scholarly journals Large Eddy Simulation of Film Cooling Involving Compound Angle Hole with Bulk Flow Pulsation

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7659
Author(s):  
Seung-Il Baek ◽  
Joon Ahn
Keyword(s):  
Experimental Data ◽  
Film Cooling ◽  
Orientation Angle ◽  
Flow Pulsation ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Injection Angle ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Compound Angle

The effects of pulsations in the main flow on film cooling from a cylindrical hole with a spanwise injection angle (orientation angle) are analyzed using numerical methods. The hole is located on a flat plate with a 35° inclined injection angle, and the compound angle denotes the orientation and inclination angles. The film cooling flow fields for the sinusoidal flow pulsation of 36 Hz from a cylindrical hole with 0° and 30° orientation angles at the time-averaged blowing ratio of M = 0.5 are simulated via large eddy simulation (LES). The CFD results are validated using the experimental data and compared to the Reynolds-averaged Navier–Stokes (RANS) and URANS results. The results reveal that if the pulsation frequency goes from 0 to 36 Hz, the adiabatic film cooling effectiveness decreases regardless of the compound angle; however, the film cooling for the 30° orientation angle exhibits better performance than that for a simple angle (0°). Moreover, if 36 Hz pulsation is applied, the film cooling effectiveness obtained by unsteady RANS exhibits a large deviation from the experimental data, unlike the LES results. The credibility of the LES results relative to the experimental data is demonstrated by comparing the time-averaged η and the phase-averaged temperature contours. The LES results demonstrate that LES can more accurately predict η than the experimental data; in contrast, URANS results are highly overpredicted around the centerline of the coolant spreading. Thus, LES results are more consistent with the experimental results for the time- and phase-averaged temperature contours than the URANS results.

scholarly journals Large Eddy Simulation of Film Cooling Involving Compound Angle Holes: Comparative Study of LES and RANS

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 198
Author(s):  
Seung Il Baek ◽  
Joon Ahn
Keyword(s):  
Large Eddy Simulation ◽  
Film Cooling ◽  
Orientation Angle ◽  
Turbulence Models ◽  
Film Cooling Effectiveness ◽  
Injection Angle ◽  
Blowing Ratio ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Compound Angle

A large eddy simulation (LES) was performed for film cooling in the gas turbine blade involving spanwise injection angles (orientation angles). For a streamwise coolant injection angle (inclination angle) of 35°, the effects of the orientation angle were compared considering a simple angle of 0° and 30°. Two ratios of the coolant to main flow mass flux (blowing ratio) of 0.5 and 1.0 were considered and the experimental conditions of Jung and Lee (2000) were adopted for the geometry and flow conditions. Moreover, a Reynolds averaged Navier–Stokes simulation (RANS) was performed to understand the characteristics of the turbulence models compared to those in the LES and experiments. In the RANS, three turbulence models were compared, namely, the realizable k-ε, k-ω shear stress transport, and Reynolds stress models. The temperature field and flow fields predicted through the RANS were similar to those obtained through the experiment and LES. Nevertheless, at a simple angle, the point at which the counter-rotating vortex pair (CRVP) collided on the wall and rose was different from that in the experiment and LES. Under the compound angle, the point at which the CRVP changed to a single vortex was different from that in the LES. The adiabatic film cooling effectiveness could not be accurately determined through the RANS but was well reflected by the LES, even under the compound angle. The reattachment of the injectant at a blowing ratio of 1.0 was better predicted by the RANS at the compound angle than at the simple angle. The temperature fluctuation was predicted to decrease slightly when the injectant was supplied at a compound angle.

scholarly journals Large Eddy Simulation of Film Cooling with Bulk Flow Pulsation: Comparative Study of LES and RANS

2020 ◽  
Vol 10 (23) ◽  
pp. 8553
Author(s):  
Seung Il Baek ◽  
Joon Ahn
Keyword(s):  
Experimental Data ◽  
Large Eddy Simulation ◽  
Film Cooling ◽  
Streamwise Velocity ◽  
Bulk Flow ◽  
Flow Pulsation ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Eddy Simulation ◽  
Large Eddy

The effects of bulk flow pulsations on film cooling in gas turbine blades were investigated by conducting large eddy simulation (LES) and Reynolds-averaged Navier–Stokes simulation (RANS). The film cooling flow fields under 32 Hz pulsation in the mainstream from a cylindrical hole inclined 35° to a flat plate at the average blowing ratio of M = 0.5 were numerically simulated. The LES results were compared to the experimental data of Seo, Lee, and Ligrani (1998) and Jung, Lee, and Ligrani (2001). The credibility of the LES results relative to the experimental data was demonstrated through a comparison of the time-averaged adiabatic film cooling effectiveness, time- and phase-averaged temperature contours, Q-criterion contours, time-averaged velocity profiles, and time- and phase-averaged Urms profiles with the corresponding RANS results. The adiabatic film cooling effectiveness predicted using LES agreed well with the experimental data, whereas RANS highly overpredicted the centerline effectiveness. RANS could not properly predict the injectant topology change in the streamwise normal plane, but LES reproduced it properly. In the case of the injectant trajectory, which greatly influences film cooling effectiveness, RANS could not properly predict the changes in the streamwise velocity peak due to flow pulsation, but they were predicted well with LES. RANS greatly underpredicted the streamwise velocity fluctuations, which determine the mixing of main flow and injectant, whereas LES prediction was close to the experimental data.

Large Eddy Simulation of Axial and Compound Angle Holes With Varying Hole Length-to-Diameter Ratio

2017 ◽  
Author(s):  
Weihong Li ◽  
Wei Shi ◽  
Xueying Li ◽  
Jing Ren ◽  
Hongde Jiang
Keyword(s):  
Large Eddy Simulation ◽  
Film Cooling ◽  
Vortex Structures ◽  
Diameter Ratio ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Compound Angle ◽  
Length To Diameter Ratio

The effect of hole length to diameter ratio on flat plate film cooling effectiveness and flow structures of axial and compound angle hole is investigated by large eddy simulation (LES). Film cooling simulations are performed for three blowing ratios (M) ranging from 0.4 to 1.2, three hole length-to-diameter ratios (L/D) from 0.5 to 5 and two compound angle (β: 0°, 45°). The prediction accuracy is validated by the reported hydrodynamic data and present film effectiveness data measured by pressure sensitive paint (PSP). Results indicate that discrete hole with L = 0.5 show highest film cooling effectiveness regardless of compound angle. Round hole generally shows an increasing trend as L increases from 2 to 5, while compound angle hole shows a complex trend concerning with blowing ratios and length to diameter ratios. This is associated with the fact that length-to-diameter ratio influences the in-tube flow behavior, formation of Kelvin-Helmholtz (K-H) structures, and development of single asymmetric main vortex (SAMV). Scalar field transportation features are investigated to clarify how different vortex structures affect the temperature distribution and the film cooling effectiveness. It is also demonstrated that the counter rotating vortex pair (CRVP) which is observed in the time-averaged flow field of axial hole is originated in different vortex structures with varying blowing ratios and length to diameter ratios.

On the Flow Structures and Adiabatic Film Effectiveness for Simple and Compound Angle Hole With Varied Length-to-Diameter Ratio by Large Eddy Simulation and Pressure-Sensitive Paint Techniques

2017 ◽  
Vol 139 (12) ◽  
Author(s):  
Weihong Li ◽  
Wei Shi ◽  
Xueying Li ◽  
Jing Ren ◽  
Hongde Jiang
Keyword(s):  
Film Cooling ◽  
Vortex Structures ◽  
Diameter Ratio ◽  
Pressure Sensitive Paint ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Eddy Simulation ◽  
Pressure Sensitive ◽  
Large Eddy ◽  
Compound Angle

The effects of hole length-to-diameter ratio and compound angle on flat plate film cooling effectiveness are investigated from an experimental and numerical view. Film cooling effectiveness measurements are performed for seven blowing ratios (M) ranging from 0.3 to 2, five-hole length-to-diameter ratios (L/D) from 0.5 to 5, and two compound angles (β: 0 deg and 45 deg) using pressure-sensitive paint (PSP) technique. Results indicate that discrete holes with L = 0.5 and 1 show highest film cooling effectiveness regardless of compound angle. Round hole generally shows an increasing trend as L increases from 2 to 5, while compound angle hole shows a complex trend concerning with blowing ratios (BRs) and length-to-diameter ratios. Compound angle enhances film cooling effectiveness with high blowing ratios and length-to-diameter ratios. In a parallel effort, large eddy simulation (LES) approach is employed to solve the flow field and visualize vortex structures of intube and mainstream regions. It is demonstrated that the counter-rotating vortex pair (CRVP) which is observed in the time-averaged flow field is originated in different vortex structures with varying blowing ratios and length-to-diameter ratios. Scalar field transportation features are also investigated to clarify how different vortex structures affect the temperature distribution and the film cooling effectiveness.

Loss Predictions in the High-Pressure Film-Cooled Turbine Vane of the FACTOR Project by Mean of Wall-Modeled Large Eddy Simulation

2020 ◽  
Author(s):  
Mael Harnieh ◽  
Nicolas Odier ◽  
Jérôme Dombard ◽  
Florent Duchaine ◽  
Laurent Gicquel
Keyword(s):  
Spatial Distribution ◽  
Large Eddy Simulation ◽  
Film Cooling ◽  
Total Pressure ◽  
Mean Flow ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Turbine Vane

Abstract The use of numerical simulations to design and optimize turbine vane cooling requires precise prediction of the fluid mechanics and film cooling effectiveness. This results in the need to numerically identify and assess the various origins of the losses taking place in such systems and if possible in engine representative conditions. Large-Eddy Simulation (LES) has shown recently its ability to predict turbomachinery flows in well mastered academic cases such as compressor or turbine cascades. When it comes to industrial representative configurations, the geometrical complexities, high Reynolds and Mach numbers as well as boundary condition setup lead to an important increase of CPU cost of the simulations. To evaluate the capacity of LES to predict film cooling effectiveness as well as to investigate the loss generation mechanisms in a turbine vane in engine representative conditions, a wall-modeled LES of the FACTOR film-cooled nozzle is performed. After the comparison of integrated values to validate the operating point of the vanes, the mean flow structure is investigated. In the coolant film, a strong turbulent mixing process between coolant and hot flows is observed. As a result, the spatial distribution of time-averaged vane surface temperature is highly heterogeneous. Comparisons with the experiment show that the LES prediction fairly reproduces the spatial distribution of the adiabatic film effectiveness. The loss generation in the configuration is then investigated. To do so, two methodologies, i.e, performing balance of total pressure in the vanes wakes as mainly used in the literature and Second Law Analysis (SLA) are evaluated. Balance of total pressure without the contribution of thermal effects only highlights the losses generated by the wakes and secondary flows. To overcome this limitation, SLA is adopted by investigating loss maps. Thanks to this approach, mixing losses are shown to dominate in the coolant film while aerodynamic losses dominate in the coolant pipe region.

Assessment of Large Eddy Simulation Predictive Capability for Compound Angle Round Film Holes

2015 ◽  
Author(s):  
Gregory Rodebaugh ◽  
Zachary Stratton ◽  
Gregory Laskowski ◽  
Michael Benson
Keyword(s):  
Large Eddy Simulation ◽  
Film Cooling ◽  
Density Ratio ◽  
Predictive Ability ◽  
Validation Data ◽  
Injection Angle ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Inflow Turbulence ◽  
Compound Angle

Film cooling holes with a compound angle are commonly used on high pressure turbine components in lieu of axial holes to improve effectiveness or as a result of manufacturing constraints. Whereas large eddy simulation (LES) of axial holes is becoming more common place, assessment of LES predictive ability for compound angle hole has been limited. For this study, the selected compound angle round (CAR) hole configuration has a 30 degree injection angle, a 45 degree compound angle, and a density ratio of 1.5. The geometry, flow conditions, and experimental adiabatic effectiveness validation data are from McClintic et al. [28]. The low free stream Mach number of the experiment puts the flow in the incompressible regime. Two LES solvers are evaluated, Fluent and FDL3Di, on structured meshes with a range of blowing ratios simulated for plenum, inline coolant crossflow, and counter coolant crossflow feed holes. When a steady inlet profile is used for the main flow, LES agreement with the data is poor. The inclusion of a resolved turbulent boundary layer significantly improves the predictive quality for both solvers; consequently, resolved inflow turbulence is a required aspect for CAR hole LES. The remaining differences between the simulations and IR data are partly attributed to the steady coolant inlet profiles used for the counter and inline cross feeds.

Investigation of Film Cooling Effectiveness of Full-Coverage Inclined Multihole Walls With Different Hole Arrangements

2003 ◽  
Author(s):  
Yuzhen Lin ◽  
Bo Song ◽  
Bin Li ◽  
Gaoen Liu ◽  
Zhiyong Wu
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Film Cooling ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Blowing Ratio ◽  
Full Coverage ◽  
Inclination Angles ◽  
Combustor Liner ◽  
Compound Angle

An experimental and numerical investigation of adiabatic film cooling effectiveness was conducted on four full-coverage inclined multihole walls with different hole arrangements. The hole geometrical patterns and the test conditions were chosen to be representative of film cooling designs for modern aeroengine combustor liners. The four hole arrangements were grouped into two types based on lateral hole pitch ( P ) and streamwise row spacing ( S ). One type included two test plates which had the same S and P (S/P = 2) and compound angle (β = 0 deg) but different hole inclination angles ( α ) (30 and 150 deg ). The other type included two test plates which had the same S and P (but S/P = 1) and inclination angle (α = 30 deg) but different compound angles (0 deg and 50 deg). Heat-mass transfer analogy method was employed to investigate the adiabatic film cooling effectiveness of these multihole walls with typical blowing ratios for aeroengine combustors. The numerical simulation was performed to characterize the flowfield and temperature distribution, aiming to further understand the film cooling mechanisms. The experimental results indicated that blowing ratio within the range from 1 to 4 had negligible influence on adiabatic film cooling effectiveness (η) in the case of concurrent coolant injection while hole arrangement had large effect on η. But the blowing ratio within the range from 1 to 4 had large effect on the film cooling effectiveness for the counterflow film cooling scheme. The numerical results were compared with experimental data and fairly good agreement was obtained. The numerical simulation revealed the flow structure, particularly exhibiting significant influence of the interaction between mainstream flow and coolant jets on η. With validation by experimental data, film cooling numerical simulation seems quite helpful in selecting optimum multihole arrangement for modern combustor liner design.

LES Study of the Effects of Oscillations in the Main Flow on Film Cooling

2020 ◽  
Author(s):  
Seung Il Baek ◽  
Joon Ahn
Keyword(s):  
Experimental Data ◽  
Film Cooling ◽  
Velocity Profiles ◽  
Main Flow ◽  
Experimental Results ◽  
Navier Stokes ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Eddy Simulation ◽  
Sinusoidal Oscillations

Abstract The effects of sinusoidal oscillations in the main flow on film cooling in the gas turbine were investigated by Large Eddy Simulation (LES). The film cooling flow fields for the sinusoidal oscillation of 32 Hz in the mainstream from a cylindrical hole inclined by 35° to a flat plate at average blowing ratio of M = 0.5 were numerically simulated. The LES results were compared to the experimental data from Seo, Lee and Ligrani (1998), Jung, Lee and Ligrani (2001) and Reynolds-Averaged Navier-Stokes (RANS) results. The experimental results showed that if the oscillation frequency in the main flow was increased, the adiabatic film cooling effectiveness was decreased. The credibility of the LES results relative to the experimental data was demonstrated by the comparison of time-averaged adiabatic film cooling effectiveness, time and phase-averaged temperature contours, contours of Q-criterion, time-averaged velocity profiles, and time and phase-averaged Urms profiles with the RANS results. The adiabatic film cooling effectiveness by LES model showed a good match to the experimental data, while RANS results highly over-predict the centerline effectiveness. Also, the LES results showed more consistent with the experimental data for the time-averaged and phase-averaged temperature contours, time-averaged velocity profiles and time and phase-averaged Urms profiles than the RANS results. RANS did not predict the peak generated by the jet penetration exactly and Urms profiles obtained by RANS approach was much smaller compared to the experimental results. Paper will discuss these results in detail.

Sign in / Sign up

Export Citation Format

Share Document