CONFORTO TÉRMICO NAS ESCOLAS DO CRATO - CE

2019 ◽  
Vol 21 (2) ◽  
pp. 948-961
Author(s):  
Thiago Felix De Lima ◽  
Juliana Maria Oliveira Silva
Keyword(s):  
School Environment ◽  
Low Cost ◽  
Initial Result ◽  
The Other ◽  
Measured Temperature ◽  
Human Comfort ◽  
Thermal Discomfort ◽  
De Se ◽  
Student Employees ◽  
The University

O trabalho tem como ação verificar se em algumas escolas do Município do Crato apresentam conforto/desconforto térmico para os alunos, professores e funcionários em períodos distintos do ano. O trabalho faz parte do projeto de extensão do Laboratório de Análise Geoambiental que visa também aproximar os alunos da Universidade com a escola, demonstrando que a extensão pode e deve produzir dados que podem auxiliar na melhoria das condições do ambiente onde atua. Foram selecionadas duas escolas e instalou-se três mini estações de baixo custo em três diferentes pontos, sendo o primeiro ponto instalado na sala de aula, um no pátio e outro na área externa, sendo mensurados a temperatura e a umidade de uma em uma hora. De acordo com Diagrama do Conforto Humano (INMET) foram feitos os cruzamentos dos dados a fim de se obter um resultado inicial do que ocorrem nas duas escolas no primeiro período do ano escolhido. Através dos resultados obtidos pela medição e entrevistas com alunos funcionários e professores, e de algumas observações, pode-se concluir que ocorrem em alguns horários situações de desconforto térmico, o que pode ser percebido também pelos alunos e professores quando responderam o questionário.Palavras-chave:Extensão.Pesquisa.Conforto térmico. Desconforto térmico. Ambiente escolar. ABSTRACTThe work has the effect of checking if some schools of the Municipality of Crato present some comfort / thermal discomfort for students, teachers and employees during different periods of the year. The work is part of the extension project of the Laboratory of Geoenvironmental Analysis that also aims to bring students from the University to the school, demonstrating that extension can and should produce data that can help improve the conditions of the environment where it operates. Two schools were selected and three low-cost mini-stations were installed in three different points, the first point being installed in the Geography classroom of each school, one in the courtyard and the other in the external area, being measured temperature and humidity one hour at a time. According to the Human Comfort Diagram, the data were cross-checked in order to obtain an initial result of what happens in the two schools in the first period of the year chosen. Through the results obtained by the measurement and interviews with student employees and teachers, and some observations, it can be concluded that at certain times situations of thermal discomfort occur, which can also be perceived by students and teachers when they answered the questionnaireKeywords:Extension. Search. Thermal comfort. Thermal discomfort. School environment.

scholarly journals VR Pedestrian Simulator Studies at Home: Comparing Google Cardboards to Simulators in the Lab and Reality

2021 ◽  
Vol 2 ◽  
Author(s):  
Philipp Maruhn
Keyword(s):  
Virtual Environments ◽  
Virtual Environment ◽  
Evaluation Method ◽  
Low Cost ◽  
The Other ◽  
Home Setting ◽  
Head Mounted Displays ◽  
Data Points ◽  
The University ◽  
At Home

Virtual Reality is commonly applied as a tool for analyzing pedestrian behavior in a safe and controllable environment. Most such studies use high-end hardware such as Cave Automatic Virtual Environments (CAVEs), although, more recently, consumer-grade head-mounted displays have also been used to present these virtual environments. The aim of this study is first of all to evaluate the suitability of a Google Cardboard as low-cost alternative, and then to test subjects in their home environment. Testing in a remote setting would ultimately allow more diverse subject samples to be recruited, while also facilitating experiments in different regions, for example, investigations of cultural differences. A total of 60 subjects (30 female and 30 male) were provided with a Google Cardboard. Half of the sample performed the experiment in a laboratory at the university, the other half at home without an experimenter present. The participants were instructed to install a mobile application to their smartphones, which guided them through the experiment, contained all the necessary questionnaires, and presented the virtual environment in conjunction with the Cardboard. In the virtual environment, the participants stood at the edge of a straight road, on which two vehicles approached with gaps of 1–5 s and at speeds of either 30 or 50 km/h. Participants were asked to press a button to indicate whether they considered the gap large enough to be able to cross safely. Gap acceptance and the time between the first vehicle passing and the button being pressed were recorded and compared with data taken from other simulators and from a real-world setting on a test track. A Bayesian approach was used to analyze the data. Overall, the results were similar to those obtained with the other simulators. The differences between the two Cardboard test conditions were marginal, but equivalence could not be demonstrated with the evaluation method used. It is worth mentioning, however, that in the home setting with no experimenter present, significantly more data points had to be treated or excluded from the analysis.

Spectraplot: A PC-based spectrum translation and display program

1988 ◽  
Vol 46 ◽  
pp. 918-919
Author(s):  
H. O. Colijn
Keyword(s):  
Low Cost ◽  
Transfer Program ◽  
File Transfer ◽  
Transfer Data ◽  
Error Checking ◽  
Data Files ◽  
The University

Many labs today wish to transfer data between their EDS systems and their existing PCs and minicomputers. Our lab has implemented SpectraPlot, a low- cost PC-based system to allow offline examination and plotting of spectra. We adopted this system in order to make more efficient use of our microscopes and EDS consoles, to provide hardcopy output for an older EDS system, and to allow students to access their data after leaving the university.As shown in Fig. 1, we have three EDS systems (one of which is located in another building) which can store data on 8 inch RT-11 floppy disks. We transfer data from these systems to a DEC MINC computer using “SneakerNet”, which consists of putting on a pair of sneakers and running down the hall. We then use the Hermit file transfer program to download the data files with error checking from the MINC to the PC.

Industrial Technology Graduates’ Acquired Skills and Competencies from the University

2019 ◽  
Vol 5 (3) ◽  
pp. 189
Author(s):  
Amado C Gequinto ◽  
Do Mads
Keyword(s):  
Social Media ◽  
Text Messaging ◽  
Global Market ◽  
The Other ◽  
Global Markets ◽  
Industrial Technology ◽  
The University ◽  
Descriptive Method

Skills and competencies are highly regarded in todays global market. Different agencies specifically those seeking for  technologists, technicians, and engineers, have stressed out that skills and competencies as major components  for individual workers.  This aimed to determine  the relevance and appropriateness of acquired skills and competencies by industrial technology graduates, and determine the extent of use of skills and competencies in the current employment. Review of related literatures and studies have been considered in the realization, understanding, analysis, and interpretation of this research exploration. A descriptive method of research was used with 78 graduates from 2015-2016 and 117 graduates from 2016-2017, who participated in the study survey process. The BatStateU Standardized Questionnaire was used to gather data. A brief interview and talk during the visit of alumni in the university was also considered, as well as the other means of social media like email, facebook, messenger, and text messaging.   Results show that skills and competecnices acquired by industrial technology graduates are all relevant and appropriate.  The study also found that there is some to great extent use of acquired skills and competencies to their current employment. The study implies that the acquired skills and competencies from the university significantly provided the graduates the opportunities ins the national and global markets and industries.

SAE 1039

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Cost ◽  
Manganese Content ◽  
Heat Treating ◽  
General Purpose ◽  
Carbon Steels ◽  
The Other ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAF 1039 steel can be used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose construction and engineering. Its manganese content is a little higher than some of the other standard carbon steels with comparable carbon levels; this gives it slightly higher hardenability and hardness. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-66. Producer or source: Carbon steel mills.

RECYCLED BRICK SOUNDPROOF TEST AS AN ALTERNATIVE SUSTAINABLE MATERIAL

2020 ◽  
Vol 13 (2) ◽  
pp. 44-54
Author(s):  
Hendrico Firzandy Latupeirissa ◽  
Gierlang Bhakti Putra ◽  
Niki Prastomo
Keyword(s):  
Waste Disposal ◽  
Sound Source ◽  
Building Material ◽  
Building Materials ◽  
Negative Impact ◽  
The Other ◽  
Human Comfort ◽  
Construction Waste ◽  
Coarse Grains ◽  
Made In

Brick debris that makes up the majority of construction waste has not received proper waste disposal in Indonesia. On the other hand, brick debris could be potentially reused as non-structural building materials to reduce its negative impact on the environment. This study aims to test the effectiveness of soundproofing on recycled brick debris. The soundproof test was carried out on brick debris in the form of fine and coarse grains. The simulation box is then used as a support for the brickwork material and then the box is exposed to a sound source with a certain level of noise that is considered disturbing human comfort. Noise level measurements are made in the outside and inside the box. These measurements are tabulated and then analyzed to see the success of the two aggregates in reducing noise. Basically, the brickwork material has succeeded in becoming a recycled building material that can absorb noise, although further research must be carried out to be able to state that this material is truly ready to be used as an alternative building material with good acoustic capabilities.

Using Low Temperature, Cost-effective and Green Methods to Carbon Nanohorn Synthesis

2019 ◽  
Vol 9 (2) ◽  
pp. 157-160
Author(s):  
Ali Hasani
Keyword(s):  
Laser Ablation ◽  
Melting Point ◽  
Palm Olein ◽  
Arc Discharge ◽  
Low Cost ◽  
The Other ◽  
High Yield ◽  
Reaction Field ◽  
Carbon Nanohorns ◽  
Graphite Rod

Background: Laser ablation method has high-yield and pure SWCNHs. On the other hand, arc discharge methods have low-cost production of SWCNHs. However, these techniques have more desirable features, they need special expertness to use high power laser or high current discharge that either of them produces very high temperature. As for the researches, the temperatures of these techniques are higher than 4727°C to vaporize the graphite. So, to become aware of the advantages of SWCNHs, it is necessary to find a new way to synthesize SWCNHs at a lower temperature. In other words, reaction field can be expandable at a moderate temperature. This paper reports a new way to synthesize SWCNHs at an extremely reduced temperature. Methods: According to this study, the role of N2 is the protection of the copper holder supporting the graphite rod by increasing heat transfer from the holder. After the current of 70 A was supplied to the system, the temperature of graphite rod was raised to 1600°C. It is obvious that this temperature is somehow higher than the melting point of palladium, 1555°C, and much lower than graphite melting point, 3497°C. Results: Based on the results, there are transitional precursors simultaneous with the SWCNHs. This composition can be created by distortion of the primary SWCNTs at the higher temperature. Subsequently, each SWCNTs have a tendency to be broken into individual horns. With increasing the concentration of the free horns, bud-like SWCNHs can be produced. Moreover, there are individual horns almost separated from the mass of single wall carbon nanohorns. This structure is not common in SWCNHs synthesized by the usual method such as arc discharge or laser ablation. Through these regular techniques, SWCNHs are synthesized as cumulative particles with diameters about 30-150 nm. Conclusion: A simple heating is needed for SWCNTs transformation to SWCNHs with the presence of palladium as catalyst. The well-thought-out mechanism for this transformation is that SWCNTs were initially changed to highly curled shape, and after that were formed into small independent horns. The other rout to synthesize SWCNHs is the pyrolysis of palm olein at 950°C with the assistance of zinc nitrate and ferrocene. Palm olein was used as a promising, bio-renewable and inexpensive carbon source for the production of carbon nanohorns.

scholarly journals The BabySaver: Design of a New Device for Neonatal Resuscitation at Birth with Intact Placental Circulation

Children ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 526
Author(s):  
James Ditai ◽  
Aisling Barry ◽  
Kathy Burgoine ◽  
Anthony K. Mbonye ◽  
Julius N. Wandabwa ◽  
...  
Keyword(s):  
Low Cost ◽  
Neonatal Resuscitation ◽  
Sub Saharan Africa ◽  
Skilled Birth Attendants ◽  
New Device ◽  
Birth Attendants ◽  
Premature Babies ◽  
Sub Saharan ◽  
The Uk ◽  
The University

The initial bedside care of premature babies with an intact cord has been shown to reduce mortality; there is evidence that resuscitation of term babies with an intact cord may also improve outcomes. This process has been facilitated by the development of bedside resuscitation surfaces. These new devices are unaffordable, however, in most of sub-Saharan Africa, where 42% of the world’s 2.4 million annual newborn deaths occur. This paper describes the rationale and design of BabySaver, an innovative low-cost mobile resuscitation unit, which was developed iteratively over five years in a collaboration between the Sanyu Africa Research Institute (SAfRI) in Uganda and the University of Liverpool in the UK. The final BabySaver design comprises two compartments; a tray to provide a firm resuscitation surface, and a base to store resuscitation equipment. The design was formed while considering contextual factors, using the views of individual women from the community served by the local hospitals, medical staff, and skilled birth attendants in both Uganda and the UK.

With Plenty of Elbow Room: Planning New and Upgraded Spaces for Library and Archives Conservation and Audiovisual Preservation

Collections ◽  
2021 ◽  
pp. 155019062098784
Author(s):  
Whitney Baker
Keyword(s):  
Planning Process ◽  
Lessons Learned ◽  
University Of Kansas ◽  
Special Collections ◽  
Student Employees ◽  
The University ◽  
Film And Video

In 2018, the University of Kansas (KU) Libraries upgraded from a tired, twenty-year-old basement space to a new, purpose-built conservation lab for library and archives collections. The new conservation lab, which is housed in the special collections and archives library, quadrupled available lab space for its conservators and fleet of student employees. The move afforded Conservation space in the same library as the most vulnerable collection materials. In addition, rooms in the special collections and archives library were repurposed for audiovisual (AV) preservation, creating two new spaces for film and video workflows and upgrading an existing small audio room. This paper will discuss the conservation and preservation lab construction literature and will serve as a practical exemplar of the challenges and successes of the planning process, including lessons learned and unexpected benefits.

scholarly journals A Local Oscillator Phase Compensation Technique for Ultra-Wideband Stepped-Frequency Continuous Wave Radar Based on a Low-Cost Software-Defined Radio

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 780
Author(s):  
Kazunori Takahashi ◽  
Takashi Miwa
Keyword(s):  
Software Defined Radio ◽  
Initial Phase ◽  
Continuous Wave ◽  
Low Cost ◽  
Local Oscillator ◽  
The Other ◽  
Ultra Wideband ◽  
Single Frequency ◽  
Wave Radar ◽  
Stepped Frequency

The paper discusses a way to configure a stepped-frequency continuous wave (SFCW) radar using a low-cost software-defined radio (SDR). The most of high-end SDRs offer multiple transmitter (TX) and receiver (RX) channels, one of which can be used as the reference channel for compensating the initial phases of TX and RX local oscillator (LO) signals. It is same as how commercial vector network analyzers (VNAs) compensate for the LO initial phase. These SDRs can thus acquire phase-coherent in-phase and quadrature (I/Q) data without additional components and an SFCW radar can be easily configured. On the other hand, low-cost SDRs typically have only one transmitter and receiver. Therefore, the LO initial phase has to be compensated and the phases of the received I/Q signals have to be retrieved, preferably without employing an additional receiver and components to retain the system low-cost and simple. The present paper illustrates that the difference between the phases of TX and RX LO signals varies when the LO frequency is changed because of the timing of the commencement of the mixing. The paper then proposes a technique to compensate for the LO initial phases using the internal RF loopback of the transceiver chip and to reconstruct a pulse, which requires two streaming: one for the device under test (DUT) channel and the other for the internal RF loopback channel. The effect of the LO initial phase and the proposed method for the compensation are demonstrated by experiments at a single frequency and sweeping frequency, respectively. The results show that the proposed method can compensate for the LO initial phases and ultra-wideband (UWB) pulses can be reconstructed correctly from the data sampled by a low-cost SDR.

scholarly journals Automated Residential Energy Audits Using a Smart WiFi Thermostat-Enabled Data Mining Approach

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2500
Author(s):  
Abdulrahman Alanezi ◽  
Kevin P. Hallinan ◽  
Kefan Huang
Keyword(s):  
Low Cost ◽  
Model Development ◽  
Cost Savings ◽  
Measured Temperature ◽  
Single Family ◽  
Furnace Efficiency ◽  
Heating And Cooling ◽  
Data Mining Approach ◽  
Energy Auditing ◽  
Energy Audits

Smart WiFi thermostats, when they first reached the market, were touted as a means for achieving substantial heating and cooling energy cost savings. These savings did not materialize until additional features, such as geofencing, were added. Today, average savings from these thermostats of 10–12% in heating and 15% in cooling for a single-family residence have been reported. This research aims to demonstrate additional potential benefit of these thermostats, namely as a potential instrument for conducting virtual energy audits on residences. In this study, archived smart WiFi thermostat measured temperature data in the form of a power spectrum, corresponding historical weather and energy consumption data, building geometry characteristics, and occupancy data were integrated in order to train a machine learning model to predict attic and wall R-Values, furnace efficiency, and air conditioning seasonal energy efficiency ratio (SEER), all of which were known for all residences in this study. The developed model was validated on residences not used for model development. Validation R-squared values of 0.9408, 0.9421, 0.9536, and 0.9053 for predicting attic and wall R-values, furnace efficiency, and AC SEER, respectively, were realized. This research demonstrates promise for low-cost data-based energy auditing of residences reliant upon smart WiFi thermostats.

Sign in / Sign up

Export Citation Format

Share Document