scholarly journals A Multi-Terminal HVdc Grid Topology Proposal for Offshore Wind Farms

2020 ◽  
Vol 10 (5) ◽  
pp. 1833
Author(s):  
Ali Raza ◽  
Muhammad Younis ◽  
Yuchao Liu ◽  
Ali Altalbe ◽  
Kumars Rouzbehi ◽  
...  
Keyword(s):  
High Voltage ◽  
Wind Farm ◽  
Wind Farms ◽  
Offshore Wind ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Offshore Platforms ◽  
Offshore Wind Farms ◽  
Dc Fault ◽  
Grid Side

Although various topologies of multi-terminal high voltage direct current (MT-HVdc) transmission systems are available in the literature, most of them are prone to loss of flexibility, reliability, stability, and redundancy in the events of grid contingencies. In this research, two new wind farms and substation ring topology (2WF-SSRT) are designed and proposed to address the aforementioned shortcomings. The objective of this paper is to investigate MT-HVdc grid topologies for integrating large offshore wind farms with an emphasis on power loss in the event of a dc grid fault or mainland alternating current (ac)grid abnormality. Standards and control of voltage source converter (VSC) based MT-HVdc grids are defined and discussed. High voltage dc switch-gear and dc circuit topologies are appraised based on the necessity of dc cables, HVdc circuit breakers, and extra offshore platforms. In this paper, the proposed topology is analyzed and compared with the formers for number and ratings of offshore substations, dc breakers, ultra-fast mechanical actuators, dc circuits, cost, flexibility, utilization, and redundancy of HVdc links. Coordinated operation of various topologies is assessed and compared with respect to the designed control scheme via a developed EMTDC/PSCAD simulation platform considering three fault scenarios: dc fault on transmission link connecting the wind farm to mainland power converters, dc fault within substation ring of VSC-HVdc stations, and ultimate disconnection of grid side VSC station. Results show that 2WF-SSRT is a promising topology for future MT-HVdc grids.

scholarly journals High Voltage DC Transmission Systems for Offshore Wind Farms with Different Topologies

2019 ◽  
Vol 8 (11) ◽  
pp. 2354-2363
Keyword(s):  
High Voltage ◽  
Large Scale ◽  
Wind Farms ◽  
Offshore Wind ◽  
Voltage Source ◽  
Future Research ◽  
Voltage Source Converter ◽  
Offshore Wind Farms ◽  
Multi Level ◽  
Level Converter

Theoretical review of various topologies of high voltage DC links in application to off shore wind forms has been studied and analysed. In addition to that, various types of high voltage DC links such as back to back, two terminal, multi-terminal systems has been covered under this study. The Line-Commutated Converters, Voltage Source Converter, Modular Multi-Level Converter as well as some of advanced hybrid high voltage DC topologies in application to off shore wind forms has been reviewed. This study covers complication arising from large-scale wind power generation. The review paper also points out the scope of future research in high voltage DC converters.

Simulated Onshore-Fault Ride through of Offshore Wind Farms Connected through VSC HVDC

2008 ◽  
Vol 32 (2) ◽  
pp. 103-113 ◽  
Author(s):  
A. Arulampalam ◽  
G. Ramtharan ◽  
N. Caliao ◽  
J.B. Ekanayake ◽  
N. Jenkins
Keyword(s):  
Wind Farm ◽  
Reactive Power ◽  
Wind Farms ◽  
Offshore Wind ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Offshore Wind Farm ◽  
Offshore Wind Farms ◽  
Grid Connection ◽  
Fault Ride Through

Effective Onshore-Fault Ride Through was demonstrated by simulation for a Fixed Speed Induction Generator (FSIG) offshore wind farm connected through a Voltage Source Converter HVDC link. When a terrestrial grid fault occurs, power through the onshore converter reduces and the DC link voltage increases. A control system was then used to block the offshore converter. The offshore AC network voltage was reduced to achieve rapid power rejection. Reactive power at the onshore converter was controlled to support the AC network voltage according to the GB Grid Code requirements. Two cases, a 200 ms terrestrial fault and a 50% retained voltage fault of duration 710 ms, at the grid connection point were studied. The simulation results show that power blocking at the offshore converter was effective and the DC link voltage was controlled.

scholarly journals Current Source Converter Based Offshore Wind Farm: Configuration and Control

2021 ◽  
Author(s):  
Miteshkumar Nandlal Popat
Keyword(s):  
Wind Farm ◽  
Current Source ◽  
Wind Farms ◽  
Offshore Wind ◽  
Grid Integration ◽  
Offshore Wind Farm ◽  
Offshore Wind Farms ◽  
Control Scheme ◽  
Current Source Converter ◽  
Grid Side

Recently, offshore wind farms have emerged as the most promising sector in the global renewable energy industry. The main reasons for the rapid development of offshore wind farms includes much better wind resources and smaller environmental impact (e.g., audible noise and visual effect). However, the current state of the offshore wind power presents economic challenges significantly greater than onshore. In this thesis, a novel interconnecting method for permanent magnet synchronous generator (PMSG)-based offshore wind farm is proposed, where cascaded pulse-width modulated (PWM) current-source converters (CSCs) are employed on both generator- and grid-side. With the converters in cascade to achieve high operating voltages, the proposed method eliminates the need for bulky and very costly offshore converter substation which is usually employed in voltage source converter (VSC) high voltage DC (HVDC)-based counterparts. Related research in terms of control schemes and grid integration are carried out to adapt the proposed cascaded CSC-based offshore wind farm configuration. The large distance between generator- and grid-side CSC in the proposed wind farm configuration addresses significant challenges for the system control. In order to overcome the problem, a novel decoupled control scheme is developed. The active and reactive power control on the grid-side converters are achieved without any exchange of information from the generator-side controller. Therefore, the long distance communication links between the generator- and grid-side converters are eliminated and both controllers are completely decoupled. At the same time, the maximum power tracking control is achieved for the generator-side converters that enable full utilization of the wind energy. Considering inconsistent wind speed at each turbine, a coordinated control scheme is proposed for the cascaded CSC-based offshore wind farm. In proposed control strategy, the wind farm supervisory control (WFSC) is developed to generate the optimized dc-link current control. This enables all the turbines to independently track their own MPPT even with inconsistent wind speed at each turbine. Grid integration issues, especially the fault ride-through (FRT) capability for the cascaded CSC-based offshore wind farm are addressed. Challenges in implementing existing FRT methods to the proposed offshore wind farm are identified. Based on this, a new FRT strategy using inherent short circuit operating capability of the CSC is developed. Moreover, the mitigation strategy is developed to ensure the continuous operation of the cascaded CSC-based offshore wind farm when one or more turbines fail to operate. Simulation and experimental verification for various objectives are provided throughout the thesis. The results validate the proposed solutions for the main challenges of the cascaded current source converter based offshore wind farm.

Technology of Offshore Wind Turbines and Farms and Novel Multilevel Converter-Based HVDC Systems for Their Grid Connections

2002 ◽  
Vol 26 (6) ◽  
pp. 383-395 ◽  
Author(s):  
Vassilios G. Agelidis ◽  
Christos Mademlis
Keyword(s):  
Wind Turbines ◽  
Wind Farms ◽  
Offshore Wind ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Multilevel Converter ◽  
Multilevel Converters ◽  
Offshore Wind Farms ◽  
Offshore Wind Turbines ◽  
Hvdc System

The technology associated with offshore wind farms is discussed in detail. First, the various offshore wind turbines are reviewed and the factors influencing their characteristics are outlined in comparison with their onshore counterparts. This overview serves as a basis for the discussion that follows regarding the possible electrical connection within the farm, and between the farm and the grid. Voltage-source converter-based HV DC connection is compared with HVAC connection. Finally, a novel multilevel converter-based HVDC system, based on flying capacitor multilevel converters is proposed, as a possible interface between the farm and the grid.

scholarly journals Investigating the Converter-Driven Stability of an Offshore HVDC System

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2341
Author(s):  
Matthias Quester ◽  
Fisnik Loku ◽  
Otmane El Azzati ◽  
Leonel Noris ◽  
Yongtao Yang ◽  
...  
Keyword(s):  
Wind Farm ◽  
Short Circuit ◽  
Impedance Measurement ◽  
Wind Farms ◽  
Offshore Wind ◽  
Voltage Source ◽  
Response Analysis ◽  
Offshore Wind Farms ◽  
The North ◽  
Ac Transmission

Offshore wind farms are increasingly built in the North Sea and the number of HVDC systems transmitting the wind power to shore increases as well. To connect offshore wind farms to adjacent AC transmission systems, onshore and offshore modular multilevel converters transform the transmitted power from AC to DC and vice versa. Additionally, modern wind farms mainly use wind turbines connected to the offshore point of common coupling via voltage source converters. However, converters and their control systems can cause unwanted interactions, referred to as converter-driven stability problems. The resulting instabilities can be predicted by applying an impedance-based analysis in the frequency domain. Considering that the converter models and system data are often confidential and cannot be exchanged in real systems, this paper proposes an enhanced impedance measurement method suitable for black-box applications to investigate the interactions. A frequency response analysis identifies coupling currents depending on the control system. The currents are subsequently added to the impedance models to achieve higher accuracy. The proposed method is applied to assess an offshore HVDC system’s converter-driven stability, using impedance measurements of laboratory converters and a wind turbine converter controller replica. The results show that the onshore modular multilevel converter interacts with AC grids of moderate short-circuit ratios. However, no interactions are identified between the offshore converter and the connected wind farm.

Sign in / Sign up

Export Citation Format

Share Document