scholarly journals Model design and parameter optimization of CNN for side-channel cryptanalysis

2022 ◽  
Vol 7 ◽  
pp. e829
Author(s):  
Yun Lin Liu ◽  
Yan Kai Chen ◽  
Wei Xiong Li ◽  
Yang Zhang
Keyword(s):  
Parameter Optimization ◽  
Back Propagation ◽  
Experimental Parameter ◽  
Network Models ◽  
Learning Ability ◽  
Side Channel ◽  
Model Design ◽  
Training Time ◽  
Basic Model ◽  
Successful Recovery

Background The side-channel cryptanalysis method based on convolutional neural network (CNNSCA) can effectively carry out cryptographic attacks. The CNNSCA network models that achieve cryptanalysis mainly include CNNSCA based on the VGG variant (VGG-CNNSCA) and CNNSCA based on the Alexnet variant (Alex-CNNSCA). The learning ability and cryptanalysis performance of these CNNSCA models are not optimal, and the trained model has low accuracy, too long training time, and takes up more computing resources. In order to improve the overall performance of CNNSCA, the paper will improve CNNSCA model design and hyperparameter optimization. Methods The paper first studied the CNN architecture composition in the SCA application scenario, and derives the calculation process of the CNN core algorithm for side-channel leakage of one-dimensional data. Secondly, a new basic model of CNNSCA was designed by comprehensively using the advantages of VGG-CNNSCA model classification and fitting efficiency and Alex-CNNSCA model occupying less computing resources, in order to better reduce the gradient dispersion problem of error back propagation in deep networks, the SE (Squeeze-and-Excitation) module is newly embedded in this basic model, this module is used for the first time in the CNNSCA model, which forms a new idea for the design of the CNNSCA model. Then apply this basic model to a known first-order masked dataset from the side-channel leak public database (ASCAD). In this application scenario, according to the model design rules and actual experimental results, exclude non-essential experimental parameters. Optimize the various hyperparameters of the basic model in the most objective experimental parameter interval to improve its cryptanalysis performance, which results in a hyper-parameter optimization scheme and a final benchmark for the determination of hyper-parameters. Results Finally, a new CNNSCA model optimized architecture for attacking unprotected encryption devices is obtained—CNNSCAnew. Through comparative experiments, CNNSCAnew’s guessing entropy evaluation results converged to 61. From model training to successful recovery of the key, the total time spent was shortened to about 30 min, and we obtained better performance than other CNNSCA models.

Some statistical and CI models to predict chaotic high-frequency financial data

2020 ◽  
Vol 39 (5) ◽  
pp. 6419-6430
Author(s):  
Dusan Marcek
Keyword(s):  
Time Series Data ◽  
Moving Average ◽  
Methodological Approach ◽  
Back Propagation ◽  
Large Data ◽  
Series Data ◽  
Data Set ◽  
Training Time ◽  
Optimal Population ◽  
Forecast Time

To forecast time series data, two methodological frameworks of statistical and computational intelligence modelling are considered. The statistical methodological approach is based on the theory of invertible ARIMA (Auto-Regressive Integrated Moving Average) models with Maximum Likelihood (ML) estimating method. As a competitive tool to statistical forecasting models, we use the popular classic neural network (NN) of perceptron type. To train NN, the Back-Propagation (BP) algorithm and heuristics like genetic and micro-genetic algorithm (GA and MGA) are implemented on the large data set. A comparative analysis of selected learning methods is performed and evaluated. From performed experiments we find that the optimal population size will likely be 20 with the lowest training time from all NN trained by the evolutionary algorithms, while the prediction accuracy level is lesser, but still acceptable by managers.

scholarly journals Influence of hinge length and distribution number on the camber and cornering properties of a non-pneumatic tire

2020 ◽  
Vol 12 (12) ◽  
pp. 168781402098468
Author(s):  
Xianbin Du ◽  
Youqun Zhao ◽  
Yijiang Ma ◽  
Hongxun Fu
Keyword(s):  
Neural Network ◽  
Network Model ◽  
Adaptive Learning ◽  
High Speed ◽  
Back Propagation ◽  
Lateral Force ◽  
Learning Ability ◽  
Vehicle Performance ◽  
Neural Network Theory ◽  
Bp Neural Network Model

The camber and cornering properties of the tire directly affect the handling stability of vehicles, especially in emergencies such as high-speed cornering and obstacle avoidance. The structural and load-bearing mode of non-pneumatic mechanical elastic (ME) wheel determine that the mechanical properties of ME wheel will change when different combinations of hinge length and distribution number are adopted. The camber and cornering properties of ME wheel with different hinge lengths and distributions were studied by combining finite element method (FEM) with neural network theory. A ME wheel back propagation (BP) neural network model was established, and the additional momentum method and adaptive learning rate method were utilized to improve BP algorithm. The learning ability and generalization ability of the network model were verified by comparing the output values with the actual input values. The camber and cornering properties of ME wheel were analyzed when the hinge length and distribution changed. The results showed the variation of lateral force and aligning torque of different wheel structures under the combined conditions, and also provided guidance for the matching of wheel and vehicle performance.

scholarly journals Stock Market Prediction Using Artificial Neural Networks

2012 ◽  
Vol 6-7 ◽  
pp. 1055-1060 ◽  
Author(s):  
Yang Bing ◽  
Jian Kun Hao ◽  
Si Chang Zhang
Keyword(s):  
Neural Network ◽  
Prediction Models ◽  
Learning Algorithm ◽  
Stock Exchange ◽  
Back Propagation ◽  
Composite Index ◽  
Network Models ◽  
Back Propagation Neural Network ◽  
Neural Network Models ◽  
The Neural Network

In this study we apply back propagation Neural Network models to predict the daily Shanghai Stock Exchange Composite Index. The learning algorithm and gradient search technique are constructed in the models. We evaluate the prediction models and conclude that the Shanghai Stock Exchange Composite Index is predictable in the short term. Empirical study shows that the Neural Network models is successfully applied to predict the daily highest, lowest, and closing value of the Shanghai Stock Exchange Composite Index, but it can not predict the return rate of the Shanghai Stock Exchange Composite Index in short terms.

scholarly journals Forecasting Gold Prices Based on Extreme Learning Machine

2016 ◽  
Vol 11 (3) ◽  
pp. 372 ◽  
Author(s):  
Kumar Chandar Sivalingam ◽  
Sumathi Mahendran ◽  
Sivanandam Natarajan
Keyword(s):  
Extreme Learning Machine ◽  
Learning Algorithm ◽  
Back Propagation ◽  
Learning Ability ◽  
Stock Index ◽  
Feed Forward Back Propagation ◽  
Crude Oil Prices ◽  
The Future ◽  
Good Learning ◽  
Learning Machine

<p>In recent years, the investors pay major attention to invest in gold market ecause of huge profits in the future. Gold is the only commodity which maintains ts value even in the economic and financial crisis. Also, the gold prices are closely elated with other commodities. The future gold price prediction becomes the warning ystem for the investors due to unforeseen risk in the market. Hence, an accurate gold rice forecasting is required to foresee the business trends. This paper concentrates on orecasting the future gold prices from four commodities like historical data’s of gold rices, silver prices, Crude oil prices, Standard and Poor’s 500 stock index (S&amp;P500) ndex and foreign exchange rate. The period used for the study is from 1st January 000 to 31st April 2014. In this paper, a learning algorithm for single hidden layered eed forward neural networks called Extreme Learning Machine (ELM) is used which as good learning ability. Also, this study compares the five models namely Feed orward networks without feedback, Feed forward back propagation networks, Radial asis function, ELMAN networks and ELM learning model. The results prove that he ELM learning performs better than the other methods.</p>

Simulation of Compressor Transient Behavior Through Recurrent Neural Network Models

2005 ◽  
Vol 128 (3) ◽  
pp. 444-454 ◽  
Author(s):  
M. Venturini
Keyword(s):  
Measurement Errors ◽  
Learning Algorithm ◽  
Back Propagation ◽  
Network Models ◽  
Transient Behavior ◽  
Optimal Number ◽  
Measured Data ◽  
Outlet Temperature ◽  
Neural Network Models ◽  
Hidden Layer

In the paper, self-adapting models capable of reproducing time-dependent data with high computational speed are investigated. The considered models are recurrent feed-forward neural networks (RNNs) with one feedback loop in a recursive computational structure, trained by using a back-propagation learning algorithm. The data used for both training and testing the RNNs have been generated by means of a nonlinear physics-based model for compressor dynamic simulation, which was calibrated on a multistage axial-centrifugal small size compressor. The first step of the analysis is the selection of the compressor maneuver to be used for optimizing RNN training. The subsequent step consists in evaluating the most appropriate RNN structure (optimal number of neurons in the hidden layer and number of outputs) and RNN proper delay time. Then, the robustness of the model response towards measurement uncertainty is ascertained, by comparing the performance of RNNs trained on data uncorrupted or corrupted with measurement errors with respect to the simulation of data corrupted with measurement errors. Finally, the best RNN model is tested on field data taken on the axial-centrifugal compressor on which the physics-based model was calibrated, by comparing physics-based model and RNN predictions against measured data. The comparison between RNN predictions and measured data shows that the agreement can be considered acceptable for inlet pressure, outlet pressure and outlet temperature, while errors are significant for inlet mass flow rate.

Self-organizing probability neural network-based intelligent non-intrusive load monitoring with applications to low-cost residential measuring devices

2020 ◽  
pp. 014233122095086
Author(s):  
Zejian Zhou ◽  
Yingmeng Xiang ◽  
Hao Xu ◽  
Yishen Wang ◽  
Di Shi ◽  
...  
Keyword(s):  
Neural Network ◽  
Probabilistic Neural Network ◽  
Low Cost ◽  
Back Propagation ◽  
Learning Technologies ◽  
Training Time ◽  
The Public ◽  
Measuring Devices ◽  
Load Monitoring ◽  
Self Organizing

Non-intrusive load monitoring (NILM) is a critical technique for advanced smart grid management due to the convenience of monitoring and analysing individual appliances’ power consumption in a non-intrusive fashion. Inspired by emerging machine learning technologies, many recent non-intrusive load monitoring studies have adopted artificial neural networks (ANN) to disaggregate appliances’ power from the non-intrusive sensors’ measurements. However, back-propagation ANNs have a very limit ability to disaggregate appliances caused by the great training time and uncertainty of convergence, which are critical flaws for low-cost devices. In this paper, a novel self-organizing probabilistic neural network (SPNN)-based non-intrusive load monitoring algorithm has been developed specifically for low-cost residential measuring devices. The proposed SPNN has been designed to estimate the probability density function classifying the different types of appliances. Compared to back-propagation ANNs, the SPNN requires less iterative synaptic weights update and provides guaranteed convergence. Meanwhile, the novel SPNN has less space complexity when compared with conventional PNNs by the self-organizing mechanism which automatically edits the neuron numbers. These advantages make the algorithm especially favourable to low-cost residential NILM devices. The effectiveness of the proposed algorithm is demonstrated through numerical simulation by using the public REDD dataset. Performance comparisons with well-known benchmark algorithms have also been provided in the experiment section.

Research on Application of Artificial Intelligence in Computer Network Technology

2019 ◽  
Vol 33 (05) ◽  
pp. 1959015 ◽  
Author(s):  
Qingjun Wang ◽  
Peng Lu
Keyword(s):  
Artificial Intelligence ◽  
Intrusion Detection ◽  
Computer Network ◽  
False Negative ◽  
Back Propagation ◽  
False Negative Rate ◽  
Classification Performance ◽  
Network Size ◽  
Network Technology ◽  
Training Time

With the continuous expansion of the application scope of computer network technology, various malicious attacks that exist in the Internet range have caused serious harm to computer users and network resources. This paper attempts to apply artificial intelligence (AI) to computer network technology and research on the application of AI in computing network technology. Designing an intrusion detection model based on improved back propagation (BP) neural network. By studying the attack principle, analyzing the characteristics of the attack method, extracting feature data, establishing feature sets, and using the agent technology as the supporting technology, the simulation experiment is used to prove the improvement effect of the system in terms of false alarm rate, convergence speed, and false negative rate, the rate reached 86.7%. The results show that this fast algorithm reduces the training time of the network, reduces the network size, improves the classification performance, and improves the intrusion detection rate.

scholarly journals Predicting the Dispersion Relations of One-Dimensional Phononic Crystals by Neural Networks

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Chen-Xu Liu ◽  
Gui-Lan Yu
Keyword(s):  
Neural Networks ◽  
Prediction Accuracy ◽  
Mass Density ◽  
Back Propagation ◽  
Dispersion Relations ◽  
Phononic Crystals ◽  
Training Time ◽  
One Dimensional ◽  
Density Ratios ◽  
Parameter Prediction

Abstract In this paper, deep back propagation neural networks (DBP-NNs) and radial basis function neural networks (RBF-NNs) are employed to predict the dispersion relations (DRs) of one-dimensional (1D) phononic crystals (PCs). The data sets generated by transfer matrix method (TMM) are used to train the NNs and detect their prediction accuracy. In our work, filling fractions, mass density ratios and shear modulus ratios of PCs are considered as the input values of NNs. The results show that both the DBP-NNs and the RBF-NNs exhibit good performances in predicting the DRs of PCs. For one-parameter prediction, the RBF-NNs have shorter training time and remarkable prediction accuracy, for two- and three-parameter prediction, the DBP-NNs have more stable performance. The present work confirms the feasibility of predicting the DRs of PCs by NNs, and provides a useful reference for the application of NNs in the design of PCs and metamaterials.

Sign in / Sign up

Export Citation Format

Share Document