scholarly journals Electrically Pumped QD Light Emission from LEDs to Lasers

2021 ◽  
Vol 37 (6) ◽  
pp. 6-17
Author(s):  
Longjia Wu ◽  
Pieter Geiregat ◽  
Wenyong Liu ◽  
Zizhe Lu ◽  
Yiran Yan ◽  
...  
2007 ◽  
Vol 1035 ◽  
Author(s):  
S. Yu ◽  
Eunice Sok Ping Leong

AbstractThe realization of ZnO random cavities may be an appropriate approach to fabricate low-cost ZnO laser diodes as there is no stringent requirement in the design of the disordered media provided that they can sustain enough optical gain and feedback within the media to achieve closed-loop random lasing. However, ZnO random lasers suffer from some drawbacks such as relatively higher threshold than conventional lasers, lack of directionality and coherency light emission as well as the difficulty to realize electrically pumped ZnO random lasers. In this paper, a short review on the possibilities to realize low threshold directional electrically pumped ZnO random laser diodes.


Author(s):  
Ben O. Spurlock ◽  
Milton J. Cormier

The phenomenon of bioluminescence has fascinated layman and scientist alike for many centuries. During the eighteenth and nineteenth centuries a number of observations were reported on the physiology of bioluminescence in Renilla, the common sea pansy. More recently biochemists have directed their attention to the molecular basis of luminosity in this colonial form. These studies have centered primarily on defining the chemical basis for bioluminescence and its control. It is now established that bioluminescence in Renilla arises due to the luciferase-catalyzed oxidation of luciferin. This results in the creation of a product (oxyluciferin) in an electronic excited state. The transition of oxyluciferin from its excited state to the ground state leads to light emission.


Author(s):  
C. Jacobsen ◽  
J. Fu ◽  
S. Mayer ◽  
Y. Wang ◽  
S. Williams

In scanning luminescence x-ray microscopy (SLXM), a high resolution x-ray probe is used to excite visible light emission (see Figs. 1 and 2). The technique has been developed with a goal of localizing dye-tagged biochemically active sites and structures at 50 nm resolution in thick, hydrated biological specimens. Following our initial efforts, Moronne et al. have begun to develop probes based on biotinylated terbium; we report here our progress towards using microspheres for tagging.Our initial experiments with microspheres were based on commercially-available carboxyl latex spheres which emitted ~ 5 visible light photons per x-ray absorbed, and which showed good resistance to bleaching under x-ray irradiation. Other work (such as that by Guo et al.) has shown that such spheres can be used for a variety of specific labelling applications. Our first efforts have been aimed at labelling ƒ actin in Chinese hamster ovarian (CHO) cells. By using a detergent/fixative protocol to load spheres into cells with permeabilized membranes and preserved morphology, we have succeeded in using commercial dye-loaded, spreptavidin-coated 0.03μm polystyrene spheres linked to biotin phalloidon to label f actin (see Fig. 3).


Author(s):  
Gisèle Nicolas ◽  
Jean-Marie Bassot ◽  
Marie-Thérèse Nicolas

The use of fast-freeze fixation (FFF) followed by freeze-substitution (FS) brings substantial advantages which are due to the extreme rapidity of this fixation compared to the conventional one. The initial step, FFF, physically immobilizes most molecules and therefore arrests the biological reactions in a matter of milliseconds. The second step, FS, slowly removes the water content still in solid state and, at the same time, chemically fixes the other cell components in absence of external water. This procedure results in an excellent preservation of the ultrastructure, avoids osmotic artifacts,maintains in situ most soluble substances and keeps up a number of cell activities including antigenicities. Another point of interest is that the rapidity of the initial immobilization enables the capture of unstable structures which, otherwise, would slip towards a more stable state. When combined with electrophysiology, this technique arrests the ultrastructural modifications at a well defined state, allowing a precise timing of the events.We studied the epithelium of the elytra of the scale-worm, Harmothoe lunulata which has excitable, conductible and bioluminescent properties. The intracellular sites of the light emission are paracrystals of endoplasmic reticulum (PER), named photosomes (Fig.1). They are able to flash only when they are coupled with plasma membrane infoldings by dyadic or triadic junctions (Fig.2) basically similar to those of the striated muscle fibers. We have studied them before, during and after stimulation. FFF-FS showed that these complexes are labile structures able to diffentiate and dedifferentiate within milliseconds. Moreover, a transient network of endoplasmic reticulum was captured which we have named intermediate endoplasmic reticulum (IER) surrounding the PER (Fig.1). Numerous gap junctions are found in the membranous infoldings of the junctional complexes (Fig.3). When cryofractured, they cleave unusually (Fig.4-5). It is tempting to suggest that they play an important role in the conduction of the excitation.


2018 ◽  
Vol 138 (4) ◽  
pp. 375-380
Author(s):  
Yuma Sugishita ◽  
Keisuke Inukai ◽  
Keishiro Goshima

2019 ◽  
Author(s):  
Patricia Scheurle ◽  
Andre Mähringer ◽  
Andreas Jakowetz ◽  
Pouya Hosseini ◽  
Alexander Richter ◽  
...  

Recently, a small group of metal-organic frameworks (MOFs) has been discovered featuring substantial charge transport properties and electrical conductivity, hence promising to broaden the scope of potential MOF applications in fields such as batteries, fuel cells and supercapacitors. In combination with light emission, electroactive MOFs are intriguing candidates for chemical sensing and optoelectronic applications. Here, we incorporated anthracene-based building blocks into the MOF-74 topology with five different divalent metal ions, that is, Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, resulting in a series of highly crystalline MOFs, coined ANMOF-74(M). This series of MOFs features substantial photoluminescence, with ANMOF-74(Zn) emitting across the whole visible spectrum. The materials moreover combine this photoluminescence with high surface areas and electrical conductivity. Compared to the original MOF-74 materials constructed from 2,5-dihydroxy terephthalic acid and the same metal ions Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, we observed a conductivity enhancement of up to six orders of magnitude. Our results point towards the importance of building block design and the careful choice of the embedded MOF topology for obtaining materials with desired properties such as photoluminescence and electrical conductivity.


Author(s):  
Randal Mulder ◽  
Sam Subramanian ◽  
Tony Chrastecky

Abstract The use of atomic force probe (AFP) analysis in the analysis of semiconductor devices is expanding from its initial purpose of solely characterizing CMOS transistors at the contact level with a parametric analyzer. Other uses found for the AFP include the full electrical characterization of failing SRAM bit cells, current contrast imaging of SOI transistors, measuring surface roughness, the probing of metallization layers to measure leakages, and use with other tools, such as light emission, to quickly localize and identify defects in logic circuits. This paper presents several case studies in regards to these activities and their results. These case studies demonstrate the versatility of the AFP. The needs and demands of the failure analysis environment have quickly expanded its use. These expanded capabilities make the AFP more valuable for the failure analysis community.


Sign in / Sign up

Export Citation Format

Share Document