Three-dimensional intravascular ultrasonography: Reconstruction of endovascular stents in vitro and in vivo

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Download Full-text

Epithelial Organotypic Cultures: A Viable Model to Address Mechanisms of Carcinogenesis by Epitheliotropic Viruses

Current Topics in Medicinal Chemistry ◽

10.2174/1568026618666180410125850 ◽

2018 ◽

Vol 18 (4) ◽

pp. 246-255 ◽

Cited By ~ 1

Author(s):

Lara Termini ◽

Enrique Boccardo

Keyword(s):

Three Dimensional ◽

Cell Types ◽

Experimental Models ◽

Biological Research ◽

Specific Gene ◽

Specific Cell ◽

Organotypic Cultures ◽

Skin Physiology

In vitro culture of primary or established cell lines is one of the leading techniques in many areas of basic biological research. The use of pure or highly enriched cultures of specific cell types obtained from different tissues and genetics backgrounds has greatly contributed to our current understanding of normal and pathological cellular processes. Cells in culture are easily propagated generating an almost endless source of material for experimentation. Besides, they can be manipulated to achieve gene silencing, gene overexpression and genome editing turning possible the dissection of specific gene functions and signaling pathways. However, monolayer and suspension cultures of cells do not reproduce the cell type diversity, cell-cell contacts, cell-matrix interactions and differentiation pathways typical of the three-dimensional environment of tissues and organs from where they were originated. Therefore, different experimental animal models have been developed and applied to address these and other complex issues in vivo. However, these systems are costly and time consuming. Most importantly the use of animals in scientific research poses moral and ethical concerns facing a steadily increasing opposition from different sectors of the society. Therefore, there is an urgent need for the development of alternative in vitro experimental models that accurately reproduce the events observed in vivo to reduce the use of animals. Organotypic cultures combine the flexibility of traditional culture systems with the possibility of culturing different cell types in a 3D environment that reproduces both the structure and the physiology of the parental organ. Here we present a summarized description of the use of epithelial organotypic for the study of skin physiology, human papillomavirus biology and associated tumorigenesis.

Download Full-text

The Revolutionary Roads to Study Cell–Cell Interactions in 3D In Vitro Pancreatic Cancer Models

Cancers ◽

10.3390/cancers13040930 ◽

2021 ◽

Vol 13 (4) ◽

pp. 930

Author(s):

Donatella Delle Cave ◽

Riccardo Rizzo ◽

Bruno Sainz ◽

Giuseppe Gigli ◽

Loretta L. del Mercato ◽

...

Keyword(s):

Pancreatic Cancer ◽

Therapeutic Response ◽

Three Dimensional ◽

Cellular Models ◽

Common Cancer ◽

Cancer Models ◽

Anti Cancer ◽

Tumor Environment

Pancreatic cancer, the fourth most common cancer worldwide, shows a highly unsuccessful therapeutic response. In the last 10 years, neither important advancements nor new therapeutic strategies have significantly impacted patient survival, highlighting the need to pursue new avenues for drug development discovery and design. Advanced cellular models, resembling as much as possible the original in vivo tumor environment, may be more successful in predicting the efficacy of future anti-cancer candidates in clinical trials. In this review, we discuss novel bioengineered platforms for anticancer drug discovery in pancreatic cancer, from traditional two-dimensional models to innovative three-dimensional ones.

Download Full-text

Three-dimensional Growth of Renal Epithelial Cells in Vitro: A Tool in Toxicity Testing

Alternatives to Laboratory Animals ◽

10.1177/026119299302100212 ◽

1993 ◽

Vol 21 (2) ◽

pp. 191-195 ◽

Cited By ~ 1

Author(s):

Knut-Jan Andersen ◽

Erik Ilsø Christensen ◽

Hogne Vik

Keyword(s):

Epithelial Cells ◽

Three Dimensional ◽

Toxicity Testing ◽

Renal Tissue ◽

Epithelial Cell Line ◽

Multicellular Spheroids ◽

Renal Epithelial Cell ◽

Renal Epithelial Cells

The tissue culture of multicellular spheroids from the renal epithelial cell line LLC-PK1 (proximal tubule) is described. This represents a biological system of intermediate complexity between renal tissue in vivo and simple monolayer cultures. The multicellular structures, which show many similarities to kidney tubules in vivo, including a vectorial water transport, should prove useful for studying the potential nephrotoxicity of drugs and chemicals in vitro. In addition, the propagation of renal epithelial cells as multicellular spheroids in serum-free culture may provide information on the release of specific biological parameters, which may be suppressed or masked in serum-supplemented media.

Download Full-text

Mammary gland 3D cell culture systems in farm animals

Veterinary Research ◽

10.1186/s13567-021-00947-5 ◽

2021 ◽

Vol 52 (1) ◽

Author(s):

Laurence Finot ◽

Eric Chanat ◽

Frederic Dessauge

Keyword(s):

Cell Culture ◽

Mammary Gland ◽

Bacterial Infections ◽

Three Dimensional ◽

3D Cell Culture ◽

Farm Animals ◽

Culture Systems ◽

Cell Culture Systems

AbstractIn vivo study of tissue or organ biology in mammals is very complex and progress is slowed by poor accessibility of samples and ethical concerns. Fortunately, however, advances in stem cell identification and culture have made it possible to derive in vitro 3D “tissues” called organoids, these three-dimensional structures partly or fully mimicking the in vivo functioning of organs. The mammary gland produces milk, the source of nutrition for newborn mammals. Milk is synthesized and secreted by the differentiated polarized mammary epithelial cells of the gland. Reconstructing in vitro a mammary-like structure mimicking the functional tissue represents a major challenge in mammary gland biology, especially for farm animals for which specific agronomic questions arise. This would greatly facilitate the study of mammary gland development, milk secretion processes and pathological effects of viral or bacterial infections at the cellular level, all with the objective of improving milk production at the animal level. With this aim, various 3D cell culture models have been developed such as mammospheres and, more recently, efforts to develop organoids in vitro have been considerable. Researchers are now starting to draw inspiration from other fields, such as bioengineering, to generate organoids that would be more physiologically relevant. In this chapter, we will discuss 3D cell culture systems as organoids and their relevance for agronomic research.

Download Full-text

Three-Dimensional Zirconia-Based Scaffolds for Load-Bearing Bone-Regeneration Applications: Prospects and Challenges

Materials ◽

10.3390/ma14123207 ◽

2021 ◽

Vol 14 (12) ◽

pp. 3207

Author(s):

Kumaresan Sakthiabirami ◽

Vaiyapuri Soundharrajan ◽

Jin-Ho Kang ◽

Yunzhi Peter Yang ◽

Sang-Won Park

Keyword(s):

Bone Regeneration ◽

Biological Activities ◽

Three Dimensional ◽

In Vivo Studies ◽

High Mechanical Strength ◽

Real World Applications ◽

3D Fabrication ◽

Dental Applications

The design of zirconia-based scaffolds using conventional techniques for bone-regeneration applications has been studied extensively. Similar to dental applications, the use of three-dimensional (3D) zirconia-based ceramics for bone tissue engineering (BTE) has recently attracted considerable attention because of their high mechanical strength and biocompatibility. However, techniques to fabricate zirconia-based scaffolds for bone regeneration are in a stage of infancy. Hence, the biological activities of zirconia-based ceramics for bone-regeneration applications have not been fully investigated, in contrast to the well-established calcium phosphate-based ceramics for bone-regeneration applications. This paper outlines recent research developments and challenges concerning numerous three-dimensional (3D) zirconia-based scaffolds and reviews the associated fundamental fabrication techniques, key 3D fabrication developments and practical encounters to identify the optimal 3D fabrication technique for obtaining 3D zirconia-based scaffolds suitable for real-world applications. This review mainly summarized the articles that focused on in vitro and in vivo studies along with the fundamental mechanical characterizations on the 3D zirconia-based scaffolds.

Download Full-text

BanLec-eGFP Chimera as a Tool for Evaluation of Lectin Binding to High-Mannose Glycans on Microorganisms

Biomolecules ◽

10.3390/biom11020180 ◽

2021 ◽

Vol 11 (2) ◽

pp. 180

Author(s):

Zorana Lopandić ◽

Luka Dragačević ◽

Dragan Popović ◽

Uros Andjelković ◽

Rajna Minić ◽

...

Keyword(s):

Fluorescent Protein ◽

Lectin Binding ◽

Three Dimensional ◽

Data Bank ◽

Salmonella Typhi ◽

Excitation Wavelength ◽

Protein Data Bank Entry ◽

High Mannose

Fluorescently labeled lectins are useful tools for in vivo and in vitro studies of the structure and function of tissues and various pathogens such as viruses, bacteria, and fungi. For the evaluation of high-mannose glycans present on various glycoproteins, a three-dimensional (3D) model of the chimera was designed from the crystal structures of recombinant banana lectin (BanLec, Protein Data Bank entry (PDB): 5EXG) and an enhanced green fluorescent protein (eGFP, PDB 4EUL) by applying molecular modeling and molecular mechanics and expressed in Escherichia coli. BanLec-eGFP, produced as a soluble cytosolic protein of about 42 kDa, revealed β-sheets (41%) as the predominant secondary structures, with the emission peak maximum detected at 509 nm (excitation wavelength 488 nm). More than 65% of the primary structure was confirmed by mass spectrometry. Competitive BanLec-eGFP binding to high mannose glycans of the influenza vaccine (Vaxigrip®) was shown in a fluorescence-linked lectin sorbent assay (FLLSA) with monosaccharides (mannose and glucose) and wild type BanLec and H84T BanLec mutant. BanLec-eGFP exhibited binding to mannose residues on different strains of Salmonella in flow cytometry, with especially pronounced binding to a Salmonella Typhi clinical isolate. BanLec-eGFP can be a useful tool for screening high-mannose glycosylation sites on different microorganisms.

Download Full-text

Reversal of senescence-associated beta-galactosidase expression during in vitro three-dimensional tissue-engineering of human chondrocytes in a polymer scaffold

Scientific Reports ◽

10.1038/s41598-021-93607-9 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Shojiro Katoh ◽

Atsuki Fujimaru ◽

Masaru Iwasaki ◽

Hiroshi Yoshioka ◽

Rajappa Senthilkumar ◽

...

Keyword(s):

Regenerative Medicine ◽

Replicative Senescence ◽

Cultured Cells ◽

Three Dimensional ◽

Human Chondrocytes ◽

Cartilage Tissue ◽

Optimal Method ◽

Beta Galactosidase

AbstractRegenerative medicine applications require cells that are not inflicted with senescence after in vitro culture for an optimal in vivo outcome. Methods to overcome replicative senescence include genomic modifications which have their own disadvantages. We have evaluated a three-dimensional (3D) thermo-reversible gelation polymer (TGP) matrix environment for its capabilities to reverse cellular senescence. The expression of senescence-associated beta-galactosidase (SA-βgal) by human chondrocytes from osteoarthritis-affected cartilage tissue, grown in a conventional two-dimensional (2D) monolayer culture versus in 3D-TGP were compared. In 2D, the cells de-differentiated into fibroblasts, expressed higher SA-βgal and started degenerating at 25 days. SA-βgal levels decreased when the chondrocytes were transferred from the 2D to the 3D-TGP culture, with cells exhibiting a tissue-like growth until 42–45 days. Other senescence associated markers such as p16INK4a and p21 were also expressed only in 2D cultured cells but not in 3D-TGP tissue engineered cartilage. This is a first-of-its-kind report of a chemically synthesized and reproducible in vitro environment yielding an advantageous reversal of aging of human chondrocytes without any genomic modifications. The method is worth consideration as an optimal method for growing cells for regenerative medicine applications.

Download Full-text

Prevascularized, Co-Culture Model for Breast Cancer Drug Development

ASME 2012 Summer Bioengineering Conference, Parts A and B ◽

10.1115/sbc2012-80409 ◽

2012 ◽

Author(s):

Lauren Marshall ◽

Isabel Löwstedt ◽

Paul Gatenholm ◽

Joel Berry

Keyword(s):

Breast Cancer ◽

Drug Development ◽

Three Dimensional ◽

Human Tumor ◽

3D Models ◽

Cancer Drug ◽

Cancer Therapies ◽

Anti Cancer

The objective of this study was to create 3D engineered tissue models to accelerate identification of safe and efficacious breast cancer drug therapies. It is expected that this platform will dramatically reduce the time and costs associated with development and regulatory approval of anti-cancer therapies, currently a multi-billion dollar endeavor [1]. Existing two-dimensional (2D) in vitro and in vivo animal studies required for identification of effective cancer therapies account for much of the high costs of anti-cancer medications and health insurance premiums borne by patients, many of whom cannot afford it. An emerging paradigm in pharmaceutical drug development is the use of three-dimensional (3D) cell/biomaterial models that will accurately screen novel therapeutic compounds, repurpose existing compounds and terminate ineffective ones. In particular, identification of effective chemotherapies for breast cancer are anticipated to occur more quickly in 3D in vitro models than 2D in vitro environments and in vivo animal models, neither of which accurately mimic natural human tumor environments [2]. Moreover, these 3D models can be multi-cellular and designed with extracellular matrix (ECM) function and mechanical properties similar to that of natural in vivo cancer environments [3].

Download Full-text

The Role of Pre-Clinical 3-Dimensional Models of Osteosarcoma

International Journal of Molecular Sciences ◽

10.3390/ijms21155499 ◽

2020 ◽

Vol 21 (15) ◽

pp. 5499

Author(s):

Hannah L. Smith ◽

Stephen A. Beers ◽

Juliet C. Gray ◽

Janos M. Kanczler

Keyword(s):

Three Dimensional ◽

Chorioallantoic Membrane ◽

3D Models ◽

In Ovo ◽

Future Directions ◽

3 Dimensional ◽

In Vivo Animal Models

Treatment for osteosarcoma (OS) has been largely unchanged for several decades, with typical therapies being a mixture of chemotherapy and surgery. Although therapeutic targets and products against cancer are being continually developed, only a limited number have proved therapeutically active in OS. Thus, the understanding of the OS microenvironment and its interactions are becoming more important in developing new therapies. Three-dimensional (3D) models are important tools in increasing our understanding of complex mechanisms and interactions, such as in OS. In this review, in vivo animal models, in vitro 3D models and in ovo chorioallantoic membrane (CAM) models, are evaluated and discussed as to their contribution in understanding the progressive nature of OS, and cancer research. We aim to provide insight and prospective future directions into the potential translation of 3D models in OS.

Download Full-text