This work proposes a novel approach for geometric integrity assessment of additive manufactured (AM, 3D printed) components, exemplified by acrylonitrile butadiene styrene (ABS) polymer parts made using fused filament fabrication (FFF) process. The following two research questions are addressed in this paper: (1) what is the effect of FFF process parameters, specifically, infill percentage (If) and extrusion temperature (Te) on geometric integrity of ABS parts?; and (2) what approach is required to differentiate AM parts with respect to their geometric integrity based on sparse sampling from a large (∼ 2 million data points) laser-scanned point cloud dataset? To answer the first question, ABS parts are produced by varying two FFF parameters, namely, infill percentage (If) and extrusion temperature (Te) through design of experiments. The part geometric integrity is assessed with respect to key geometric dimensioning and tolerancing (GD&T) features, such as flatness, circularity, cylindricity, root mean square deviation, and in-tolerance percentage. These GD&T parameters are obtained by laser scanning of the FFF parts. Concurrently, coordinate measurements of the part geometry in the form of 3D point cloud data is also acquired. Through response surface statistical analysis of this experimental data it was found that discrimination of geometric integrity between FFF parts based on GD&T parameters and process inputs alone was unsatisfactory (regression R2 < 50%). This directly motivates the second question. Accordingly, a data-driven analytical approach is proposed to classify the geometric integrity of FFF parts using minimal number (< 2% of total) of laser-scanned 3D point cloud data. The approach uses spectral graph theoretic Laplacian eigenvalues extracted from the 3D point cloud data in conjunction with a modeling framework called sparse representation to classify FFF part quality contingent on the geometric integrity. The practical outcome of this work is a method that can quickly classify the part geometric integrity with minimal point cloud data and high classification fidelity (F-score > 95%), which bypasses tedious coordinate measurement.
Quantitative evaluation of peeling and delamination on infrastructure surfaces by laser signal and image processing of 3D point cloud data
