНCO3, it is recommended to introduce a seed crystal in the zone of binding of crystals in the carbonization columns.

scholarly journals The Connection Between the Nervous System and Machines: Commentary

10.2196/16344 ◽  
2019 ◽  
Vol 21 (11) ◽  
pp. e16344 ◽  
Author(s):  
Giacomo Valle
Keyword(s):  
Neural Interfaces ◽  
Machine Learning Techniques ◽  
Brain Machine Interfaces ◽  
Motor Disabilities ◽  
Neural Modulation ◽  
Learning Techniques ◽  
Technological Developments ◽  
Machine Interface ◽  
And Robotics

Decades of technological developments have populated the field of brain-machine interfaces and neuroprosthetics with several replacement strategies, neural modulation treatments, and rehabilitation techniques to improve the quality of life for patients affected by sensory and motor disabilities. This field is now quickly expanding thanks to advances in neural interfaces, machine learning techniques, and robotics. Despite many clinical successes, and multiple innovations in animal models, brain-machine interfaces remain mainly confined to sophisticated laboratory environments indicating a necessary step forward in the used technology. Interestingly, Elon Musk and Neuralink have recently presented a new brain-machine interface platform with thousands of channels, fast implantation, and advanced signal processing. Here, how their work takes part in the context of the restoration of sensory-motor functions through neuroprostheses is commented.

scholarly journals Sistem Informasi Pariwisata Berbasis Website Pada Taman Nasional Gunung Ciremai Jawa Barat

2020 ◽  
Vol 6 (1) ◽  
pp. 19-32
Author(s):  
Sagita Utarki ◽  
Eva Argarini Pratama ◽  
Corie Mei Hellyana
Keyword(s):  
Oil And Gas ◽  
Tourist Attractions ◽  
Interview Method ◽  
Tourism Sector ◽  
Technological Developments ◽  
Computer Based ◽  
The Government ◽  
Oil And Gas Sector ◽  
Collection Methods ◽  
New System

Abstract: Tourism sector in the country is one of the mainstay of foreign exchange earners for the country, especially in the non oil and gas sector, all efforts to attract tourists both archipelago and overseas continue to be done. One of the government's efforts to increase the flow of domestic and foreign tourists is to make improvements and arrangement of tourist attractions. In addition, by promoting. Therefore required a system that can facilitate the management of tourism in data processing, and facilitate members or tourists in obtaining information. Technological developments are increasing, then from the problems proposed a change in the old system into a new system with computer-based website technology. The method used in the development of this software uses Model Waterfall. Data collection methods that the authors use to collect the data needed in the writing of this research are: observation, interview method, and literature method. Through a computer connected to the internet network users can search and get various information, anywhere and anytime by accessing the website. With this system, is expected to overcome the various needs of users to obtain information and help the government to increase local revenue.Keywords: Information Systems, Tourism, Website, WaterfallAbstrak: Sektor pariwisata di tanah air merupakan salah satu andalan penghasil devisa bagi negara khususnya pada sektor non migas, segala upaya untuk menarik wisatawan baik nusantara maupun mancanegara terus dilakukan. Salah satu upaya pemerintah untuk meningkatkan arus wisatawan nusantara dan mancanegara adalah dengan melakukan pembenahan dan penataan objek wisata. Selain itu juga dengan melakukan promosi. Maka dari itu dibutuhkan sistem yang dapat mempermudah pengelola wisata dalam mengolah data, serta mempermudah anggota atau wisatawan dalam memperoleh informasi. Perkembangan teknologi yang semakin meningkat, maka dari permasalahan tersebut diusulkan adanya perubahan sistem lama kedalam sistem yang baru dengan teknologi komputer berbasis website. Metode yang digunakan pada pengembangan perangkat lunak ini menggunakan Model Waterfall. Metode pengumpulan data yang digunakan untuk mengumpulkan data-data yang diperlukan dalam penelitian ini yaitu: observasi, metode wawancara, dan metode pustaka. Melalui komputer yang terkoneksi dengan jaringan internet user dapat mencari dan mendapatkan berbagai informasi, dimana saja dan kapan saja dengan mengakses website. Dengan adanya sistem ini, diharapkan mampu mengatasi berbagai kebutuhan user untuk memperoleh informasi serta membantu pemerintah meningkatkan pendapatan daerah.Kata kunci: Sistem Informasi, Pariwisata, Website, Waterfall

Sign in / Sign up

Export Citation Format

Share Document