How to minimize the embodied environmental impact of green building envelope? An automatic optimization method

2022 ◽  
Vol 93 ◽  
pp. 106732
Author(s):  
Xiaoxiao Xu ◽  
Peiyu Xu ◽  
Jianjun Zhu ◽  
Jiayu Liu ◽  
Qian Xue
Keyword(s):  
Environmental Impact ◽  
Green Building ◽  
Optimization Method ◽  
Building Envelope ◽  
Automatic Optimization

scholarly journals Quantitative Analysis and Multi-Index Evaluation of the Green Building Envelope Performance in the Cold Area of China

2020 ◽  
Vol 12 (1) ◽  
pp. 437 ◽  
Author(s):  
Shilei Lu ◽  
Zichen Wang ◽  
Tianshuai Zhang
Keyword(s):  
Environmental Impact ◽  
Thermal Performance ◽  
Evaluation Model ◽  
Green Building ◽  
Green Buildings ◽  
Building Envelope ◽  
Heat Consumption ◽  
Multi Index ◽  
Index Evaluation ◽  
Cold Area

In China, relevant standards about building energy efficiency and green buildings have resulted in corresponding requirements for the envelope thermal performance. However, improvement of the thermal performance of the envelope is accompanied by an increase of the environmental impact and cost. This study quantitatively analyzed the thermal performance, environmental impact, and cost of the green building envelope in cold areas and established a common practice database, as well as a multi-index evaluation model. The results show that the best thermal performance improvements are 40% in residential buildings and 30% in public buildings, respectively, based on the relevant standards. The exterior walls and windows have the greatest impact on building heat consumption. There is no significant correlation between the heat consumption and the comprehensive heat transfer coefficient of 10 green buildings. Therefore, the comprehensive heat loss coefficient is corrected. The verification results show that all errors except project 10 are within 15%. Additionally, the projects with balanced thermal performance improvement of exterior walls and windows showed a better performance. Finally, the best combination of residential building envelopes in the cold area was selected, using the evaluation model and quantitative database to calculate the comprehensive score.

scholarly journals Energy Performance of a High-Rise Residential Building Using Fibre-Reinforced Structural Lightweight Aggregate Concrete

2020 ◽  
Vol 10 (13) ◽  
pp. 4489
Author(s):  
Zakaria Che Muda ◽  
Payam Shafigh ◽  
Norhayati Binti Mahyuddin ◽  
Samad M.E. Sepasgozar ◽  
Salmia Beddu ◽  
...  
Keyword(s):  
Residential Building ◽  
Green Building ◽  
Lightweight Aggregate ◽  
Energy Performance ◽  
Building Envelope ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
High Rise ◽  
Passive Design ◽  
Envelope Material

The increasing need for eco-friendly green building and creative passive design technology in response to climatic change and global warming issues will continue. However, the need to preserve and sustain the natural environment is also crucial. A building envelope plays a pivotal role in areas where the greatest heat and energy loss often occur. Investment for the passive design aspect of building envelopes is essential to address CO 2 emission. This research aims to explore the suitability of using integral-monolithic structural insulation fibre-reinforced lightweight aggregate concrete (LWAC) without additional insulation as a building envelope material in a high-rise residential building in the different climatic zones of the world. Polypropylene and steel fibres in different dosages were used in a structural grade expanded clay lightweight aggregate concrete. Physical and thermal properties of fibre reinforced structural LWAC, normal weight concrete (NWC) and bricks were measured in the lab. The Autodesk@Revit-GBS simulation program was implemented to simulate the energy consumption of a 29-storey residential building with shear wall structural system using the proposed fibre-reinforced LWAC materials. Results showed that energy savings between 3.2% and 14.8% were incurred in buildings using the fibre-reinforced LWAC across various climatic regions as compared with traditional NWC and sand-cement brick and clay brick walls. In conclusion, fibre-reinforced LWAC in hot-humid tropical and temperate Mediterranean climates meet the certified Green Building Index (GBI) requirements of less than 150 kW∙h∙m−2. However, in extreme climatic conditions of sub-arctic and hot semi-arid desert climates, a thicker wall or additional insulation is required to meet the certified green building requirements. Hence, the energy-saving measure is influenced largely by the use of fibre-reinforced LWAC as a building envelope material rather than because of building orientation.

scholarly journals A New Approach for Automatic Optimization of Complex Fracture Network in Shale Reservoirs

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 1) ◽  
Author(s):  
Haibo Wang ◽  
Tong Zhou ◽  
Fengxia Li
Keyword(s):  
Shale Gas ◽  
Flow Model ◽  
Optimization Method ◽  
Fracture Network ◽  
Gas Reservoirs ◽  
Fracture Length ◽  
Complex Fracture ◽  
Shale Gas Reservoirs ◽  
Automatic Optimization ◽  
Complex Fracture Network

Abstract Shale gas reservoirs have gradually become the main source for oil and gas production. The automatic optimization technology of complex fracture network in fractured horizontal wells is the key technology to realize the efficient development of shale gas reservoirs. In this paper, based on the flow model of shale gas reservoirs, the porosity/permeability of the matrix system and natural fracture system is characterized. The fracture network morphology is finely characterized by the fracture network expansion calculation method, and the flow model was proposed and solved. On this basis, the influence of matrix permeability, matrix porosity, fracture permeability, fracture porosity, and fracture length on the production of shale gas reservoirs is studied. The optimal design of fracture length and fracture location was carried, and the automatic optimization method of complex fracture network parameters based on simultaneous perturbation stochastic approximation (SPSA) was proposed. The method was applied in a shale gas reservoir, and the results showed that the proposed automatic optimization method of the complex fracture network in shale gas reservoirs can automatically optimize the parameters such as fracture location and fracture length and obtain the optimal fracture network distribution matching with geological conditions.

Going Biophilic

Urban Health ◽  
2019 ◽  
pp. 369-374 ◽  
Author(s):  
Jie Yin ◽  
John D. Spengler
Keyword(s):  
Environmental Impact ◽  
Water Storage ◽  
Green Building ◽  
Building Design ◽  
Environmental Benefits ◽  
Green Building Design ◽  
Environmental Perturbation ◽  
Global Force ◽  
Challenges And Opportunities ◽  
Reducing Energy

Green building design has emerged as a global force, with one green building standard reporting more than 3.5 billion square feet certified worldwide. Green buildings focus on reducing environmental impact through improved water storage, reducing environmental perturbation, and reducing energy usage. Although the environmental benefits of green building design are now well established, it is only more recently that the field has come to appreciate the health benefits of green building design. This chapter discusses the green building movement and the challenges and opportunities it represents, with lessons that can be learned and are generalizable to urban health scholarship and action worldwide.

In Situ Measurement of Thermal Resistance of Building Envelope at the Residential Occupancy in Indonesia

2015 ◽  
Vol 771 ◽  
pp. 191-194 ◽  
Author(s):  
Wahyu Sujatmiko ◽  
Hermawan Kresno Dipojono ◽  
F.X. Nugroho Soelami ◽  
Soegijanto
Keyword(s):  
Thermal Resistance ◽  
High Performance ◽  
Building Materials ◽  
Precast Concrete ◽  
Green Building ◽  
Building Envelope ◽  
Building Wall ◽  
Ashrae Standards ◽  
Building Walls

Abstract. This paper presents the measurement results of three building wall materials which are commonly used for residential housings in Indonesia, namely clay brick, batako (concrete brick), and precast concrete. In-situ measurement of the steady state thermal flow (heat flux) at building walls (envelopes) is conducted in order to determine the thermal resistance of building wall according to ASTM C1155. The results show that all three building materials having a thermal resistance values are far below the energy conservation provisions of ASHRAE 90.1 and especially when compared to the provision of high performance green building ASHRAE 189.1 It is found that precast concrete has higher thermal resistance (or has lower thermal conductivity) than that of other two materials, hence a better compliance to the ASHRAE standards.

scholarly journals Envelope Thermal Performance Analysis Based on Building Information Model (BIM) Cloud Platform—Proposed Green Mark Collaboration Environment

Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 586 ◽  
Author(s):  
Ziwen Liu ◽  
Qian Wang ◽  
Vincent J.L. Gan ◽  
Luke Peh
Keyword(s):  
Thermal Performance ◽  
Green Building ◽  
Building Envelope ◽  
Information Modeling ◽  
Future Research ◽  
Building Information Model ◽  
Architectural Engineering ◽  
Collaboration Environment ◽  
Building Information

Building Information Modeling (BIM) and sustainable buildings are two future cornerstones of the Architectural, Engineering and Construction (AEC) industry. In Singapore’s context, the Green Mark (GM) scoring system is prevalently used to assess the sustainability index of green buildings. BIM provides the semantic and geometry information of buildings, which is proliferated as the technological and process backbone for the green building assessment. This research, through vast literature reviews, identified that the current procedure of achieving a Green Mark score is tedious and cumbersome, which hampers productivity, especially in the calculation of building envelope thermal performance. Furthermore, the project stakeholders work in silos, in a non-collaborative, manual and 2D-based environment for generating relevant documentation to achieve the requisite green mark score. To this end, a cloud-based BIM platform was developed, with the aim of encouraging project stakeholders to collaboratively generate the project’s green mark score digitally in accordance with the regulatory requirements. Through this research, the authors have validated the Envelope Thermal Transfer Value (ETTV) calculation, which is one of the prerequisite criteria to achieve a Green Mark score, through a case study using the developed cloud-based BIM platform. The results indicated that using the proposed platform enhances the productivity and accuracy as far as ETTV calculation is concerned. This study provides a basis for future research in implementing the proposed platform for other criteria under the Green Mark Scheme.

scholarly journals BIM-VE-Based Optimization of Green Building Envelope from the Perspective of both Energy Saving and Life Cycle Cost

2020 ◽  
Vol 12 (19) ◽  
pp. 7862
Author(s):  
Zhenmin Yuan ◽  
Jianliang Zhou ◽  
Yaning Qiao ◽  
Yadi Zhang ◽  
Dandan Liu ◽  
...  
Keyword(s):  
Life Cycle ◽  
Energy Saving ◽  
Life Cycle Cost ◽  
Architectural Design ◽  
Green Building ◽  
Building Energy ◽  
Green Buildings ◽  
Building Envelope ◽  
Analysis Model ◽  
Mathematical Formula

In the context of the increasingly severe energy crisis and global warming, green buildings and their energy-saving issues are being paid more attention in the world. Since envelope optimization can significantly reduce the energy consumption of green buildings, value engineering (VE) technology and building information modeling (BIM) technology are used to optimize the envelope of green buildings, which takes into account both energy saving and life cycle cost. The theoretical framework of optimization for green building envelope based on BIM-VE is proposed, including a BIM model for architecture, a life cycle cost analysis model, energy-saving analysis model, and a value analysis model. In the life-cycle cost model, a mathematical formula for the life-cycle cost is established, and BIM technology is used to generate a bill of quantity. In the energy-saving analysis model, a mathematical formula for energy saving is established, and BIM technology is used for the building energy simulation. In the scheme decision-making sub-model, VE technology integrating life cycle cost with energy saving is used to assess the envelope schemes and select the optimal one. A prefabricated project case is used to simulate and test the established methodology. The important results show that the 16 envelope schemes make the 16 corresponding designed buildings meet the green building evaluation standards, and the optimal envelope scheme is the “energy-saving and anti-theft door + exterior window 2+ floor 1+ exterior wall 1 + inner shear wall + inner partition wall 2 + planted roof” with the value 10.80 × 10−2 MW·h/ten thousand yuan. A significant finding is that the value generally rises with the increase of energy-saving rate while the life cycle cost is irregular with the increase of energy-saving rate. Compared with previous efforts in the literature, this study introduces VE technology into architectural design to further expand the current boundary of building energy-saving theory. The findings and suggestions will provide a valuable reference and guidance for the architectural design industry to optimize the envelope of green buildings from the perspective of both energy saving and life cycle cost.

Sign in / Sign up

Export Citation Format

Share Document