Temperature induced friction increase in friction test and forming demonstrator for sheet metal forming
High process stability is needed in sheet metal forming industry. This can be achieved by predicting and controlling the transient process and temperature variation, especially at start of production. In this connection, the temperature induced friction changing plays a significant role because it leads to product failures. The handling of the transient friction effects is currently done reactively, based on the individual experience of the machine operators. In future, those transient effects need to be controlled. This paper shows initially an analysis of the temperature induced friction increase in a well-known and proven flat strip drawing test. Different tribological systems were tested at tool temperatures between 20 and 80 °C. The temperature increase results in a higher friction of up to 77 %. Several influences on friction increase will be presented. These friction influences were verified afterwards with a heated forming demonstrator under laboratory conditions.