Application of magnetic chitosan nanocomposites modified by graphene oxide and polyethyleneimine for removal of toxic heavy metals and dyes from water

2021 ◽  
Vol 192 ◽  
pp. 118-125
Author(s):  
Yongxue Li ◽  
Xinyi Dong ◽  
Longshan Zhao
2020 ◽  
Vol 17 (1) ◽  
pp. 4-22
Author(s):  
Saifeldin M. Siddeeg ◽  
Mohamed A. Tahoon ◽  
Norah S. Alsaiari ◽  
Muhamad Shabbir ◽  
Faouzi B. Rebah

Background: Nanomaterials offer promising remediation techniques for water containing toxic pollutants especially heavy metals. Method: A complete analysis of the application of nano-adsorbents for heavy metals removal from water has been reviewed. The effect of their functionalization on the adsorption capacity, the reusability, and the surface area has also been discussed. Result: In particular, the focus was on the applications of graphene oxide, carbon, silica, titanium dioxide, and iron oxide for water treatment. Additionally, the effect of functional groups on heavy metal selectivity has been discussed as well. Conclusion: This article will provide environmental engineers and academicians with information related to the latest engineered nanomaterials employed for the treatment of wastewater containing toxic heavy metals.


2018 ◽  
Vol 6 (42) ◽  
pp. 20861-20868 ◽  
Author(s):  
Xiyue Peng ◽  
Feng Gao ◽  
Jiaxin Zhao ◽  
Jielan Li ◽  
Jiangying Qu ◽  
...  

A 3D graphene oxide/MnFe2O4 motor is constructed via coupling shear force with capillarity at room temperature for removal of heavy metals.


Author(s):  
MdDidarul Islam, Ashiqur Rahaman, Aboni Afrose

This study was based on determining concentration of essential and toxic heavy metal in coconut water available at a local Hazaribagh area in Dhaka, Bangladesh. All essential minerals, if present in the drinking water at high concentration or very low concentration, it has negative actions. In this study, fifteen samples and eight heavy metals were analyzed by Atomic Absorption Spectroscopy (AAS) method which was followed by wet ashing digestion method. The concentration obtained in mg/l were in the range of 0.3 to 1.5, 7.77 to 21.2, 0 to 0.71, 0 to 0.9, 0 to 0.2, 0.9 to 17.3, 0.1 to 0.9, 0 to 0.9 and 0 to 0.7 for Fe, Ni, Cu, Cd, Cr, Zn, Pb and Se respectively. From this data it was concluded that any toxic heavy metals like Cd, Cr, Pb and Ni exceed their toxicity level and some essential nutrients were in low concentration in those samples. 


2017 ◽  
Vol 1 ◽  
pp. 264
Author(s):  
Md Didarul Islam ◽  
Ashiqur Rahaman ◽  
Fahmida Jannat

This study was based on to determine the concentration of macro and micro nutrients as well as toxic and nontoxic heavy metals present in the chicken feed available in Dhaka city of Bangladesh. All macro nutrients, if present in the feed at high concentration have some adverse effect, at the same time if this nutrient present in the feed at low concentration this have some adverse effect too. So that this nutrient level should be maintained at a marginal level. On the other side toxic heavy metals if present in the feed at very low concentration those can contaminate the total environment of the ecosystem. In this study six brand samples (starter, grower, finisher and layer) which was collected from different renowned chicken feed formulation industry in Bangladesh. Those samples were prepared for analysis by wet ashing and then metals were determined by Atomic Absorption Spectroscopy. It was found that 27.7 to 68.4, 57.3 to 121.9, 0.21 to 4.1, 0.32 to 2.1, 0.11 to 1.58, 0.28 to 2.11 and 0.28 to 1.78 for zinc, iron, copper, mercury, cadmium, nickel and cobalt respectively. It was found that essential macro and micro nutrients were present in the feed in low concentration on the other side mercury was present in high concentration in the feed samples.


2017 ◽  
Vol 68 (10) ◽  
pp. 2363-2366
Author(s):  
Delia Nica Badea

The paper evaluates the presence and content of traces of heavy metals Hg, Pb, Ni, Cd (total forms) from coal and solid combustion products, the degree of transfer and accessibility in the area of influence of a lignite power plant. The content of toxic heavy metals in residues are characterized by RE Meiji [ 1 (Pb and Hg) and REMeij �1 (Ni and Cd) for the filter ash. Pb and Ni content in the soil exceeds normal values, and Pb exceeds and alert value for sensitive soils around the residue deposit (70.20 mg.Kg-1). The degree of accessibility of the metals in plants (TF), reported at the Khan reference value (0.5), indicates a significant bioaccumulation level for the metals: Cd (1.9) and Hg (0.6) inside the deposit; Cd (0.39) at the base of the deposit, Hg (0.8) in the area of the thermal power plant. The trace levels of heavy metals analyzed by GFAAS and CVAAS (Hg), indicates a moderate risk potential for food safety and quality of life in the studied area.


Author(s):  
Varsha Shukla ◽  
Siddharth Kumar Das ◽  
Abbas Ali Mahdi ◽  
Shweta Agarwal ◽  
Ragini Alok ◽  
...  

BACKGROUND: Fibromyalgia syndrome (FMS) is an extra-articular rheumatological disease characterised by widespread chronic musculoskeletal pain. Metal-induced oxidative stress contributes to the severity of FMS. AIMS: First, this study evaluated the association between plasma levels of toxic heavy metals and essential metals with oxidative stress (OS) markers. Second, the OS markers and metal contents were correlated with the disease severity by assessing the Fibromyalgia Impact Questioner Revised (FIQR) and tender points (TP). METHOD: A total of 105 FMS patients and 105 healthy controls of similar age and sex were recruited. OS parameter such as lipid peroxidation (LPO), protein carbonyl group (PCG), nitric oxide (NO) and essential metals such as zinc (Zn), magnesium (Mg), manganese (Mn), copper (Cu) and toxic heavy metals such as aluminium (Al), arsenic (As), lead (Pb) were estimated. RESULTS: Levels of LPO, PCG, NO (p< 0.001) and Cu, Mn, and Al (p< 0.001), were significantly higher, and Mg (p< 0.001) and Zn (p< 0.001) were significantly lower in patients compared to controls. A positive association was observed between OS parameters, FIQR and TP with Cu, Al and Mn. A significant negative association was observed between Zn and Mg with FIQR, TP and OS parameters. CONCLUSION: Heavy metals such as Al induce OS parameters and decrease the levels of essential trace elements such as Mg and Zn, which may be responsible for the severity of FMS.


Sign in / Sign up

Export Citation Format

Share Document