scholarly journals Bounded inputs total energy shaping for a class of underactuated mechanical systems

Author(s):  
M. Reza J. Harandi ◽  
Hamid D. Taghirad ◽  
Amir Molaei ◽  
Jose Guadalupe Romero
2001 ◽  
Vol 34 (6) ◽  
pp. 1135-1140
Author(s):  
Fabio Gómez-Estern ◽  
Romeo Ortega ◽  
Mark W. Spong

Author(s):  
Dongfang Zhu ◽  
Di Zhou ◽  
Jingyang Zhou ◽  
Kok Lay Teo

A synchronization control strategy for a class of underactuated mechanical systems is proposed by using the energy shaping technique, aiming to achieve the required performance of the synchronization motion. A synchronization controller is designed based on the interconnection and damping assignment passivity-based control methodology. It will guarantee that the position tracking errors and the synchronization errors of the underactuated mechanical systems are to converge to zero asymptotically. Experiments on a synchronization control system with two single-inverted pendulums as well as simulations of a synchronization control system consisting of four ball-beam devices are presented to demonstrate the effectiveness of the proposed method.


2007 ◽  
Vol 52 (6) ◽  
pp. 1093-1099 ◽  
Author(s):  
G. Viola ◽  
R. Ortega ◽  
R. Banavar ◽  
J. A. Acosta ◽  
A. Astolfi

Author(s):  
Afef Hfaiedh ◽  
Ahmed Chemori ◽  
Afef Abdelkrim

In this paper, the control problem of a class I of underactuated mechanical systems (UMSs) is addressed. The considered class includes nonlinear UMSs with two degrees of freedom and one control input. Firstly, we propose the design of a robust integral of the sign of the error (RISE) control law, adequate for this special class. Based on a change of coordinates, the dynamics is transformed into a strict-feedback (SF) form. A Lyapunov-based technique is then employed to prove the asymptotic stability of the resulting closed-loop system. Numerical simulation results show the robustness and performance of the original RISE toward parametric uncertainties and disturbance rejection. A comparative study with a conventional sliding mode control reveals a significant robustness improvement with the proposed original RISE controller. However, in real-time experiments, the amplification of the measurement noise is a major problem. It has an impact on the behaviour of the motor and reduces the performance of the system. To deal with this issue, we propose to estimate the velocity using the robust Levant differentiator instead of the numerical derivative. Real-time experiments were performed on the testbed of the inertia wheel inverted pendulum to demonstrate the relevance of the proposed observer-based RISE control scheme. The obtained real-time experimental results and the obtained evaluation indices show clearly a better performance of the proposed observer-based RISE approach compared to the sliding mode and the original RISE controllers.


Sign in / Sign up

Export Citation Format

Share Document