scholarly journals Developing a new acoustic emission source classification criterion for concrete structures based on signal parameters

2022 ◽  
Vol 318 ◽  
pp. 126163
Author(s):  
Fengqiao Zhang ◽  
Yuguang Yang ◽  
Sonja A.A.M. Fennis ◽  
Max A.N. Hendriks
2020 ◽  
Vol 19 (6) ◽  
pp. 2063-2074 ◽  
Author(s):  
Fengqiao Zhang ◽  
Lotfollah Pahlavan ◽  
Yuguang Yang

Acoustic emission source localization is a promising monitoring technique for concrete structures. However, the accuracy of acoustic emission source localization is influenced by many factors, such as the presence of cracks, which are commonly observed in existing reinforced concrete structures. In this article, the acoustic emission source localization is evaluated using a numerical model with a total number of 11,827,200 independent simulated tests. In this work, the investigated influential factors include the presence of cracks, arrival time picking error, and senor layout. The accuracy of source localization is quantified by the characteristic error defined in this article. Using the proposed wave propagation properties, a relatively stable characteristic error of 150 mm is estimated in the detection zone with the maximum sensor spacing less than 1 m. The evaluation approach and simulated characteristic error are validated experimentally by comparing the 200 manually generated signals using hammer hits on a cracked concrete beam.


2019 ◽  
Vol 83 (1) ◽  
pp. 43-52 ◽  
Author(s):  
Felix Leaman ◽  
Steffen Hinderer ◽  
Ralph Baltes ◽  
Elisabeth Clausen ◽  
Brian Rieckhoff ◽  
...  

Ultrasonics ◽  
2012 ◽  
Vol 52 (5) ◽  
pp. 587-592 ◽  
Author(s):  
Tian He ◽  
Qiang Pan ◽  
Yaoguang Liu ◽  
Xiandong Liu ◽  
Dayong Hu

2012 ◽  
Vol 253-255 ◽  
pp. 399-402
Author(s):  
Xing Guo Wang

A assessment method on quality detected system was developed on cylinders inner wall coating through the hydraulic radial expansive load system and acoustic emission testing technology,. Put double probes linear position principle and uniform motion of load system together, and make curved positioning come true based on the technical principle of locating acoustic emission source. The disadvantage was solved that double probes can’t make acoustic emission source planar positioning. The result showed that this system can provide a precise identification and location; it has fast testing velocity and portable device.


2009 ◽  
Vol 126 (5) ◽  
pp. 2324-2330 ◽  
Author(s):  
R. Gangadharan ◽  
G. Prasanna ◽  
M. R. Bhat ◽  
C. R. L. Murthy ◽  
S. Gopalakrishnan

Sign in / Sign up

Export Citation Format

Share Document