Nanofluids based on hydrolyzed polyacrylamide and aminated graphene oxide for enhanced oil recovery in different reservoir conditions

Fuel ◽  
2022 ◽  
Vol 310 ◽  
pp. 122299
Author(s):  
Cláudia K.B. de Vasconcelos ◽  
Felipe S. Medeiros ◽  
Bruna R.S. Diniz ◽  
Marcelo M. Viana ◽  
Vinicius Caliman ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Reservoir Conditions ◽  
Hydrolyzed Polyacrylamide

Improving the Viscosity of Partially Hydrolyzed Polyacrylamide (PHPAM) Solution for Enhanced Oil Recovery (EOR) Application

2021 ◽  
Vol 874 ◽  
pp. 45-49
Author(s):  
Ihsan Arifin ◽  
Grandprix Thomryes Marth Kadja ◽  
Cynthia L. Radiman
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Average Molecular Weight ◽  
Monomer Concentration ◽  
Water Soluble ◽  
Water Soluble Polymer ◽  
Produce Water ◽  
Water Soluble Polymers ◽  
Hydrolysis Method ◽  
Hydrolyzed Polyacrylamide

Enhanced Oil Recovery (EOR) is a promising technology for increasing crude oil production, especially from old wells. Polymer flooding is one of the techniques used in EOR in which the water-soluble polymer is added to increase the viscosity of the injected fluid. However, this technique has not been implemented in Indonesia due to the unavailability of locally-synthesized polymers. Therefore, this research aims to synthesize polyacrylamides and their partially-hydrolyzed derivatives and to study the possibility of their utilization for the EOR application. Various polymerization conditions using potassium persulfate (KPS) as initiators have been realized and the resulting polymers were characterized using FTIR spectroscopy and rheology measurement. It was found that higher monomer concentration resulted in higher viscosity-average molecular weight of polyacrylamide. Further study revealed that the hydrolysis of polyacrylamide by alkaline solution significantly increased the viscosity of 1000 ppm solution from 1.5 to 145.40 cP at room temperature, which is comparable to one of the commercial products. These results showed that the simple synthesis and hydrolysis method could be effectively used to produce water-soluble polymers for the EOR application.

Self-gasified biosystems for enhanced oil recovery

2021 ◽  
pp. 2150274
Author(s):  
B. A. Suleimanov ◽  
S. J. Rzayeva ◽  
U. T. Akhmedova
Keyword(s):  
Carbon Dioxide ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Experimental Studies ◽  
Microbial Enhanced Oil Recovery ◽  
Heterogeneous Porous Medium ◽  
Oil Displacement ◽  
Subcritical Region ◽  
Reservoir Conditions

Microbial enhanced oil recovery is considered to be one of the most promising methods of stimulating formation, contributing to a higher level of oil production from long-term fields. The injection of bioreagents into a reservoir results in the creation of oil-displacing agents along with a significant amount of gases, mainly carbon dioxide. Earlier, the authors failed to study the preparation of self-gasified biosystems and the implementation of the subcritical region (SR) under reservoir conditions. Gasified systems in the subcritical phase have better oil-displacing properties than nongasified systems. In a heterogeneous porous medium, the filtration profile of gasified liquids in the SR should be more uniform than for a degassed liquid. Based on experimental studies, the superior efficiency of oil displacement by gasified biosystems compared with degassed ones has been demonstrated. The possibility of efficient use of gasified hybrid biopolymer systems has been shown.

Temperature Dependence of the Shear-Thinning Behavior o Partially Hydrolyzed Polyacrylamide Solution for Enhanced Oil Recovery

2020 ◽  
Vol 143 (6) ◽  
Author(s):  
Pan-Sang Kang ◽  
Jong-Se Lim ◽  
Chun Huh
Keyword(s):  
Temperature Dependence ◽  
Polymer Solution ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Polymer Concentration ◽  
Shear Thinning ◽  
Temperature Model ◽  
Polyacrylamide Solution ◽  
Partially Hydrolyzed Polyacrylamide ◽  
Hydrolyzed Polyacrylamide

Abstract The viscosity of injection fluid is a critical parameter that should be considered for the design and evaluation of polymer flood, which is an effective and popular technique for enhanced oil recovery (EOR). It is known that the shear-thinning behavior of EOR polymer solutions is affected by temperature. In this study, temperature dependence (25–70 °C) of the viscosity of a partially hydrolyzed polyacrylamide solution, the most widely used EOR polymer for oil field applications, was measured under varying conditions of the polymer solution (polymer concentration: 500–3000 ppm, NaCl salinity: 1000–10,000 ppm). Under all conditions of the polymer solution, it was observed that the viscosity decreases with increasing temperature. The degree of temperature dependence, however, varies with the conditions of the polymer solution. Martin model and Lee correlations were used to estimate the dependence of the viscosity of the polymer solution on the polymer concentration and salinity. In this study, we proposed a new empirical model to better elucidate the temperature dependence of intrinsic viscosity. Analysis of the measured viscosities shows that the accuracy of the proposed temperature model is higher than that of the existing temperature model.

scholarly journals Comparative Study of Green and Synthetic Polymers for Enhanced Oil Recovery

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2429
Author(s):  
Nasiru Salahu Muhammed ◽  
Md. Bashirul Haq ◽  
Dhafer Al-Shehri ◽  
Mohammad Mizanur Rahaman ◽  
Alireza Keshavarz ◽  
...  
Keyword(s):  
Comparative Study ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Pilot Scale ◽  
Limited Information ◽  
Polymer Flood ◽  
Hydrolyzed Polyacrylamide ◽  
Physical And Chemical ◽  
Inaccessible Pore Volume ◽  
Petrochemical Engineering

Several publications by authors in the field of petrochemical engineering have examined the use of chemically enhanced oil recovery (CEOR) technology, with a specific interest in polymer flooding. Most observations thus far in this field have been based on the application of certain chemicals and/or physical properties within this technique regarding the production of 50–60% trapped (residual) oil in a reservoir. However, there is limited information within the literature about the combined effects of this process on whole properties (physical and chemical). Accordingly, in this work, we present a clear distinction between the use of xanthan gum (XG) and hydrolyzed polyacrylamide (HPAM) as a polymer flood, serving as a background for future studies. XG and HPAM have been chosen for this study because of their wide acceptance in relation to EOR processes. To this degree, the combined effect of a polymer’s rheological properties, retention, inaccessible pore volume (PV), permeability reduction, polymer mobility, the effects of salinity and temperature, and costs are all investigated in this study. Further, the generic screening and design criteria for a polymer flood with emphasis on XG and HPAM are explained. Finally, a comparative study on the conditions for laboratory (experimental), pilot-scale, and field-scale application is presented.

The Effect of Phase Equilibria on the CO2 Displacement Mechanism

1979 ◽  
Vol 19 (04) ◽  
pp. 242-252 ◽  
Author(s):  
R.S. Metcalfe ◽  
Lyman Yarborough
Keyword(s):  
Carbon Dioxide ◽  
Phase Equilibria ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Miscible Displacement ◽  
Co2 Flooding ◽  
Recovery Method ◽  
Two Fluids ◽  
Reservoir Conditions

Abstract Carbon dioxide flooding under miscible conditions is being developed as a major process for enhanced oil recovery. This paper presents results of research studies to increase our understanding of the multiple-contact miscible displacement mechanism for CO2 flooding. Carbon dioxide displacements of three synthetic oils of increasing complexity (increasing number of hydrocarbon components) are described. The paper concentrates on results of laboratory flow studies, but uses results of phase-equilibria and numerical studies to support the conclusions.Results from studies with synthetic oils show that at least two multiple-contact miscible mechanisms, vaporization and condensation, can be identified and that the phase-equilibria data can be used as a basis for describing the mechanism. The phase-equilibria change with varying reservoir conditions, and the flow studies show that the miscible mechanism depends on the phase-equilibria behavior. Qualitative predictions with mathematical models support our conclusions.Phase-equilibria data with naturally occurring oils suggest the two mechanisms (vaporization and condensation) are relevant to CO2 displacements at reservoir conditions and are a basis for specifying the controlling mechanisms. Introduction Miscible-displacement processes, which rely on multiple contacts of injected gas and reservoir oil to develop an in-situ solvent, generally have been recognized by the petroleum industry as an important enhanced oil-recovery method. More recently, CO2 flooding has advanced to the position (in the U.S.) of being the most economically attractive of the multiple-contact miscibility (MCM) processes. Several projects have been or are currently being conducted either to study or use CO2 as an enhanced oil-recovery method. It has been demonstrated convincingly by Holm and others that CO2 can recover oil from laboratory systems and therefore from the swept zone of petroleum reservoirs using miscible displacement. However, several contradictions seem to exist in published results.. These authors attempt to establish the mechanism(s) through which CO2 and oil form a miscible solvent in situ. (The solvent thus produced is capable of performing as though the two fluids were miscible when performing as though the two fluids were miscible when injected.) In addition, little experimental work has been published to provide support for the mechanisms of multiple-contact miscibility, as originally discussed by Hutchinson and Braun.One can reasonably assume that the miscible CO2 process will be related directly to phase equilibria process will be related directly to phase equilibria because it involves intimate contact of gases and liquids. However, no data have been published to indicate that the mechanism for miscibility development may differ for varying phase-equilibria conditions.This paper presents the results of both flow and phase-equilibria studies performed to determine the phase-equilibria studies performed to determine the mechanism(s) of CO2 multiple-contact miscibility. These flow studies used CO2 to displace three multicomponent hydrocarbon mixtures under first-contact miscible, multiple-contact miscible, and immiscible conditions. Results are presented to support the vaporization mechanism as described by Hutchinson and Braun, and also to show that more than one mechanism is possible with CO2 displacements. The reason for the latter is found in the results of phase-equilibria studies. SPEJ P. 242

Extractive Capacity of CO2 in Oil Saturated Porous Media

2012 ◽  
Vol 524-527 ◽  
pp. 1807-1810
Author(s):  
Hao Chen ◽  
Sheng Lai Yang ◽  
Fang Fang Li ◽  
San Bo Lv ◽  
Zhi Lin Wang
Keyword(s):  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Oil Production ◽  
Supercritical Condition ◽  
Experimental Results ◽  
Water Flooding ◽  
Saturated Porous Media ◽  
Reservoir Conditions

CO2 flooding process has been a proven valuable tertiary enhanced oil recovery (EOR) technique. In this paper, experiment on extractive capacity of CO2 in oil saturated porous media was conducted under reservoir conditions. The main objectives of the study are to evaluate extractive capacity of CO2 in oil saturated natural cores and improve understanding of the CO2 flooding mechanisms, especially in porous media conditions. Experimental results indicated that oil production decreases while GOR increases with extractive time increases. the changes of the color and state of the production oil shows that oil component changes from light to heavy as extractive time increases. In addition, no oil was produced by water flooding after extractive experiment. Based on the experimental results and phenomena, the main conclusion drawn from this study is that under supercritical condition, CO2 has very powerful extractive capacity. And the application of CO2 flooding is recommended for enhancing oil recovery.

Sign in / Sign up

Export Citation Format

Share Document