scholarly journals Potentiality of Azolla pinnata R. Br. for Phytoremediation of Polluted Freshwater with Crude Petroleum Oil

Separations ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 39
Author(s):  
Aya A. Mostafa ◽  
Ahmad K. Hegazy ◽  
Nermen H. Mohamed ◽  
Rehab M. Hafez ◽  
Ehab Azab ◽  
...  
Keyword(s):  
Aromatic Hydrocarbons ◽  
High Performance ◽  
Saturated Hydrocarbon ◽  
Cost Effective ◽  
Positive Control ◽  
Azolla Pinnata ◽  
Molecular Type ◽  
Crude Petroleum ◽  
Type Composition ◽  
Petroleum Oil

The pollution of freshwater resources with crude petroleum oil is a major environmental issue in oil-producing countries. As a result, the remediation of polluted aquatic ecosystems using eco-friendly and cost-effective technology is receiving increased global attention. In this study, the ability of Azolla pinnata R. Br. to remediate petroleum-polluted freshwater was assessed. The remediation potentiality was determined by evaluating the total petroleum hydrocarbon degradation percentage (TPH%) and changes in the molecular type composition of saturated and aromatic hydrocarbon fractions. TPH% was estimated gravimetrically, and changes in the molecular type composition of saturated and aromatic fractions were measured using gas chromatography and high-performance liquid chromatography, respectively. The results reveal that A. pinnata has the potential to phytoremediate freshwater polluted with low levels (up to 0.5 g/L) of petroleum hydrocarbons (PHs). After seven days of phytoremediation, the degradation rate of total PHs was 92% in the planted treatment compared with 38% in the unplanted positive control. The highest breakdown of PHs for the normal paraffinic saturated hydrocarbon fraction occurred in the presence of A. pinnata combined with Anabena azollaea (A-A), which showed a moderate degradation capacity toward total aromatic hydrocarbons (TAHs) and total polycyclic aromatic hydrocarbons (PAHs). The results indicate that A. pinnata effectively removed C18, a saturated PH, and acenaphthene (Ace), an aromatic PH. Therefore, this study suggests that A. pinnata is a useful tool for the remediation of freshwaters contaminated with low pollution levels of crude oil.

Klebseilla Oxytoca; An Efficient Pyrene-Degrading Bacterial Strain Isolated from Petroleum Contaminated Soil

2021 ◽  
Author(s):  
Abdulkhaleg M. Alfaify ◽  
Mushtaq Ahmad Mir ◽  
Sulaiman A. Alrumman
Keyword(s):  
Aromatic Hydrocarbons ◽  
Contaminated Soil ◽  
High Performance ◽  
Klebsiella Oxytoca ◽  
Cost Effective ◽  
Petroleum Processing ◽  
Gram Staining ◽  
16S Rna ◽  
Polycyclic Aromatic ◽  
Petroleum Contaminated Soil

Abstract Polycyclic aromatic hydrocarbons (PAHs) are the hazardous xenobiotic agents of oil production. One of the methods to eliminate hazardous compounds is bioremediation, which is the most efficient and cost-effective method to eliminate the harmful byproducts of crude petroleum processing. In this study, five pure bacterial isolates were isolated from petroleum-contaminated soil, four of which showed a robust growth on pyrene as a sole carbon source. Various methods viz mass spectroscopy, biochemical assays, and 16s RNA sequencing employed to identify the isolates ascertained the consistent identification of Klebsiella oxytoca by all three methods. Scanning electron microscopy and Gram staining further demonstrated the characterization of the K. oxytoca. High-performance liquid chromatography of the culture supernatant of K. oxytoca grown in pyrene containing media showed that the cells started utilizing pyrene from the 6th day onwards and by the 14th day of growth 3/4th of the pyrene was completely degraded. Genome search for the genes predicted to be involved in pyrene degradation using Kyoto Encyclopedia of Genes and Genomes (KEGG) confirmed their presence in the genome of K. oxytoca. These results suggest that K. oxtoca would be a suitable candidate for removing soil aromatic hydrocarbons.

scholarly journals Variations of Structural and Functional Traits of Azolla pinnata R. Br. in Response to Crude Oil Pollution in Arid Regions

2021 ◽  
Vol 13 (4) ◽  
pp. 2142
Author(s):  
Aya A. Mostafa ◽  
Rehab M. Hafez ◽  
Ahmad K. Hegazy ◽  
Azza M. Abd-El Fattah ◽  
Nermen H. Mohamed ◽  
...  
Keyword(s):  
Crude Oil ◽  
Functional Traits ◽  
Oil Pollution ◽  
Plant Cover ◽  
Carotenoid Content ◽  
Treatment Level ◽  
Azolla Pinnata ◽  
Crude Petroleum ◽  
Crude Oil Pollution ◽  
Petroleum Oil

In oil-producing countries, water pollution by crude petroleum oil frequently occurs and causes many environmental problems. This study aims to investigate the effect of crude petroleum oil on the growth and functional trails of the economically important freshwater plant Azolla pinnata R. Br. and to report on the plant’s resistance to this abiotic stress. Plants were raised in an open greenhouse experiment under different levels of crude oil pollution ranging from 0.5 to 2.0 g/L. Plant functional traits were monitored over a three-week period. Plant cover of A. pinnata was decreased with the increased levels of oil pollution. The total chlorophyll content decreased from 0.76 mg/g fresh weight under 2 g/L oil treatment after 21 days of growth. The chlorophyll a/b ratio exceeded the unity at crude oil treatments above 1 g/L, with values reaching 2.78 after seven days, while after 21 days, the ratio ranged from 1.14 to 1.31. The carotenoid content ranged from 0.17 mg/g in the control to 0.11 mg/g in the 2 g/L oil treatment. The carotenoid content varied over time in relation to DNA% damage, which increased from 3.63% in the control to 11.36% in the highest oil treatment level of 2 g/L. The crude oil stress caused severe damage in the frond tissues and chloroplast structure of A. pinnata, including a less compacted palisade, the malformation of the epidermis, the disintegration of parenchyma tissue, and the lysis and malformation of the chloroplasts. Since A. pinnata cannot withstand high concentrations of crude oil pollution, it is for use in the remediation of slightly polluted freshwaters up to 0.5 g/L.

Mineral/microfibrillated cellulose composite materials: High performance products, applications, and product forms

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 507-515 ◽  
Author(s):  
David Skuse ◽  
Mark Windebank ◽  
Tafadzwa Motsi ◽  
Guillaume Tellier
Keyword(s):  
Composite Materials ◽  
High Performance ◽  
Aqueous Suspension ◽  
Production Capacity ◽  
Cost Savings ◽  
Cost Effective ◽  
New Materials ◽  
Wet Strength ◽  
Product Forms ◽  
Cellulose Composite

When pulp and minerals are co-processed in aqueous suspension, the mineral acts as a grinding aid, facilitating the cost-effective production of fibrils. Furthermore, this processing allows the utilization of robust industrial milling equipment. There are 40000 dry metric tons of mineral/microfbrillated (MFC) cellulose composite production capacity in operation across three continents. These mineral/MFC products have been cleared by the FDA for use as a dry and wet strength agent in coated and uncoated food contact paper and paperboard applications. We have previously reported that use of these mineral/MFC composite materials in fiber-based applications allows generally improved wet and dry mechanical properties with concomitant opportunities for cost savings, property improvements, or grade developments and that the materials can be prepared using a range of fibers and minerals. Here, we: (1) report the development of new products that offer improved performance, (2) compare the performance of these new materials with that of a range of other nanocellulosic material types, (3) illustrate the performance of these new materials in reinforcement (paper and board) and viscosification applications, and (4) discuss product form requirements for different applications.

Parallel Computing for Tire Simulations

2011 ◽  
Vol 39 (3) ◽  
pp. 193-209 ◽  
Author(s):  
H. Surendranath ◽  
M. Dunbar
Keyword(s):  
High Performance ◽  
Effective Means ◽  
Cost Effective ◽  
Turnaround Time ◽  
Careful Consideration ◽  
Rolling Contact ◽  
Element Analysis ◽  
Parallel Solvers ◽  
Design Changes ◽  
Highly Nonlinear

Abstract Over the last few decades, finite element analysis has become an integral part of the overall tire design process. Engineers need to perform a number of different simulations to evaluate new designs and study the effect of proposed design changes. However, tires pose formidable simulation challenges due to the presence of highly nonlinear rubber compounds, embedded reinforcements, complex tread geometries, rolling contact, and large deformations. Accurate simulation requires careful consideration of these factors, resulting in the extensive turnaround time, often times prolonging the design cycle. Therefore, it is extremely critical to explore means to reduce the turnaround time while producing reliable results. Compute clusters have recently become a cost effective means to perform high performance computing (HPC). Distributed memory parallel solvers designed to take advantage of compute clusters have become increasingly popular. In this paper, we examine the use of HPC for various tire simulations and demonstrate how it can significantly reduce simulation turnaround time. Abaqus/Standard is used for routine tire simulations like footprint and steady state rolling. Abaqus/Explicit is used for transient rolling and hydroplaning simulations. The run times and scaling data corresponding to models of various sizes and complexity are presented.

Azo (Hydrazone) pigments: general principles

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert Christie
Keyword(s):  
High Performance ◽  
Metal Salt ◽  
Low Cost ◽  
Cost Effective ◽  
Precipitation Process ◽  
Ambient Temperatures ◽  
Technical Performance ◽  
Chemical Structures ◽  
General Chemical ◽  
Physical Form

Abstract This paper presents an overview of the general chemical principles underlying the structures, synthesis and technical performance of azo pigments, the dominant chemical class of industrial organic pigments in the yellow, orange, and red shade areas, both numerically and in terms of tonnage manufactured. A description of the most significant historical features in this group of pigments is provided, starting from the discovery of the chemistry on which azo colorants are based by Griess in the mid-nineteenth century, through the commercial introduction of the most important classical azo pigments in the early twentieth century, including products known as the Hansa Yellows, β-naphthol reds, including metal salt pigments, and the diarylide yellows and oranges, to the development in the 1950s and 1960s of two classes of azo pigments that exhibit high performance, disazo condensation pigments and benzimidazolone-based azo pigments. A feature that complicates the description of the chemical structures of azo pigments is that they exist in the solid state as the ketohydrazone rather than the hydroxyazo form, in which they have been traditionally been illustrated. Numerous structural studies conducted over the years on an extensive range of azo pigments have demonstrated this feature. In this text, they are referred to throughout as azo (hydrazone) pigments. Since a common synthetic procedure is used in the manufacture of virtually all azo (hydrazone) pigments, this is discussed in some detail, including practical aspects. The procedure brings together two organic components as the fundamental starting materials, a diazo component and a coupling component. An important reason for the dominance of azo (hydrazone) pigments is that they are highly cost-effective. The syntheses generally involve low cost, commodity organic starting materials and are carried out in water as the reaction solvent, which offers obvious economic and environmental advantages. The versatility of the approach means that an immense number of products may be prepared, so that they have been adapted structurally to meet the requirements of many applications. On an industrial scale, the processes are straightforward, making use of simple, multi-purpose chemical plant. Azo pigments may be produced in virtually quantitative yields and the processes are carried out at or below ambient temperatures, thus presenting low energy requirements. Finally, provided that careful control of the reaction conditions is maintained, azo pigments may be prepared directly by an aqueous precipitation process that can optimise physical form, with control of particle size distribution, crystalline structure, and surface character. The applications of azo pigments are outlined, with more detail reserved for subsequent papers on individual products.

scholarly journals Reduction of Polycyclic Aromatic Hydrocarbons (PAHs) in Sesame Oil Using Cellulosic Aerogel

Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 644
Author(s):  
Do-Yeong Kim ◽  
Boram Kim ◽  
Han-Seung Shin
Keyword(s):  
Polycyclic Aromatic Hydrocarbons ◽  
Aromatic Hydrocarbons ◽  
High Performance ◽  
Oil Quality ◽  
Acid Value ◽  
Quality Parameters ◽  
Sesame Oil ◽  
Miscanthus Sinensis ◽  
Polycyclic Aromatic ◽  
And Control

The effect of cellulosic aerogel treatments used for adsorption of four polycyclic aromatic hydrocarbons (PAHs)—benzo[a]anthracene, chrysene, benzo[b]fluoranthene, and benzo[a]pyrene [BaP])—generated during the manufacture of sesame oil was evaluated. In this study, eulalia (Miscanthus sinensis var. purpurascens)-based cellulosic aerogel (adsorbent) was prepared and used high performance liquid chromatography with fluorescence detection for determination of PAHs in sesame oil. In addition, changes in the sesame oil quality parameters (acid value, peroxide value, color, and fatty acid composition) following cellulosic aerogel treatment were also evaluated. The four PAHs and their total levels decreased in sesame oil samples roasted under different conditions (p < 0.05) following treatment with cellulosic aerogel. In particular, highly carcinogenic BaP was not detected after treatment with cellulosic aerogel. Moreover, there were no noticeable quality changes in the quality parameters between treated and control samples. It was concluded that eulalia-based cellulosic aerogel proved suitable for the reduction of PAHs from sesame oil and can be used as an eco-friendly adsorbent.

QuEChERS with ultrasound-assisted extraction combined with high-performance liquid chromatography for the determination of 16 polycyclic aromatic hydrocarbons in sediment

2021 ◽  
Author(s):  
Ling Wu ◽  
Qiurong He ◽  
Jing Zhang ◽  
Yongxin Li ◽  
Weiqing Yang ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Aromatic Hydrocarbons ◽  
High Performance ◽  
Ultrasound Assisted Extraction ◽  
Sediment Samples ◽  
Assisted Extraction ◽  
Polycyclic Aromatic ◽  
Ultrasound Assisted

Abstract Background Polycyclic aromatic hydrocarbons (PAHs) have attracted worldwide attention due to their carcinogenic, teratogenic and mutagenic effects, environmental persistence and bioaccumulation characteristics. Therefore, the sensitive, reliable and rapid detection of PAHs in sediment is of great importance. Objective To develop a high-performance liquid chromatography (HPLC) with fluorescence and ultraviolet detection after QuEChERS treatment for simultaneous determination of 16 U.S. Environmental Protection Agency priority PAHs in sediment samples. Methods The samples were ultrasonically extracted with acetone and then the supernatant was purified with a modified QuEChERS method. After centrifugation, the supernatant was injected into the HPLC system for analysis. The separation was accomplished on a ZORBAX Eclipse PAH column (150 × 4.6 mm, 3.5 μm) and the column temperature was set at 30 °C. The flow rate of the mobile phase consisting of water and acetonitrile in gradient elution mode was fixed at 0.9 mL/min. Detection was conducted on an ultraviolet detector and a fluorescence detector simultaneously. The qualitative analysis was based on retention time and the quantification was based on standard curves. Results Under the optimal conditions, this method showed good linearities in the range of 10–200 μg/L with correlation coefficients greater than 0.9993. The method had the limits of detection (LODs) ranging from 0.00108 to 0.314 ng/g. The mean recoveries ranged from 78.4 to 117% with the intra-day and inter-day relative standard deviations (RSDs) of 0.592–10.7 and 1.01–13.0%, respectively. The proposed method was successfully applied to the detection of 16 PAHs in sediment samples collected from the Funan River in Chengdu, China with the total contents of 431 to 2143 ng/g·dw. Conclusions The established method is simple, rapid, environment-friendly and cost- effective. It can be applied to the analysis of 16 PAHs in sediment samples. Highlights A method of QuEChERS with ultrasound-assisted extraction combined with HPLC has been established for the analysis of 16 PAHs in sediment samples and the proposed method has been successfully applied to the analysis PAHs in real sediment samples.

scholarly journals Mechanistic Studies of the Antiallergic Activity of Phyllanthus amarus Schum. & Thonn. and Its Compounds

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 695
Author(s):  
Nur Zahirah Abd Rani ◽  
Kok Wai Lam ◽  
Juriyati Jalil ◽  
Hazni Falina Mohamad ◽  
Mohd Shukri Mat Ali ◽  
...  
Keyword(s):  
High Performance ◽  
Binding Assay ◽  
Radioligand Binding ◽  
Positive Control ◽  
Phyllanthus Amarus ◽  
H1 Receptor ◽  
Antiallergic Activity ◽  
Ketotifen Fumarate ◽  
Antihistamine Activity ◽  
Basophilic Leukemia

Phyllanthus amarus Schum. & Thonn. (Phyllanthaceae) is a medicinal plant that is commonly used to treat diseases such as asthma, diabetes, and anemia. This study aimed to examine the antiallergic activity of P. amarus extract and its compounds. The antiallergic activity was determined by measuring the concentration of allergy markers release from rat basophilic leukemia (RBL-2H3) cells with ketotifen fumarate as the positive control. As a result, P. amarus did not stabilize mast cell degranulation but exhibited antihistamine activity. The antihistamine activity was evaluated by conducting a competition radioligand binding assay on the histamine 1 receptor (H1R). Four compounds were identified from the high performance liquid chromatography (HPLC) analysis which were phyllanthin (1), hypophyllanthin (2), niranthin (3), and corilagin (4). To gain insights into the binding interactions of the most active compound hypophyllanthin (2), molecular docking was conducted and found that hypophyllanthin (2) exhibited favorable binding in the H1R binding site. In conclusion, P. amarus and hypophyllanthin (2) could potentially exhibit antiallergic activity by preventing the activation of the H1 receptor.

Sign in / Sign up

Export Citation Format

Share Document