Investigation of the optimal timing for chondrogenic priming of MSCs to enhance osteogenic differentiation in vitro as a bone tissue engineering strategy

2013 ◽  
Vol 10 (4) ◽  
pp. E250-E262 ◽  
Author(s):  
F. E. Freeman ◽  
M. G. Haugh ◽  
L. M. McNamara
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Optimal Timing ◽  
Engineering Strategy

scholarly journals Biomechanical study of cellulose scaffolds for bone tissue engineering in vivo and in vitro.

2021 ◽  
Author(s):  
Maxime Leblanc Latour ◽  
Maryam Tarar ◽  
Ryan J. Hickey ◽  
Charles M. Cuerrier ◽  
Isabelle Catelas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Cell Invasion ◽  
Osteogenic Potential ◽  
Load Bearing

Plant-derived cellulose biomaterials have recently been utilized in several tissue engineering applications. These naturally-derived cellulose scaffolds have been shown to be highly biocompatible in vivo, possess structural features of relevance to several tissues, and support mammalian cell invasion and proliferation. Recent work utilizing decellularized apple hypanthium tissue has shown that it possesses a pore size similar to trabecular bone and can successfully host osteogenic differentiation. In the present study, we further examined the potential of apple-derived cellulose scaffolds for bone tissue engineering (BTE) and analyzed their mechanical properties in vitro and in vivo. MC3T3-E1 pre-osteoblasts were seeded in cellulose scaffolds. Following chemically-induced osteogenic differentiation, scaffolds were evaluated for mineralization and for their mechanical properties. Alkaline phosphatase and Alizarin Red staining confirmed the osteogenic potential of the scaffolds. Histological analysis of the constructs revealed cell invasion and mineralization throughout the constructs. Furthermore, scanning electron microscopy demonstrated the presence of mineral aggregates on the scaffolds after culture in differentiation medium, and energy-dispersive spectroscopy confirmed the presence of phosphate and calcium. However, although the Young′s modulus significantly increased after cell differentiation, it remained lower than that of healthy bone tissue. Interestingly, mechanical assessment of acellular scaffolds implanted in rat calvaria defects for 8 weeks revealed that the force required to push out the scaffolds from the surrounding bone was similar to that of native calvarial bone. In addition, cell infiltration and extracellular matrix deposition were visible within the implanted scaffolds. Overall, our results confirm that plant-derived cellulose is a promising candidate for BTE applications. However, the discrepancy in mechanical properties between the mineralized scaffolds and healthy bone tissue may limit their use to low load-bearing applications. Further structural re-engineering and optimization to improve the mechanical properties may be required for load-bearing applications.

Extracellular matrix-inspired BMP-2-delivering biodegradable fibrous particles for bone tissue engineering

2015 ◽  
Vol 3 (42) ◽  
pp. 8375-8382 ◽  
Author(s):  
Young Min Shin ◽  
Wan-Geun La ◽  
Min Suk Lee ◽  
Hee Seok Yang ◽  
Youn-Mook Lim
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Bone Defect

A heparin conjugated fibrous particle resembling the structure of an extracellular matrix was developed. The BMP-2 loaded particles promoted osteogenic differentiation and healing of a bone defect, in vitro and in vivo.

scholarly journals La-Doped mesoporous calcium silicate/chitosan scaffolds for bone tissue engineering

2019 ◽  
Vol 7 (4) ◽  
pp. 1565-1573 ◽  
Author(s):  
Xiao-Yuan Peng ◽  
Min Hu ◽  
Fang Liao ◽  
Fan Yang ◽  
Qin-Fei Ke ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Calcium Silicate ◽  
Chitosan Scaffolds ◽  
La Doped

La-MCS/CTS scaffolds promoted the proliferation and osteogenic differentiation of rBMSCs in vitro and bone regeneration in vivo.

scholarly journals In vitro evaluation of novel low-pressure spark plasma sintered HA–BG composite scaffolds for bone tissue engineering

RSC Advances ◽  
2020 ◽  
Vol 10 (40) ◽  
pp. 23813-23828
Author(s):  
Muhammad Rizwan ◽  
Krishnamurithy Genasan ◽  
Malliga Raman Murali ◽  
Hanumantha Rao Balaji Raghavendran ◽  
Rodianah Alias ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Composite Scaffolds ◽  
In Vitro Evaluation ◽  
Monocyte Migration ◽  
Spark Plasma

HB 30 S composite scaffold inhibits Staphylococcus spp., supports the biocompatibility and osteogenic differentiation of hBMSCs and resists monocyte migration.

scholarly journals Black Phosphorus Nanoparticles Promote Osteogenic Differentiation of EMSCs Through Upregulated TG2 Expression

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Naiyan Lu ◽  
Xinhe Wang ◽  
Wentao Shi ◽  
Lu Bian ◽  
Xuan Zhang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Transglutaminase 2 ◽  
Black Phosphorus ◽  
Bone Tissue Regeneration ◽  
High Yield ◽  
Promoting Effect

AbstractAt bio-safe concentrations, black phosphorus nanoparticles activated TG2, and promote the expression of ECM, which further promoted osteogenic differentiation of EMSCs. From these results, we can conclude that black phosphorus nanoparticles are suitable as biological factors in bone tissue engineering. Black phosphorus nanoparticles (BPs) present excellent biocompatibility and good biodegradability, which have been rigorously studied and proven. However, its utilization in bone tissue engineering fields is still in its infancy. Thus, the main purpose of the present study was to investigate the effects of BPs on osteogenic differentiation of ectodermal mesenchymal stem cell (EMSC) in vitro. Biocompatible BPs with high yield were prepared with a simple and efficient ultrasonication technique. EMSCs were isolated from adult rat nasal respiratory mucosa. Then, we treated EMSCs with BPs at different concentrations in vitro and examined the effect of BPs on osteogenic differentiation of EMSCs. In addition, inhibitor of transglutaminase 2 (TG2) and western blot were used to clarify the mechanism of the promoting effect of BPs on osteogenesis. Our results indicated that BPs could significantly enhance osteogenic differentiation of EMSCs in vitro. Nevertheless, BPs had no effect on EMSCs proliferation. Mechanistically, BPs promoted osteogenesis differentiation of EMSCs through upregulating TG2 expression. These results highlight the advantage of using chemical materials for novel engineering strategies of these highly promising small molecules for bone-tissue regeneration.

scholarly journals An In Vitro Evaluation of the Biological and Osteogenic Properties of Magnesium-Doped Bioactive Glasses for Application in Bone Tissue Engineering

2021 ◽  
Vol 22 (23) ◽  
pp. 12703
Author(s):  
Frederike Hohenbild ◽  
Marcela Arango Ospina ◽  
Sarah I. Schmitz ◽  
Arash Moghaddam ◽  
Aldo R. Boccaccini ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Differentiation Markers ◽  
Bioactive Glasses ◽  
Ecm Proteins ◽  
Expression Of Genes ◽  
Genes Encoding

Magnesium (Mg2+) is known to play a crucial role in mineral and matrix metabolism of bone tissue and is thus increasingly considered in the field of bone tissue engineering. Bioactive glasses (BGs) offer the promising possibility of the incorporation and local delivery of therapeutically active ions as Mg2+. In this study, two Mg2+-doped derivatives of the ICIE16-BG composition (49.46 SiO2, 36.27 CaO, 6.6 Na2O, 1.07 P2O5, 6.6 K2O (mol%)), namely 6Mg-BG (49.46 SiO2, 30.27 CaO, 6.6 Na2O, 1.07 P2O5, 6.6 K2O, 6.0 MgO (mol%) and 3Mg-BG (49.46 SiO2, 33.27 CaO, 6.6 Na2O, 1.07 P2O5, 6.6 K2O, 3.0 MgO (mol%)) were examined. Their influence on viability, proliferation and osteogenic differentiation of human mesenchymal stromal cells (MSCs) was explored in comparison to the original ICIE16-BG. All BGs showed good biocompatibility. The Mg2+-doped BGs had a positive influence on MSC viability alongside with inhibiting effects on MSC proliferation. A strong induction of osteogenic differentiation markers was observed, with the Mg2+-doped BGs significantly outperforming the ICIE16-BG regarding the expression of genes encoding for protein members of the osseous extracellular matrix (ECM) at certain observation time points. However, an overall Mg2+-induced enhancement of the expression of genes encoding for ECM proteins could not be observed, possibly due to a too moderate Mg2+ release. By adaption of the Mg2+ release from BGs, an even stronger impact on the expression of genes encoding for ECM proteins might be achieved. Furthermore, other BG-types such as mesoporous BGs might provide a higher local presence of the therapeutically active ions and should therefore be considered for upcoming studies.

scholarly journals Aldo-keto reductase family 1 member C1 regulates the osteogenic differentiation of human ASCs by targeting the progesterone receptor

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xuenan Liu ◽  
Xiaomin Lian ◽  
Xuejiao Liu ◽  
Yangge Du ◽  
Yuan Zhu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Progesterone Receptor ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Adipogenic Differentiation ◽  
Molecular Target ◽  
Negative Regulator

Abstract Background As a promising way to repair bone defect, bone tissue engineering has attracted a lot of attentions from researchers in recent years. Searching for new molecular target to modify the seed cells and enhance their osteogenesis capacity is one of the hot topics in this field. As a member of aldo-keto reductase family, aldo-keto reductase family 1 member C1 (AKR1C1) is reported to associate with various tumors. However, whether AKR1C1 takes part in regulating differentiation of adipose-derived mesenchymal stromal/stem cells (ASCs) and its relationship with progesterone receptor (PGR) remain unclear. Methods Lost-and-gain-of-function experiments were performed using knockdown and overexpression of AKR1C1 to identify its role in regulating osteogenic and adipogenic differentiation of hASCs in vitro. Heterotypic bone and adipose tissue formation assay in nude mice were used to conduct the in vivo experiment. Plasmid and siRNA of PGR, as well as western blot, were used to clarify the mechanism AKR1C1 regulating osteogenesis. Results Our results demonstrated that AKR1C1 acted as a negative regulator of osteogenesis and a positive regulator of adipogenesis of hASCs via its enzyme activity both in vitro and in vivo. Mechanistically, PGR mediated the regulation of AKR1C1 on osteogenesis. Conclusions Collectively, our study suggested that AKR1C1 could serve as a regulator of osteogenic differentiation via targeting PGR and be used as a new molecular target for ASCs modification in bone tissue engineering.

scholarly journals Gelatin methacrylate hydrogel scaffold carrying resveratrol-loaded solid lipid nanoparticles for enhancement of osteogenic differentiation of BMSCs and effective bone regeneration

2021 ◽  
Author(s):  
Bangguo Wei ◽  
Wenrui Wang ◽  
Xiangyu Liu ◽  
Chenxi Xu ◽  
Yanan Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Tumour Resection ◽  
Solid Lipid

Abstract Critical-sized bone defects caused by traumatic fractures, tumour resection, and congenital malformation are unlikely to heal spontaneously. Bone tissue engineering is a promising strategy aimed at developing in vitro replacements for bone transplantation and overcoming the limitations of natural bone grafts. In this study, we developed an innovative bone engineering scaffold based on gelatin methacrylate (GelMA) hydrogel, obtained via a two-step procedure: first, solid lipid nanoparticles (SLNs) were loaded with resveratrol (Res), a drug that can promote osteogenic differentiation and bone formation; these particles were then encapsulated at different concentrations (0.01%, 0.02%, 0.04%, and 0.08%) in GelMA to obtain the final Res-SLNs/GelMA scaffolds. The effects of these scaffolds on osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and bone regeneration in rat cranial defects were evaluated using various characterization assays. Our in vitro and in vivo investigations demonstrated that the different Res-SLNs/GelMA scaffolds improved the osteogenic differentiation of BMSCs, with the ideally slow and steady release of Res; the optimal scaffold was 0.02 Res-SLNs/GelMA. Therefore, the 0.02 Res-SLNs/GelMA hydrogel is an appropriate release system for Res with good biocompatibility, osteoconduction, and osteoinduction, thereby showing potential for application in bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document