U-Patch Antenna for RFID and Wireless Applications

2011 ◽  
Vol 324 ◽  
pp. 434-436
Author(s):  
R. Abi Saad ◽  
Zeina Melhem ◽  
Chadi Nader ◽  
Youssef Zaatar ◽  
Doumit Zaouk
Keyword(s):  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Dual Band ◽  
Antenna Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Additional Layer ◽  
Quarter Wavelength ◽  
Frequency Identification

in this paper, we propose a new multi-band patch antenna structure for embedded RFID (Radio Frequency Identification) readers and wireless communications. The proposed antenna is a dual band microstrip patch antenna using U-slot geometry. The operating frequencies of the proposed antenna are chosen as 2.4 and 0.9 (GHz), obtained by optimizing the physical dimensions of the U-slot. Several parameters have been investigated using Ansoft Designer software. The antenna is fed through a quarter wavelength transformer for impedance matching. An additional layer of alumina is added above the surface of the conductors to increase the performance of the antenna.

Design and Development of Compact Microstrip Patch Antenna for Wireless Applications

2017 ◽  
Vol 6 (3) ◽  
pp. 1
Author(s):  
R. Nagendra ◽  
T. Venkateswarulu
Keyword(s):  
Patch Antenna ◽  
Impedance Matching ◽  
Characteristic Impedance ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Design And Development ◽  
Wireless Applications ◽  
Composite Patch ◽  
Microstrip Patch ◽  
Operating Band

In this paper, a novel dual band microstrip patch antenna based on composite patch antenna and radiating part. By selecting a suitable offset feed position, it is feasible to provide 50Ω characteristic impedance and thus making better impedance matching. The proposed antenna has been improved broader bandwidth by using RT Duroid substrate. The radiating part is plays a important role in creating a lower operating band (2.45 GHz) in addition to achieve miniaturization. The proposed antenna has to be fabricated with RT / Duroid substrate and dimensions of 19 × 22 × 0.8 mm. The measured -10 dB bandwidth of 200 MHz at 2.45 GHz and 990 MHz at 5.45 GHz, which is quite useful for Industrial, Scientific and Medical (ISM) and WLAN applications. 

A Rectangular Microstrip Patch Antenna for Dual Band Wireless Applications

2020 ◽  
Vol 13 (2) ◽  
pp. 212-218 ◽  
Author(s):  
Kabo O. Mabusha ◽  
Pradeep Kumar
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Center Frequency ◽  
Total Efficiency ◽  
Defected Ground Structure ◽  
Antenna Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Patch

Background: In this paper, the design of a dual-band microstrip patch antenna with operating frequencies of 2.16 GHz and 2.79 GHz is proposed. Methods: The proposed antenna design is based upon the defected ground structure and rectangular patch with corner cuts. The presented antenna structure is simulated and optimized using CST microwave studio software. Results: The antenna resonates at 2.16 GHz and 2.79 GHz. The bandwidth of the proposed antenna is 2.08 GHz-2.25 GHz at center frequency 2.16 GHz and is 2.7 GHz-2.87 GHz at center frequency 2.79 GHz. The optimized antenna model is fabricated and measured. The measured and simulated results are presented and discussed. The proposed antenna provides a maximum gain of 4.463 dB and the maximum directivity of 5.846 dBi. The maximum radiation efficiency and total efficiency of the antenna are 79.85% and 69.01%, respectively. Conclusion: The proposed antenna is suitable for dual-band wireless applications.

scholarly journals Compact Dual-Band Circularly Polarized Stacked Patch Antenna for Microwave-Radio-Frequency Identification Multiple-Input-Multiple-Output Application

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Enze Zhang ◽  
Andrea Michel ◽  
Paolo Nepa ◽  
Jinghui Qiu
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Circularly Polarized ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Frequency Identification ◽  
Stacked Patch Antenna

A compact, low-profile, two-port dual-band circularly polarized (CP) stacked patch antenna for radio-frequency identification (RFID) multiple-input-multiple-output (MIMO) readers is proposed, which employs the shared-aperture technique. The proposed antenna adopts a 1.524 mm thickness Rogers Ro4350b substrate with relative permittivity of 3.48. Two pairs of isolated ports are working at two microwave- (MW-) RFID bands (2.4–2.485 GHz and 5.725–5.875 GHz) with high port isolation of 25 dB and 30 dB, respectively. A shared metal slot layer is designed to separate two feeding structures of the lower band and upper band for port isolation enhancement as well as saving space. Corner-truncated square slot and patch configurations have been designed to obtain CP modes. In the lower and upper MW-RFID bands, the relative impedance bandwidths are 12.2% and 5.7%, and the maximum realized gains are higher than 7.3 dBic. Moreover, two-element configurations have been combined for an RFID MIMO system that occupies a dimension of 119 mm × 119 mm × 12.9 mm. The MIMO antenna performance of envelope correlation coefficient (ECC) is lower than 0.03, and diversity gain is close to 10 dB.

scholarly journals Dual-Band Monopole Antenna for RFID Applications

2019 ◽  
Vol 11 (2) ◽  
pp. 31 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Raed Abd-Alhameed ◽  
James Noras
Keyword(s):  
Radio Frequency Identification ◽  
Monopole Antenna ◽  
Dual Band ◽  
Rfid Technology ◽  
Antenna Structure ◽  
The Past ◽  
Frequency Identification ◽  
Rfid Applications ◽  
Significant Attention ◽  
Good Agreement

Over the past decade, radio-frequency identification (RFID) technology has attracted significant attention and become very popular in different applications, such as identification, management, and monitoring. In this study, a dual-band microstrip-fed monopole antenna has been introduced for RFID applications. The antenna is designed to work at the frequency ranges of 2.2–2.6 GHz and 5.3–6.8 GHz, covering 2.4/5.8 GHz RFID operation bands. The antenna structure is like a modified F-shaped radiator. It is printed on an FR-4 dielectric with an overall size of 38 × 45 × 1.6 mm3. Fundamental characteristics of the antenna in terms of return loss, Smith Chart, phase, radiation pattern, and antenna gain are investigated and good results are obtained. Simulations have been carried out using computer simulation technology (CST) software. A prototype of the antenna was fabricated and its characteristics were measured. The measured results show good agreement with simulations. The structure of the antenna is planar, simple to design and fabricate, easy to integrate with RF circuit, and suitable for use in RFID systems.

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

scholarly journals A Butterfly-Shaped Wideband Microstrip Patch Antenna for Wireless Communication

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Liling Sun ◽  
Maowei He ◽  
Jingtao Hu ◽  
Yunlong Zhu ◽  
Hanning Chen
Keyword(s):  
Wireless Communications ◽  
Wireless Communication ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Rfid Systems ◽  
Microstrip Patch ◽  
Frequency Identification

A novel butterfly-shaped patch antenna for wireless communication is introduced in this paper. The antenna is designed for wideband wireless communications and radio-frequency identification (RFID) systems. Two symmetrical quasi-circular arms and two symmetrical round holes are incorporated into the patch of a microstrip antenna to expand its bandwidth. The diameter and position of the circular slots are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by means of a prototype having a bandwidth of about 40.1%. The return loss of the butterfly-shaped antenna is greater than 10 dB between 4.15 and 6.36 GHz. The antenna can serve simultaneously most of the modern wireless communication standards.

Single-feed circularly polarized stacked patch antenna with small-frequency ratio for dual-band wireless applications

2015 ◽  
Vol 8 (8) ◽  
pp. 1207-1213 ◽  
Author(s):  
Sachin Kumar ◽  
Binod K. Kanaujia ◽  
Mukesh K. Khandelwal ◽  
A.K. Gautam
Keyword(s):  
Patch Antenna ◽  
Frequency Ratio ◽  
Axial Ratio ◽  
Dual Band ◽  
Radiation Characteristics ◽  
Small Frequency ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Good Agreement

A single-feed dual-band circularly polarized stacked microstrip patch antenna with a small-frequency ratio is presented. Two pair of orthogonal slits is cut on the lower circular patch for achieving circular polarization and truncated corner square patch is used as the upper parasitic element. The frequency ratio of the dual-band is 1.03. The 3 dB axial ratio bandwidth is 1.3% for the upper band and 1.1% for the lower band. Proposed structure is fabricated on the FR-4 epoxy substrate and fed by SMA connector. The measured results are in good agreement with the theoretical and simulated results. The antenna shows stable radiation characteristics in both bands of operation.

A Novel Dual-Band Tag Antenna for RFID Application

2013 ◽  
Vol 427-429 ◽  
pp. 1289-1292
Author(s):  
Yan Zhong Yu ◽  
Hua Nan Yang ◽  
Zhong Yi Huang
Keyword(s):  
Radio Frequency Identification ◽  
Rapid Development ◽  
High Gain ◽  
Dual Band ◽  
Dual Frequency ◽  
Rfid Tag ◽  
Microstrip Patch ◽  
Frequency Identification ◽  
Design Requirements ◽  
Simulation Results

With the rapid development of RFID (radio frequency identification) application, the design requirements of RFID tag antenna are also increasing. A design of dual-frequency or multi-frequency tag antenna has become fashionable. In the present paper, we design a dual-band RFID tag antenna, which consists of a bent microstrip patch and rectangular microstrip patch. The designed antenna is analyzed and optimized by HFSS13. Simulation results indicate that the tag antenna has the characteristics of double band, high gain, and good radiation pattern.

Sign in / Sign up

Export Citation Format

Share Document