Friction, Lubrication, and Surface Quality

2016 ◽  
pp. 67-90
Author(s):  
Roger N. Wright
Keyword(s):  
Surface Quality

AL 468 ALLOY

Alloy Digest ◽  
1995 ◽  
Vol 44 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Surface Quality ◽  
Heat Treating ◽  
Temperature Performance ◽  
Chromium Stainless Steel

Abstract AL 468 is an 18% chromium stainless steel with dual stabilization by titanium and columbium. Small angular carbonitrides of both titanium and columbium are randomly dispersed, but develop improved surface quality, strength, and oxidation resistance when compared to Type 439. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-597. Producer or source: Allegheny Ludlum Corporation.

Concrete Surface Quality Improvement Technique Using Highly Water Repellent Sealing Method

2016 ◽  
Vol 54 (11) ◽  
pp. 1105-1110
Author(s):  
K. Watanabe ◽  
G. Sakai ◽  
N. Sakata ◽  
T. Ishida
Keyword(s):  
Quality Improvement ◽  
Surface Quality ◽  
Concrete Surface ◽  
Water Repellent

Schwingungsüberlagertes Axialformen/Superimposed Oscillated Axial Forming

2020 ◽  
Vol 110 (11-12) ◽  
pp. 838-843
Author(s):  
Philipp Müller ◽  
Bernd-Arno Behrens ◽  
Sven Hübner ◽  
Hendrik Vogt ◽  
Daniel Rosenbusch ◽  
...  
Keyword(s):  
Surface Quality ◽  
Economic Importance ◽  
Combined Effect ◽  
Wird Eine ◽  
Forming Force ◽  
Forming Process ◽  
Forming Technology ◽  
Great Economic Importance ◽  
Gear Geometry

Techniken zur Steigerung der Formgebungsgrenzen in der Umformtechnik sind von hoher wirtschaftlicher Bedeutung. In dieser Arbeit wird eine Schwingungsüberlagerung im Krafthauptfluss eines Axialformprozesses zur Ausprägung einer Verzahnungsgeometrie untersucht. Die Auswirkungen der Schwingung auf die erzielbare Ausfüllung der Zahnkavitäten werden analysiert sowie die Parameter Schmierung und Oberflächengüte der Halbzeuge in ihrer kombinierten Wirkung untersucht. Es konnte eine Reduzierung der mittleren Umformkraft sowie eine Erhöhung der Formfüllung festgestellt werden. Techniques for extending the production limits in forming technology are of great economic importance. In this research, a superimposed oscillation in the main force flow of an axial forming process to form an axial gear geometry is investigated. The effects of the superimposed oscillation on the achievable form-filling of the tooth cavities are analyzed and the parameters lubrication and surface quality of the semi-finished products are investigated in their combined effect. A reduction of the averaged forming force as well as an increase of the form-filling could be achieved.

Research Status of Subsequent Machining of Laser Cladding Layers

2020 ◽  
Vol 15 ◽  
Author(s):  
Lei Li ◽  
Yujun Cai ◽  
Guohe Li ◽  
Meng Liu
Keyword(s):  
Tool Wear ◽  
Surface Quality ◽  
Laser Cladding ◽  
Wear Surface ◽  
Chip Formation ◽  
Cutting Temperature ◽  
Dimensional Accuracy ◽  
Cutting Parameters ◽  
Cladding Layer ◽  
Cladding Layers

Background: As an important method of remanufacturing, laser cladding can be used to obtain the parts with specific shapes by stacking materials layer by layer. The formation mechanism of laser cladding determines the “Staircase effect”, which makes the surface quality can hardly meet the dimensional accuracy of the parts. Therefore, the subsequent machining must be performed to improve the dimensional accuracy and surface quality of cladding parts. Methods: In this paper, chip formation, cutting force, cutting temperature, tool wear, surface quality, and optimization of cutting parameters in the subsequent cutting of laser cladding layer are analyzed. Scholars have expounded and studied these five aspects but the cutting mechanism of laser cladding need further research. Results: The characteristics of cladding layer are similar to that of difficult to machine materials, and the change of parameters has a significant impact on the cutting performance. Conclusion: The research status of subsequent machining of cladding layers is summarized, mainly from the aspects of chip formation, cutting force, cutting temperature, tool wear, surface quality, and cutting parameters optimization. Besides, the existing problems and further developments of subsequent machining of cladding layers are pointed out. The efforts are helpful to promote the development and application of laser cladding remanufacturing technology.

Sign in / Sign up

Export Citation Format

Share Document