Swirler effects on combustion instabilities analyzed with measured FDFs, injector impedances and damping rates

2022 ◽  
Vol 238 ◽  
pp. 111947
Author(s):  
Preethi Rajendram Soundararajan ◽  
Daniel Durox ◽  
Antoine Renaud ◽  
Guillaume Vignat ◽  
Sébastien Candel
Author(s):  
Pradip Xavier ◽  
Bruno Renou ◽  
Gilles Cabot ◽  
Mourad A. Boukhalfa ◽  
Michel Cazalens

This paper focuses on optimizing an innovative annular Lean Premixed staged burner, following the Trapped Vortex Combustor concept. The latter consists of a lean main flame stabilized by passing past a rich cavity pilot flame. Unfortunately, this configuration is highly sensitive to combustion instabilities and the flame is not well stabilized. This work consists of adjusting aerodynamic variables, chemical parameters and burner geometry to reach a “low-NOx” operation while reducing other pollutants and getting a stable flame. Results show that stability is reached when mass transfers between main and cavity zones are reduced. Then, the main bulk velocity is increased to reduce the cavity thermal expansion, due to the hot gas expansion. In addition, the cavity flow rate is reduced to prevent from penetrating and disturbing the main flow. Re-arranging injections in the cavity also avoid local unsteady equivalence ratios, which creates an unsteady heat release and combustion with pulses. Regarding NOx, a leaner main flame combined with a sufficiently rich cavity mixture creates local stoichiometric zones at the interface between the cavity and the main zone. The latter point is found to be a good anchoring mechanism. Compared with the original configuration, a stable point of operation is found: acoustic energy is reduced by an order of 100, NOx level is less than 0.4 g/kgfuel, CO is cut by 93% with no more Unburned Hydro-Carbons.


Sign in / Sign up

Export Citation Format

Share Document