scholarly journals 20-m resolution longitudinal nitrate data from before and after rainfall in low-order streams spanning rural to urban gradients

Data in Brief ◽  
2021 ◽  
pp. 107256
Author(s):  
Colleen Bradley ◽  
P. Zion Klos
Keyword(s):  
Before And After ◽  
Low Order

Vagal afferent activity increases dynamical dimension of respiration in rats

1991 ◽  
Vol 70 (4) ◽  
pp. 1748-1762 ◽  
Author(s):  
M. P. Sammon ◽  
E. N. Bruce
Keyword(s):  
Intact Animal ◽  
Initial Conditions ◽  
Respiratory Pattern ◽  
Adult Rats ◽  
Correlation Integral ◽  
Before And After ◽  
Respiratory Behavior ◽  
Volume Measurements ◽  
Generator Output ◽  
Low Order

Geometric and numerical techniques from nonlinear dynamics are employed to characterize the respiratory patterns of adult rats. In phase space constructions from volume measurements, the respiratory behavior of the vagotomized rat is seen to be unimodal and periodic, whereas that of the vagi-intact animal is bimodal and sensitive to initial conditions and displays stretching and folding of trajectories. By use of the correlation integral, the dimension and entropy were estimated for the respiratory patterns of five urethan-anesthetized rats (before and after vagotomy) and two awake animals (resting, vagi intact only). The results indicate that the central respiratory pattern of the anesthetized vagotomized rat behaves primarily as a single degree-of-freedom oscillator, which can be moved into a regime of low-order chaos in the presence of feedback from pulmonary stretch receptors, contributing significantly to the variability observed in the respiratory pattern of the vagi-intact animal. A model designed to emulate the Hering-Breuer inflation reflex demonstrates that the inspiration-inhibiting action of the reflex interacting with the oscillator at a critical phase transition is sufficient to drive the central pattern generator output into low-order chaos.

Damage Identification of Plane Truss Structure According to Square Difference in Elemental Modal Strain

2015 ◽  
Vol 724 ◽  
pp. 22-27
Author(s):  
Wei Ran Liu ◽  
Shou Jun Du ◽  
Li Mei Zhang
Keyword(s):  
Damage Identification ◽  
Truss Structure ◽  
Truss Structures ◽  
Severe Damage ◽  
Damage Location ◽  
Damage Degree ◽  
Before And After ◽  
Simulation Results ◽  
Low Order

A method based on the square difference of elemental modal strain was proposed to determine the damage location and damage degree. The square difference of elemental modal strain was expressed damage before and after. Simulation results show that: this method is effective to locate the single, multiple damages and light, severe damage with low-order modal information. Damage degrees can be initially determined by the values of the square difference of damaged-element modal strain. Furthermore, the result also shows that this method can accurately identify the damage location of plane truss structures with noise.

Low-Order Network Modeling for Annular Combustors Exhibiting Longitudinal and Circumferential Modes

2018 ◽  
Author(s):  
Dong Yang ◽  
Aimee S. Morgans
Keyword(s):  
Boundary Conditions ◽  
Acoustic Waves ◽  
Acoustic Boundary Conditions ◽  
Thermoacoustic Instability ◽  
Longitudinal Modes ◽  
Before And After ◽  
Flame Response ◽  
Annular Combustor ◽  
Set Up ◽  
Low Order

Modern gas turbine combustors often have annular geometries. These are able to sustain thermoacoustic modes which vary in both the longitudinal and circumferential directions. Effects such as nonlinearity of the flame response to perturbations and differing burners around the annulus lead to the coupling of acoustic modes with different circumferential mode numbers. Such coupling renders differing spatial patterns of instability possible — for example purely longitudinal modes, circumferential standing modes, circumferential spinning modes, mixed modes and slanted modes. Accurately predicting the spatial pattern of limit cycle oscillations resulting from thermoacoustic instability remains an open challenge. This work develops a frequency domain low-order thermoacoustic network model for annular combustors which is notable in (i) accounting for both longitudinal and circumferential modes and (ii) allowing for generic acoustic boundary conditions at either end of the network. Linear acoustic waves are considered, with the different circumferential wavenumbers decoupled for sections both before and after the flames. Modal coupling occurs only at the flames, and is accounted for by summing all modal contributions prior to application of the flame models, and decomposing back into circumferential modes after application of flow conservation equations across the flames. By applying acoustic boundary conditions at either end of the network, an eigenvalue system is established which allows the thermoacoustic modes of the whole combustion system to be analysed. This low order modelling approach is applied to a simplified annular combustor set-up and is demonstrated to be able to capture limit cycles exhibiting longitudinal modes, circumferential spinning modes, circumferential standing modes and even the recently identified slanted modes.

the effects of resonance with Jupiter in the system of short-period comets

1974 ◽  
Vol 22 ◽  
pp. 193-203
Author(s):  
L̆ubor Kresák
Keyword(s):  
Structural Effects ◽  
Order Resonance ◽  
Mean Motion ◽  
Short Period ◽  
The Mean ◽  
Compound Effect ◽  
Low Order

AbstractStructural effects of the resonance with the mean motion of Jupiter on the system of short-period comets are discussed. The distribution of mean motions, determined from sets of consecutive perihelion passages of all known periodic comets, reveals a number of gaps associated with low-order resonance; most pronounced are those corresponding to the simplest commensurabilities of 5/2, 2/1, 5/3, 3/2, 1/1 and 1/2. The formation of the gaps is explained by a compound effect of five possible types of behaviour of the comets set into an approximate resonance, ranging from quick passages through the gap to temporary librations avoiding closer approaches to Jupiter. In addition to the comets of almost asteroidal appearance, librating with small amplitudes around the lower resonance ratios (Marsden, 1970b), there is an interesting group of faint diffuse comets librating in characteristic periods of about 200 years, with large amplitudes of about±8% in μ and almost±180° in σ, around the 2/1 resonance gap. This transient type of motion appears to be nearly as frequent as a circulating motion with period of revolution of less than one half that of Jupiter. The temporary members of this group are characteristic not only by their appearance but also by rather peculiar discovery conditions.

Deformation Replication

1970 ◽  
Vol 28 ◽  
pp. 280-281
Author(s):  
J. Temple Black
Keyword(s):  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Rake Face ◽  
Orthogonal Machining ◽  
Aluminum Chips ◽  
Before And After ◽  
Materials Used ◽  
Glass Knife ◽  
Very High

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.

The Clinical, Roentgenological and Morphological Effects of an Acute Exposure of Phosgene on the Lungs of Dogs

1971 ◽  
Vol 29 ◽  
pp. 236-237
Author(s):  
R. F. Bils ◽  
W. F. Diller ◽  
F. Huth
Keyword(s):  
Latent Period ◽  
Chemical Industry ◽  
Toxic Substance ◽  
Lung Edema ◽  
X Rays ◽  
Beagle Dogs ◽  
Male And Female ◽  
Morphological Alterations ◽  
Before And After ◽  
Electron Microscopes

Phosgene still plays an important role as a toxic substance in the chemical industry. Thiess (1968) recently reported observations on numerous cases of phosgene poisoning. A serious difficulty in the clinical handling of phosgene poisoning cases is a relatively long latent period, up to 12 hours, with no obvious signs of severity. At about 12 hours heavy lung edema appears suddenly, however changes can be seen in routine X-rays taken after only a few hours' exposure (Diller et al., 1969). This study was undertaken to correlate these early changes seen by the roengenologist with morphological alterations in the lungs seen in the'light and electron microscopes.Forty-two adult male and female Beagle dogs were selected for these exposure experiments. Treated animals were exposed to 94.5-107-5 ppm phosgene for 10 min. in a 15 m3 chamber. Roentgenograms were made of the thorax of each animal before and after exposure, up to 24 hrs.

Ultrastructure of Melanin Formation in Curvularia sp., Alternaria sp., and Drechslera Sorokiniana

1977 ◽  
Vol 35 ◽  
pp. 398-399
Author(s):  
M. H. Wheeler ◽  
W. J. Tolmsoff ◽  
A. A. Bell
Keyword(s):  
Potassium Phosphate ◽  
Thielaviopsis Basicola ◽  
Wild Type ◽  
Potassium Phosphate Buffer ◽  
Transmission Microscopy ◽  
Electron Transmission ◽  
Melanin Formation ◽  
Before And After ◽  
Alternaria Sp ◽  
Electron Transmission Microscopy

(+)-Scytalone [3,4-dihydro-3,6,8-trihydroxy-l-(2Hj-naphthalenone] and 1,8-di- hydroxynaphthalene (DHN) have been proposed as intermediates of melanin synthesis in the fungi Verticillium dahliae (1, 2, 3, 4) and Thielaviopsis basicola (4, 5). Scytalone is enzymatically dehydrated by V. dahliae to 1,3,8-trihydroxynaphthalene which is then reduced to (-)-vermelone [(-)-3,4- dihydro-3,8-dihydroxy-1(2H)-naphthalenone]. Vermelone is subsequently dehydrated to DHN which is enzymatically polymerized to melanin.Melanin formation in Curvularia sp., Alternaria sp., and Drechslera soro- kiniana was examined by light and electron-transmission microscopy. Wild-type isolates of each fungus were compared with albino mutants before and after treatment with 1 mM scytalone or 0.1 mM DHN in 50 mM potassium phosphate buffer, pH 7.0. Both chemicals were converted to dark pigments in the walls of hyphae and conidia of the albino mutants. The darkened cells were similar in appearance to corresponding cells of the wild types under the light microscope.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

The Precipitation of Si in AlCuSi Thin Films

1973 ◽  
Vol 31 ◽  
pp. 34-35 ◽  
Author(s):  
R. M. Anderson
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Heat Treatment ◽  
Solid Solution ◽  
Integrated Circuit ◽  
Copper Film ◽  
Solution Concentration ◽  
X Ray ◽  
Silicon Thin Films ◽  
Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

An Electron Microscope Study of Interdiffusion and Compound Formation in Ta-Au Thin Films

1973 ◽  
Vol 31 ◽  
pp. 32-33 ◽  
Author(s):  
T. C. Tisone ◽  
S. Lau
Keyword(s):  
Electron Microscope ◽  
Electron Microscope Study ◽  
Thermally Grown Oxide ◽  
Ion Milling ◽  
Compound Formation ◽  
Technology Application ◽  
Transmission Electron ◽  
Before And After ◽  
Au Thin Films

In a study of the properties of a Ta-Au metallization system for thin film technology application, the interdiffusion between Ta(bcc)-Au, βTa-Au and Ta2M-Au films was studied. Considered here is a discussion of the use of the transmission electron microscope(TEM) in the identification of phases formed and characterization of the film microstructures before and after annealing.The films were deposited by sputtering onto silicon wafers with 5000 Å of thermally grown oxide. The film thicknesses were 2000 Å of Ta and 2000 Å of Au. Samples for TEM observation were prepared by ultrasonically cutting 3mm disks from the wafers. The disks were first chemically etched from the silicon side using a HNO3 :HF(19:5) solution followed by ion milling to perforation of the Au side.

Sign in / Sign up

Export Citation Format

Share Document