scholarly journals Effect of Ferritic Morphology on Yield Strength of CGHAZ in a Low Carbon Mo-V-N-Ti-B Steel

Metals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1863
Author(s):  
Leping Wang ◽  
Huibing Fan ◽  
Genhao Shi ◽  
Qiuming Wang ◽  
Qingfeng Wang ◽  
...  
Keyword(s):  
Yield Strength ◽  
Heat Input ◽  
Low Carbon Steel ◽  
High Heat ◽  
Coarse Grained ◽  
Granular Bainite ◽  
Low Carbon ◽  
Fine Grained ◽  
High Heat Input ◽  
The Impact

For investigating the impact of ferritic morphology on yield strength (YS) of the high-heat-input welding induced coarse-grained heat-affected zone (CGHAZ) of a low carbon Mo-V-N-Ti-B steel, a group of particular welding heat inputs were designed to obtain different ferritic microstructures in CGHAZ. The tensile properties were estimated from typical samples with ferritic microstructures. The mixed microstructures dominated by the intragranular polygonal ferrite (IGPF), the intragranular acicular ferrite (IGAF), and the granular bainite (GB) were obtained at the heat inputs of 35, 65, 85 and 120 kJ/cm, respectively. When the main microstructure changed from IGPF to IGAF and GB, YS increased first and then decreased. The microstructure consisting mainly of IGAF possessed the maximum YS. As the main microstructure changed from IGPF to IGAF and GB, the contribution of grain refinement strengthening to YS was estimated to be elevated remarkably. This means the strength of CGHAZ in a low-carbon steel subjected to the high-heat-input welding could be enhanced by promoting the fine-grained AF and GB formation.

Effect of Heat Input on Toughness of Coarse-Grained Heat-Affected Zone of an Ultra Low Carbon Acicular Ferrite Steel

2012 ◽  
Vol 538-541 ◽  
pp. 2003-2008 ◽  
Author(s):  
Zheng Hai Xia ◽  
Xiang Liang Wan ◽  
Xue Li Tao ◽  
Kai Ming Wu
Keyword(s):  
Electron Microscopy ◽  
Impact Toughness ◽  
Heat Affected Zone ◽  
Heat Input ◽  
Acicular Ferrite ◽  
High Heat ◽  
Coarse Grained ◽  
Low Carbon ◽  
Ferrite Steel ◽  
The Impact

The effect of heat input on toughness of coarse-grained heat-affected zone of an ultra low carbon acicular ferrite steel were investigated when the welding was conducted with high heat input. Microstructural observations, energy dispersive X-ray spectroscopy analyses were conducted using optical microscopy, scanning electron microscopy and transmission electron microscopy, respectively. The microstructures of coarse-grained heat-affected zone consist of predominantly bainitic microstructure and a small proportion of acicular ferrite grains. The bainitic microstructures become coarsened with increasing heat input. The impact toughness of coarse-grained heat-affected zone remained at a higher level when the heat input ranged from 42 to 55 kJ/cm. It became not stable and dropped to a lower level when the heat input increased to 110150 kJ/cm. The enhancement in impact toughness was attributable to the MnS precipitation on the pre-formed Ti oxides as well as the formation of intragranular ferrite. When specimens were welded with higher heat input, the deterioration of impact toughness was caused by the coarsening of austenite grains.

Improvement of Weld Metal Toughness in High Heat Input Electro-Slag Welding of Low Carbon Steel

2009 ◽  
Vol 53 (3-4) ◽  
pp. R57-R63 ◽  
Author(s):  
Yasushi Kitani ◽  
Rinsei Ikeda ◽  
Moriaki Ono ◽  
Kenji Ikeuchi
Keyword(s):  
Carbon Steel ◽  
Weld Metal ◽  
Heat Input ◽  
Low Carbon Steel ◽  
High Heat ◽  
Low Carbon ◽  
High Heat Input

Study of Surface Melting of Pre-Plasma Sprayed WC-14%Co Low Carbon Steel

2012 ◽  
Vol 445 ◽  
pp. 697-701
Author(s):  
M. Heydarzadeh Sohi ◽  
S. Shahbazi ◽  
A. Halvaee
Keyword(s):  
Carbon Steel ◽  
Heat Input ◽  
Low Carbon Steel ◽  
High Heat ◽  
Surface Melting ◽  
Martensite Lath ◽  
Inert Gas ◽  
Low Carbon ◽  
High Heat Input ◽  
Plasma Sprayed

In this study tungsten inert gas (TIG) surface melting of pre- plasma sprayed WC-14%Co low carbon steel has been studied. Surface melting was performed under different heat inputs by using various TIG parameters including intensity and kind of current. Microstructure and microhardness of surface alloyed specimens were then studied. Eutectic structures containing tungsten-rich carbides were shaped in a matrix including martensite lath, when high heat input was used. Decreasing at heat input affected the microstructure of the alloyed layers, and high amount of faceted tungsten-rich carbides (Fe3W3C) were formed in fairly low heat input. Microhardness of melted layers highly improved in comparison with that of the substrate.

Effect of Heat Input on Impact Toughness of Coarse-Grained Heat-Affected Zone of a Nb-Ti Microalloyed Pipeline Steel

2012 ◽  
Vol 538-541 ◽  
pp. 2026-2031 ◽  
Author(s):  
Zhou Gao ◽  
Ran Wei ◽  
Kai Ming Wu
Keyword(s):  
Impact Toughness ◽  
Heat Affected Zone ◽  
Heat Input ◽  
Pipeline Steel ◽  
High Heat ◽  
Coarse Grained ◽  
Bainitic Microstructure ◽  
Homogenous Distribution ◽  
High Heat Input ◽  
The Impact

The effect of varying heat inputs (20, 100, 200 kJ/cm) on the microstructures and toughness of the simulated coarse-grained heat-affected zone of a Nb-Ti microalloyed pipeline steel were investigated utilizing optical and electron microscope. Results showed that the impact toughness of the coarse-grained heat-affected zone maintained a higher level at the heat input of 20 and 100 kJ/cm, whereas it dropped to a much lower level at the heat input of 200 kJ/cm. The good toughness was attributed to the grain refinement and the homogenous distribution of fine and elongated martensite/austenite constituents. The deterioration of toughness for high heat input simulated welding was mainly caused by the coarse bainitic microstructure and massive martensite/austenite constituents.

Effects of oxygen content on microstructure and impact toughness of high heat input flux-cored wire weld metals

2018 ◽  
Vol 115 (4) ◽  
pp. 410
Author(s):  
Fengyu Song ◽  
Yanmei Li ◽  
Ping Wang ◽  
Fuxian Zhu
Keyword(s):  
Grain Size ◽  
Impact Toughness ◽  
Weld Metal ◽  
Oxygen Content ◽  
Heat Input ◽  
High Heat ◽  
Cored Wire ◽  
Weld Metals ◽  
High Heat Input ◽  
The Impact

Three weld metals with different oxygen contents were developed. The influence of oxygen contents on the microstructure and impact toughness of weld metal was investigated through high heat input welding tests. The results showed that a large number of fine inclusions were formed and distributed randomly in the weld metal with oxygen content of 500 ppm under the heat input condition of 341 kJ/cm. Substantial cross interlocked acicular ferritic grains were induced to generate in the vicinity of the inclusions, primarily leading to the high impact toughness at low temperature for the weld metal. With the increase of oxygen content, the number of fine inclusions distributed in the weld metal increased and the grain size of intragranular acicular ferrites decreased, which enhanced the impact toughness of the weld metal. Nevertheless, a further increase of oxygen content would contribute to a great diminution of the austenitic grain size. Following that the fraction of grain boundary and the start temperature of transformation increased, which facilitated the abundant formation of pro-eutectoid ferrites and resulted in a deteriorative impact toughness of the weld metal.

Sign in / Sign up

Export Citation Format

Share Document