scholarly journals Additive Manufacturing of Titanium-Based Implants with Metal-Based Antimicrobial Agents

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 453
Author(s):  
Thywill Cephas Dzogbewu ◽  
Willie Bouwer du Preez
Keyword(s):  
Additive Manufacturing ◽  
Medical Devices ◽  
Bacterial Resistance ◽  
Antimicrobial Agents ◽  
Antibacterial Properties ◽  
Surface Coatings ◽  
Thin Coatings ◽  
Powder Bed ◽  
Fluid Environment ◽  
Alloy Metal

Due to increasing bacterial resistance to antibiotics, surface coatings of medical devices with antimicrobial agents have come to the fore. These surface coatings on medical devices were basically thin coatings that delaminated from the medical devices due to the fluid environment and the biomechanical activities associated with in-service implants. The conventional methods of manufacturing have been used to alloy metal-based antimicrobial (MBA) agents such as Cu with Ti6Al4V to enhance its antibacterial properties but failed to produce intricate shapes. Additive manufacturing technology, such as laser powder bed fusion (LPBF), could be used to produce the Ti6Al4V–xCu alloy with intricate shapes to enhance osseointegration, but have not been successful for texturing the surfaces of the Ti6Al4V–xCu samples at the nanoscale.

Multi-material model for the simulation of powder bed fusion additive manufacturing

2021 ◽  
Vol 194 ◽  
pp. 110415
Author(s):  
Vera E. Küng ◽  
Robert Scherr ◽  
Matthias Markl ◽  
Carolin Körner
Keyword(s):  
Additive Manufacturing ◽  
Material Model ◽  
Powder Bed Fusion ◽  
Powder Bed

scholarly journals A STRUCTURED APPROACH TO REDUCE DESIGN ITERATIONS IN ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 231-240
Author(s):  
Laura Wirths ◽  
Matthias Bleckmann ◽  
Kristin Paetzold
Keyword(s):  
Additive Manufacturing ◽  
Spare Parts ◽  
Design Guidelines ◽  
Final Part ◽  
Layer By Layer ◽  
Powder Bed ◽  
Batch Sizes ◽  
Manufacturing Technologies ◽  
Structured Approach ◽  
Design Freedom

AbstractAdditive Manufacturing technologies are based on a layer-by-layer build-up. This offers the possibility to design complex geometries or to integrate functionalities in the part. Nevertheless, limitations given by the manufacturing process apply to the geometric design freedom. These limitations are often unknown due to a lack of knowledge of the cause-effect relationships of the process. Currently, this leads to many iterations until the final part fulfils its functionality. Particularly for small batch sizes, producing the part at the first attempt is very important. In this study, a structured approach to reduce the design iterations is presented. Therefore, the cause-effect relationships are systematically established and analysed in detail. Based on this knowledge, design guidelines can be derived. These guidelines consider process limitations and help to reduce the iterations for the final part production. In order to illustrate the approach, the spare parts production via laser powder bed fusion is used as an example.

Sign in / Sign up

Export Citation Format

Share Document