scholarly journals Insights on applications of low-cost ceramic membranes in wastewater treatment: A mini-review

Author(s):  
S. Lakshmi Sandhya Rani ◽  
R. Vinoth Kumar
2017 ◽  
Vol 76 (4) ◽  
pp. 895-908 ◽  
Author(s):  
Yaser Rasouli ◽  
Mohsen Abbasi ◽  
Seyed Abdollatif Hashemifard

In this research, four types of low cost and high performance ceramic microfiltration (MF) membranes have been employed in an in-line adsorption–MF process for oily wastewater treatment. Mullite, mullite-alumina, mullite-alumina-zeolite and mullite-zeolite membranes were fabricated as ceramic MF membranes by low cost kaolin clay, natural zeolite and α-alumina powder. Powdered activated carbon (PAC) and natural zeolite powder in concentrations of 100–800 mg L−1 were used as adsorbent agent in the in-line adsorption–MF process. Performance of the hybrid adsorption–MF process for each concentration of PAC and natural zeolite powder was investigated by comparing quantity of permeation flux (PF) and total organic carbon (TOC) rejection during oily wastewater treatment. Results showed that by application of 400 mg L−1 PAC in the adsorption–MF process with mullite and mullite-alumina membranes, TOC rejection was enhanced up to 99.5% in comparison to the MF only process. An increasing trend was observed in PF by application of 100–800 mg L−1 PAC. Also, results demonstrated that the adsorption–MF process with natural zeolite powder has higher performance in comparison to the MF process for all membranes except mullite-alumina membranes in terms of PF. In fact, significant enhancement of PF and TOC rejection up to 99.9% were achieved by employing natural zeolite powder in the in-line adsorption–MF hybrid process.


2015 ◽  
Vol 184 ◽  
pp. 202-214 ◽  
Author(s):  
Abbas Mehrabadi ◽  
Rupert Craggs ◽  
Mohammed M. Farid

2020 ◽  
Vol 11 (1) ◽  
pp. 174
Author(s):  
Konstantinos P. Papadopoulos ◽  
Christina N. Economou ◽  
Athanasia G. Tekerlekopoulou ◽  
Dimitris V. Vayenas

Algal/cyanobacterial biofilm photobioreactors provide an alternative technology to conventional photosynthetic systems for wastewater treatment based on high biomass production and easy biomass harvesting at low cost. This study introduces a novel cyanobacteria-based biofilm photobioreactor and assesses its performance in post-treatment of brewery wastewater and biomass production. Two different supporting materials (glass/polyurethane) were tested to investigate the effect of surface hydrophobicity on biomass attachment and overall reactor performance. The reactor exhibited high removal efficiency (over 65%) of the wastewater’s pollutants (chemical oxygen demand, nitrate, nitrite, ammonium, orthophosphate, and total Kjeldahl nitrogen), while biomass per reactor surface reached 13.1 and 12.8 g·m−2 corresponding to 406 and 392 mg·L−1 for glass and polyurethane, respectively, after 15 days of cultivation. The hydrophilic glass surface favored initial biomass adhesion, although eventually both materials yielded complete biomass attachment, highlighting that cell-to-cell interactions are the dominant adhesion mechanism in mature biofilms. It was also found that the biofilm accumulated up to 61% of its dry weight in carbohydrates at the end of cultivation, thus making the produced biomass a suitable feedstock for bioethanol production.


Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1804
Author(s):  
Guangmin Ren ◽  
Hongtao Han ◽  
Yixuan Wang ◽  
Sitong Liu ◽  
Jianyong Zhao ◽  
...  

Photocatalysis holds great promise as an efficient and sustainable oxidation technology for application in wastewater treatment. Rapid progress developing novel materials has propelled photocatalysis to the forefront of sustainable wastewater treatments. This review presents the latest progress on applications of photocatalytic wastewater treatment. Our focus is on strategies for improving performance. Challenges and outlooks in this promising field are also discussed. We hope this review will help researchers design low-cost and high-efficiency photocatalysts for water treatment.


2014 ◽  
Vol 26 (7) ◽  
pp. 1873-1881 ◽  
Author(s):  
Siew-Teng Ong ◽  
Pei-Sin Keng ◽  
Siew-Ling Lee ◽  
Yung-Tse Hung

Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 935 ◽  
Author(s):  
Lakshmi Prasanna Lingamdinne ◽  
Jong-Soo Choi ◽  
Yu-Lim Choi ◽  
Jae-Kyu Yang ◽  
Janardhan Reddy Koduru ◽  
...  

Graphitic carbon oxide (GCO) and magnetic graphitic carbon oxide (MGCO) were prepared from sugar via optimized green activation by employing ozone oxidation, and applied to wastewater treatment. The maximal oxidation and adsorption yield of pollutants were achieved at pH 2.0−4.0, which is the optimized pH for ozone oxidation of GC to generate GCO. As-prepared GCO and MGCO were characterized using X-ray, infrared, and microscopic techniques. The MGCO has enough saturation magnetization (MS) of 41.38 emu g−1 for separation of the sorbent from the reaction medium by applying an external magnetic field. Batch adsorption of radioactive and heavy metals (Th(IV), Pb(II)), and a dye (methylene blue (MB)) using GCO and MGCO was evaluated by varying the adsorbent dose, equilibrium pH, contact time, initial metal and dye concentrations, and kinetics and isotherms. Adsorption kinetics and isotherm studies indicated that Th(IV), Pb(II), and MB adsorption were best described by pseudo-second-order kinetics and Langmuir isotherm with R2 (correlation coefficient) > 0.99, respectively. The maximum adsorption capacities for Th(IV), Pb(II), and MB were 52.63, 47.39, and 111.12 mg g−1 on GCO and 76.02, 71.94, and 76.92 mg g−1 on MGCO. GCO and MGCO are prospectively effective and low-cost adsorbents for ion removal in wastewater treatment. As prepared MGCO can be reused up to three cycles for Th(IV), Pb(II), and MB. This work provides fundamental information about the equilibrium adsorption isotherms and mechanisms for Th(IV), Pb(II), and MB on GCO and MGCO.


2021 ◽  
Vol 11 (23) ◽  
pp. 11194
Author(s):  
Urszula Gryczka ◽  
Zbigniew Zimek ◽  
Marta Walo ◽  
Dagmara Chmielewska-Śmietanko ◽  
Sylwester Bułka

Electron beam wastewater treatment is a very effective method for the destruction of organic and microbiological pollutants. The technology was implemented for municipal and textile industry wastewater treatment. Availability of electron accelerators characterized with different operation parameters make the technology applicable for different end-users and also for installation in confined spaces. In such a case, the design of wastewater irradiation room has to take into account the limited space available for shielding construction, which must restrict X-ray emission. Considering construction of an irradiation room for water treatment facility, it is important to focus not only on a stream formation for irradiation to achieve the desired electron penetration, but also on the reduction in x-ray generation. In the presented work, the X-ray field was tested, using modelling and experimental methods. The final results gave an advanced solution, which can be used in the installation of wastewater treatment, ballast and other types of origin, providing low cost shield and good radiation protection measures.


Sign in / Sign up

Export Citation Format

Share Document