scholarly journals MODELLING ON-FARM DIVERSIFICATION THROUGH PORTFOLIO OPTIMIZATION AND GOAL PROGRAMMING: A CASE STUDY FROM BOLIVIA

AGROFOR ◽  
2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Andrea MARKOS

Modern Portfolio Theory provides a theoretical framework for agricultural risk reduction. Powerful yet accessible tools have been developed to optimize scarce capital/labor allocation to increase returns and reduce correlated risks via diversification. Such tools are used to assess rural livelihood diversification induced by an incentive-based program for watershed conservation piloted between 2003 and 2011 in a context of rural poverty in Bolivia. The tools assembled and tested in this study may provide low-cost diagnostics to improve implementers’ understanding of risks and returns in a specific rural context. Comparing alternative portfolio frontiers may represent a useful and transformative tool to understand socio-ecological systems such as watersheds, facilitating regime shifts that benefit ecosystem services and livelihoods.

Author(s):  
Kristopher D. Staller

Abstract Cold temperature failures are often difficult to resolve, especially those at extreme low levels (< -40°C). Momentary application of chill spray can confirm the failure mode, but is impractical during photoemission microscopy (PEM), laser scanning microscopy (LSM), and multiple point microprobing. This paper will examine relatively low-cost cold temperature systems that can hold samples at steady state extreme low temperatures and describe a case study where a cold temperature stage was combined with LSM soft defect localization (SDL) to rapidly identify the cause of a complex cold temperature failure mechanism.


2021 ◽  
pp. 1-9
Author(s):  
Javier Carrillo-Reche ◽  
Adrian C. Newton ◽  
Richard S. Quilliam

Abstract A low-cost technique named ‘on-farm’ seed priming is increasingly being recognized as an effective approach to maximize crop establishment. It consists of anaerobically soaking seeds in water before sowing resulting in rapid and uniform germination, and enhanced seedling vigour. The extent of these benefits depends on the soaking time. The current determination of optimal soaking time by germination assays and mini-plot trials is resource-intensive, as it is species/genotype-specific. This study aimed to determine the potential of the seed respiration rate (an indicator of metabolic activity) and seed morphological changes during barley priming as predictors of the priming benefits and, thus, facilitate the determination of optimal soaking times. A series of germination tests revealed that the germination rate is mostly attributable to the rapid hydration of embryo tissues, as the highest gains in the germination rate occurred before the resumption of respiration. Germination uniformity, however, was not significantly improved until seeds were primed for at least 8 h, that is, after a first respiration burst was initiated. The maximum seedling vigour was attained when the priming was stopped just before the beginning of the differentiation of embryonic axes (20 h) after which vigour began to decrease (‘over-priming’). The onset of embryonic axis elongation was preceded by a second respiration burst, which can be used as a marker for priming optimization. Thus, monitoring of seed respiration provides a rapid and inexpensive alternative to the current practice. The method could be carried out by agricultural institutions to provide recommended optimal soaking times for the common barley varieties within a specific region.


2021 ◽  
Vol 13 (12) ◽  
pp. 6944
Author(s):  
Emma Anna Carolina Emanuelsson ◽  
Aurelie Charles ◽  
Parimala Shivaprasad

With stringent environmental regulations and a new drive for sustainable manufacturing, there is an unprecedented opportunity to incorporate novel manufacturing techniques. Recent political and pandemic events have shown the vulnerability to supply chains, highlighting the need for localised manufacturing capabilities to better respond flexibly to national demand. In this paper, we have used the spinning mesh disc reactor (SMDR) as a case study to demonstrate the path forward for manufacturing in the post-Covid world. The SMDR uses centrifugal force to allow the spread of thin film across the spinning disc which has a cloth with immobilised catalyst. The modularity of the design combined with the flexibility to perform a range of chemical reactions in a single equipment is an opportunity towards sustainable manufacturing. A global approach to market research allowed us to identify sectors within the chemical industry interested in novel reactor designs. The drivers for implementing change were identified as low capital cost, flexible operation and consistent product quality. Barriers include cost of change (regulatory and capital costs), limited technical awareness, safety concerns and lack of motivation towards change. Finally, applying the key features of a Sustainable Business Model (SBM) to SMDR, we show the strengths and opportunities for SMDR to align with an SBM allowing for a low-cost, sustainable and regenerative system of chemical manufacturing.


2021 ◽  
pp. 135481662098018
Author(s):  
Yasuo Ohe

Whether farm management in conducting tourism activity becomes more efficient or not is an important theoretical and empirical question for the promotion of tourism in agriculture. Thus, this study theoretically and empirically evaluated the efficiency of educational dairy farms that provide educational tourism by data envelopment analysis. The financial data were collected by the author’s survey of these farms located around the Tokyo Metropolitan area. Based on the theoretical framework that stipulates that the efficiency of farm activity is determined by a farmer’s identity, a bilateral slacks-based measure (SBM) model and Super SBM model were applied to empirically evaluate efficiency. The results revealed that those farmers who engage in processing milk products and direct selling have higher efficiency than those who do not. This is because having an enlarged identity that provides a wider perspective on farm activity enables these farmers to create demand and reduce marginal cost. This wider perspective was nurtured through the network of educational tourism activity. Thus, educational tourism activity by dairy farmers can nurture a new business opportunity and lead to efficient farm resource allocation. Identity can be a crucial factor in building rural entrepreneurship in tourism.


2021 ◽  
Vol 731 (1) ◽  
pp. 012024
Author(s):  
M N Cahyadi ◽  
E Y Handoko ◽  
R Mardiyanto ◽  
I M Anjasmara ◽  
Khomsin ◽  
...  

2000 ◽  
Vol 15 (1) ◽  
pp. 2-8 ◽  
Author(s):  
N.C. Wagner ◽  
S. Ramaswamy ◽  
U. Tschirner

AbstractA pre-economic feasibility study was undertaken to determine the potential of cereal straw for industrial utilization in Minnesota. Specifically, utilizing straw for pulp and paper manufacture was of interest. The availability of cereal straw fiber supplies at various locations across the state of Minnesota, along with pre-processing issues such as transportation, harvesting, handling, and storage, are discussed and priced. The greatest economic advantage of straw for industrial use appears to be the low cost of the raw material compared to traditional raw materials. This also provides an excellent opportunity for additional income for farmers. The methodology and information provided here should be helpful in evaluating the feasibility of utilizing straw for other industrial purposes in other parts of the world. However, in some Third World countries, long-standing on-farm, traditional uses of cereal straws for fuel, fiber, and animal feed may limit their availability for industrial utilization.


2005 ◽  
Vol 41 (1) ◽  
pp. 81-92 ◽  
Author(s):  
G. P. BUTLER ◽  
T. BERNET ◽  
K. MANRIQUE

Potatoes are an important cash crop for small-scale producers worldwide. The move away from subsistence to commercialized farming, combined with the rapid growth in demand for processed agricultural products in developing countries, implies that small-scale farmers and researchers alike must begin to respond to these market changes and consider post-harvest treatment as a critical aspect of the potato farming system. This paper presents and assesses a low cost potato-grading machine that was designed explicitly to enable small-scale potato growers to sort tubers by size for supply to commercial processors. The results of ten experiments reveal that the machine achieves an accuracy of sort similar to commercially available graders. The machine, which uses parallel conical rollers, has the capacity to grade different tuber shapes and to adjust sorting classes, making it suitable for locations with high potato diversity. Its relatively low cost suggests that an improved and adapted version of this machine might enhance market integration of small-scale potato producers not only in Peru, but in other developing countries as well.


Sign in / Sign up

Export Citation Format

Share Document