Conductive, self-healing and recyclable electrodes for dielectric elastomer generator with high energy density

2022 ◽  
Vol 429 ◽  
pp. 132258
Author(s):  
Wenpeng Zang ◽  
Xueying Liu ◽  
Junjie Li ◽  
Yingjie Jiang ◽  
Bing Yu ◽  
...  
Keyword(s):  
Energy Density ◽  
High Energy ◽  
Dielectric Elastomer ◽  
High Energy Density ◽  
Self Healing

scholarly journals Analysis on Mechanical Behavior of Acrylate Dielectric Elastomers

2019 ◽  
Vol 804 ◽  
pp. 59-62
Author(s):  
Min Wei ◽  
Wei Li ◽  
Zhen Qiang Song ◽  
Shijie Zhu
Keyword(s):  
Energy Density ◽  
Mechanical Behavior ◽  
Artificial Muscle ◽  
Response Speed ◽  
Fast Response ◽  
High Energy ◽  
Dielectric Elastomer ◽  
High Energy Density ◽  
Flexible Robot ◽  
Deformation Ability

The dielectric elastomer (DE) has the advantages of large deformation ability, fast response speed, low price and high energy density. Therefore, DE has great prospects as artificial muscle and flexible robot. The purpose of the research is to clarify the mechanical behavior for acrylate dielectric elastomer by tensile test, fatigue test and viscoelasticity measurement.

scholarly journals Design, Manufacturing, and Characterization of Thin, Core-Free, Rolled Dielectric Elastomer Actuators

Actuators ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 69
Author(s):  
Julian Kunze ◽  
Johannes Prechtl ◽  
Daniel Bruch ◽  
Bettina Fasolt ◽  
Sophie Nalbach ◽  
...  
Keyword(s):  
Energy Density ◽  
High Energy ◽  
Dielectric Elastomer ◽  
High Energy Density ◽  
Artificial Muscles ◽  
Hollow Core ◽  
Dielectric Elastomer Actuators ◽  
Mass Load ◽  
Silicone Film

In this work, we develop a coreless rolled dielectric elastomer actuator (CORDEA) to be used as artificial muscles in soft robotic structures. The new CORDEA concept is based on a 50 µm silicone film with screen-printed electrodes made of carbon black suspended in polydimethylsiloxane. Two printed silicone films are stacked together and then tightly rolled in a spiral-like structure. Readily available off-the-shelf components are used to implement both electrical and mechanical contacts. A novel manufacturing process is developed to enable the production of rolled actuators without a hollow core, with a focus on simplicity and reliability. In this way, actuator systems with high energy density can be effectively achieved. After presenting the design, an experimental evaluation of the CORDEA electromechanical behavior is performed. Finally, actuator experiments in which the CORDEA is pre-loaded with a mass load and subsequently subject to cycling voltage are illustrated, and the resulting performance is discussed.

scholarly journals Deep Insight into the Influences of the Intrinsic Properties of Dielectric Elastomer on the Energy-Harvesting Performance of the Dielectric Elastomer Generator

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4202
Author(s):  
Yingjie Jiang ◽  
Yujia Li ◽  
Haibo Yang ◽  
Nanying Ning ◽  
Ming Tian ◽  
...  
Keyword(s):  
Energy Density ◽  
Energy Harvesting ◽  
Conversion Efficiency ◽  
High Energy ◽  
Dielectric Elastomer ◽  
High Energy Density ◽  
Breakdown Field ◽  
Intrinsic Properties ◽  
High Permittivity ◽  
The Relationship

The dielectric elastomer (DE) generator (DEG), which can convert mechanical energy to electrical energy, has attracted considerable attention in the last decade. Currently, the energy-harvesting performances of the DEG still require improvement. One major reason is that the mechanical and electrical properties of DE materials are not well coordinated. To provide guidance for producing high-performance DE materials for the DEG, the relationship between the intrinsic properties of DE materials and the energy-harvesting performances of the DEG must be revealed. In this study, a simplified but validated electromechanical model based on an actual circuit is developed to study the relationship between the intrinsic properties of DE materials and the energy-harvesting performance. Experimental verification of the model is performed, and the results indicate the validity of the proposed model, which can well predict the energy-harvesting performances. The influences of six intrinsic properties of DE materials on energy-harvesting performances is systematically studied. The results indicate that a high breakdown field strength, low conductivity and high elasticity of DE materials are the prerequisites for obtaining high energy density and conversion efficiency. DE materials with high elongation at break, high permittivity and moderate modulus can further improve the energy density and conversion efficiency of the DEG. The ratio of permittivity and the modulus of the DE should be tailored to be moderate to optimize conversion efficiency (η) of the DEG because using DE with high permittivity but extremely low modulus may lead to a reduction in η due to the occurrence of premature “loss of tension”.

Probing Confinement Effects on Multilayered Ferroelectric Polymer Films Using Second Harmonic Generation

2013 ◽  
Vol 1489 ◽  
Author(s):  
J. Jones ◽  
L. Zhu ◽  
N. Tolk ◽  
R. Mu
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Second Harmonic Generation ◽  
Harmonic Generation ◽  
Second Harmonic ◽  
Electrical Energy ◽  
High Energy ◽  
High Energy Density ◽  
Self Healing ◽  
Layered Systems

ABSTRACTElectrical energy storage plays a key role in mobile electronic devices, stationary power systems, and hybrid electrical vehicles. High energy density capacitors based on dielectric polymers are a focus of increasing research effort motivated by the possibility to realize compact and flexible energy storage devices, taking advantage of light weight and facile processability of organic materials. In addition, dielectric polymers enjoy inherent advantages of self-healing mechanism and high breakdown strength, leading to capacitors with great reliability and high energy density. It is the focus of this group to develop a multilayered ferroelectric PVDF system for improved energy storage efficiency. These systems are fabricated using enabling technology in co-extrusion which allows more cost effective and large area device production as opposed to more conventional layer-by-layer techniques. Many efforts have been made by the team to fabricate these micro- and nano-layered systems resulting in much improved device performance. A three-time improvement of capacitive electrical energy density has been demonstrated. The focus of this research is to understand the physics of why these multilayered systems perform better than a single layer by developing a characterization technique using both confocal second harmonic generation (SHG) and electric field induced second harmonic (EFISH) laser spectroscopy. Our results have shown that SHG is a very sensitive, non-destructive and versatile technique that can be used to study the ferroelectric and structural properties of layered systems. When combined with EFISH this technique allows the interrogation of structural and dielectric properties within the individual layers and at the interfaces between the layers. Further, the proposed techniques can be readily employed in-situ which can provide information in real time during sample processing with static and time-resolved spectroscopic measurements.

A self-healing Li-S redox flow battery with alternative reaction pathways

2021 ◽  
Author(s):  
Qiliang Chen ◽  
Wei Guo ◽  
Donghai Wang ◽  
Yongzhu Fu
Keyword(s):  
Energy Density ◽  
High Capacity ◽  
High Energy ◽  
High Energy Density ◽  
Reaction Pathways ◽  
Self Healing ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Redox Flow Batteries ◽  
Lithium Sulfur

Lithium-sulfur (Li-S) redox flow batteries (RFBs) have high energy density because of the high capacity of sulfur. To fully utilize its capacity, one key issue has to be overcome, i.e.,...

Sign in / Sign up

Export Citation Format

Share Document