The optimal sintering atmosphere and defect structure of CuO-doped NKN-based ceramic with p/n-type conduction mechanism

Author(s):  
Zhenxing Wang ◽  
Yu Huan ◽  
Huizhong Wang ◽  
Yu Qiu ◽  
Yue Feng ◽  
...  
2002 ◽  
Vol 57 (11) ◽  
pp. 897-908 ◽  
Author(s):  
M. F. Mostafa ◽  
M. M. AbdelKader ◽  
S. S. Arafat

The dielectric permittivity and AC conductivity of the perovskite-like system [(NH3)(CH2)6(NH3)]FexZn1-xCl4 (HDAFxZ1-x), where x=1, 0.8, 0.5 and 0, were measured at different frequencies in the temperature range 100 K<T<430 K. At temperatures below 273 K, for x=1 the material exhibits a transition at (245±1) K, while for x=0 transitions at (155±5) K, (220±4) K and (255±2) K were found. A rotational-type transition in the range 295 - 305 K was found for the Fe-containing materials. Ferroelectric transitions were observed in the high temperature region for all four concentrations. Differential thermal scanning confirmed the existence of the phase transitions above room temperature. The conductivity decreases with Zn addition, an the conduction mechanism varies with the temperature and concentration. Extrinsic conduction prevails for T<150 K for all concentrations. At intermediate temperatures an Arrhenius relation with frequency dependent activation energy (ΔE=0.46 - 0.06 eV) is observed for Fecontaining materials. The frequency dependent conductivity for all materials has a linear response following the power law: σac=A(T) ·ωS(T) with the exponent s varying with temperature and composition. At high temperatures, for Zn-rich materials series type conduction with s ∼ 0.6±0.1 is identified, while for Fe-rich materials band type conduction prevails. In the low temperature region ionic hopping prevails.


1991 ◽  
Vol 48 (3-4) ◽  
pp. 283-288 ◽  
Author(s):  
T INOUE ◽  
N SEKI ◽  
J KAMIMAE ◽  
K EGUCHI ◽  
H ARAI

2019 ◽  
Vol 100 (11) ◽  
Author(s):  
X. C. Huang ◽  
J. Y. Zhang ◽  
M. Wu ◽  
S. Zhang ◽  
H. Y. Xiao ◽  
...  

2013 ◽  
Vol 820 ◽  
pp. 3-6 ◽  
Author(s):  
Zhong Biao Zhao ◽  
Peng Wang ◽  
Li Bo Fan ◽  
Zi Fa Chen ◽  
Dong Luo Yang

A Lead sulfide (PbS) film synthesized by ultrasonic wave assisted chemical bath deposition (CBD) method. The as-deposited films were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) measurements. The photoelectrochemical (PEC) cell, with PbS/ITO/glass as a photo cathode and Na2SO4 (0.10 M) solution as an electrolyte, was constructed and investigated for PEC properties. The film shows a p-type conduction mechanism.


Sign in / Sign up

Export Citation Format

Share Document