On-site measured emission factors of polycyclic aromatic hydrocarbons for different types of marine vessels

2021 ◽  
pp. 118782
Author(s):  
Lizhi Wang ◽  
Wei Du ◽  
Xiao Yun ◽  
Yuanchen Chen ◽  
Xi Zhu ◽  
...  
2020 ◽  
Vol 20 (24) ◽  
pp. 16135-16144
Author(s):  
András Hoffer ◽  
Beatrix Jancsek-Turóczi ◽  
Ádám Tóth ◽  
Gyula Kiss ◽  
Anca Naghiu ◽  
...  

Abstract. It is a common practice in developing countries and in some regions of Europe that solid wastes generated in households (e.g. plastic beverage packaging and other plastic wastes, textile wastes, fibreboards, furniture, tyres, and coloured-paper waste) are burned in wood- or coal-fired stoves during the winter months. In Europe, the types and volume of municipal waste burned in households is virtually unknown because these activities are illegal and not recorded, with the exception of a few media reports or court cases. Even though particulate emissions from illegal waste burning pose a significant hazard to human health due to the combination of excessive emission factors (EFs) and uncontrolled chemical composition, there is scarce information on the specific EFs for PM10 and polycyclic aromatic hydrocarbons (PAHs) in the scientific literature. In this work, controlled combustion tests were performed with 12 different types of municipal solid waste, and particulate emissions were measured and collected for chemical analysis. Absolute EFs for PM10 and PAHs as well as the benzo(a)pyrene (BaP) toxicity equivalent of the latter are reported for the first time for the indoor combustion of 12 common types of municipal solid waste that are frequently burned in households worldwide. It was found that the PM10 emission factors from the combustion of wood-based waste samples were about twice that of firewood, whereas EFs in the range of 11–82 mg g−1 (a factor of 5–40 times higher than that of dry firewood under the same conditions) were obtained for different types of plastic waste. The latter were also found to emit exceptionally high quantities of PAHs, by a factor of 50–750 more than upon the combustion of dry firewood under the same conditions. Since the more toxic 4–6 ring PAHs were predominant in the particulate emission from plastic waste burning, BaP equivalent toxicity was up to 4100 times higher than that from wood combustion.


Atmosphere ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1129
Author(s):  
Xinghua Li ◽  
Zihao Wang ◽  
Tailun Guo

Field measured PAH emissions from diverse sources in China are limited or even not available. In this study, the PM2.5-bound PAH emission factors (EFs) for typical biomass and coal combustion in China were determined on-site. The measured total PAH EFs were 24.5 mg/kg for household coal burning, 10.5–13.9 mg/kg for household biofuel burning, 8.1–8.6 mg/kg for biomass open burning, and 0.021–0.31 mg/kg for coal-fired boilers, respectively. These EF values were compared with previous studies. The sources profiles of PAHs for four sources were developed to use in chemical mass balance receptor modelling. BaP equivalent EFs (EFBaPeq) were calculated to evaluate PAH emission toxicity among different combustion sources, and were 6.81, 2.94–4.22, 1.59–3.62, and 0.0006–0.042 mg/kg for those four types of sources, respectively.


Sign in / Sign up

Export Citation Format

Share Document