A decomposition and coordination algorithm for SVSM interval of integrated transmission and distribution networks considering the uncertainty of renewable energy

2022 ◽  
Vol 136 ◽  
pp. 107761
Author(s):  
Qiong Wang ◽  
Shunjiang Lin ◽  
Yuerong Yang ◽  
Mingbo Liu
Keyword(s):  
Renewable Energy ◽  
Distribution Networks ◽  
Decomposition And Coordination ◽  
Transmission And Distribution

scholarly journals Electric Power System Operation Mechanism with Energy Routers Based on QoS Index under Blockchain Architecture

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 418 ◽  
Author(s):  
Gangjun Gong ◽  
Zhening Zhang ◽  
Xinyu Zhang ◽  
Nawaraj Kumar Mahato ◽  
Lin Liu ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power System ◽  
Electric Power ◽  
Distribution Networks ◽  
Electric Power System ◽  
Control Flow ◽  
Utilization Efficiency ◽  
Stable Operation ◽  
Bidirectional Power Flow ◽  
Transmission And Distribution

With the integration of highly permeable renewable energy to the grid at different levels (transmission, distribution and grid-connected), the volatility on both sides (source side and load side) leading to bidirectional power flow in the power grid complicates the control mechanism. In order to ensure the real-time power balance, energy exchange, higher energy utilization efficiency and stability maintenance in the electric power system, this paper proposes an integrated application of blockchain technology on energy routers at transmission and distribution networks with increased renewable energy penetration. This paper focuses on the safe and stable operation of a highly penetrated renewable energy grid-connected power system and its operation. It also demonstrates a blockchain-based negotiation model with weakly centralized scenarios for “source-network-load” collaborative scheduling operations; secondly, the QoS (quality of service) index of energy flow control and energy router node doubly-fed stability control model were designed. Further, it also introduces the MOPSO (multi-objective particle swarm optimization) algorithm for power output optimization of multienergy power generation; Thirdly, based on the blockchain underlying architecture and load prediction value constraints, this paper puts forward the optimization mechanism and control flow of autonomous energy coordination of b2u (bottom-up) between router nodes of transmission and distribution network based on blockchain.

scholarly journals Enhancing Reactive Power Compensation with STATCOM using SVPWM

2019 ◽  
Vol 8 (4S2) ◽  
pp. 408-412
Keyword(s):  
Renewable Energy ◽  
Power Quality ◽  
Reactive Power ◽  
Control Strategies ◽  
Distribution Networks ◽  
Energy Sector ◽  
Reactive Power Compensation ◽  
Power Block ◽  
Transmission And Distribution ◽  
Proper Solutions

The enormous growth in the renewable energy sector has shown tremendous improvement in the energy sector which also paves the way for huge transmission traffic in transmission and distribution networks. In addition to this transmission traffic, misbehavior also happens in energy transmission and distributions. The reactive power compensation failure results in power block out. This paper provides proper solutions for compensating reactive power with help of STATCOM and its control strategies. The power quality had been improved with help of various control strategies, PWM variations, Apply Algorithm are efficient methods.

scholarly journals Optimal Planning and Operation of a Residential Energy Community under Shared Electricity Incentives

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2045
Author(s):  
Pierpaolo Garavaso ◽  
Fabio Bignucolo ◽  
Jacopo Vivian ◽  
Giulia Alessio ◽  
Michele De Carli
Keyword(s):  
Renewable Energy ◽  
Power Distribution ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Distribution Networks ◽  
Building Envelope ◽  
Net Energy ◽  
Technical Equipment ◽  
Optimal Planning

Energy communities (ECs) are becoming increasingly common entities in power distribution networks. To promote local consumption of renewable energy sources, governments are supporting members of ECs with strong incentives on shared electricity. This policy encourages investments in the residential sector for building retrofit interventions and technical equipment renovations. In this paper, a general EC is modeled as an energy hub, which is deemed as a multi-energy system where different energy carriers are converted or stored to meet the building energy needs. Following the standardized matrix modeling approach, this paper introduces a novel methodology that aims at jointly identifying both optimal investments (planning) and optimal management strategies (operation) to supply the EC’s energy demand in the most convenient way under the current economic framework and policies. Optimal planning and operating results of five refurbishment cases for a real multi-family building are found and discussed, both in terms of overall cost and environmental impact. Simulation results verify that investing in building thermal efficiency leads to progressive electrification of end uses. It is demonstrated that the combination of improvements on building envelope thermal performances, photovoltaic (PV) generation, and heat pump results to be the most convenient refurbishment investment, allowing a 28% overall cost reduction compared to the benchmark scenario. Furthermore, incentives on shared electricity prove to stimulate higher renewable energy source (RES) penetration, reaching a significant reduction of emissions due to decreased net energy import.

scholarly journals Different Scenarios for the National Transmission Grid, Considering the Extensive Use of On-Site Renewable Energy in the Mexican Housing Sector

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 195
Author(s):  
Ivan Oropeza-Perez ◽  
Astrid H Petzold-Rodriguez
Keyword(s):  
Renewable Energy ◽  
Electricity Generation ◽  
Housing Sector ◽  
Distribution Grid ◽  
Smart Meters ◽  
Long Distance ◽  
Distribution Method ◽  
Transmission Grid ◽  
Production And Consumption ◽  
Transmission And Distribution

The Mexican national electricity transmission and distribution grid (SEN, initials in Spanish) is characterized by the high interconnection between its several electricity generation plants and the millions of final consumers throughout the country. This feature, which is seen first as an adequate transmission and distribution method for electricity between producer and consumer, has the inconvenience of being highly complex when renewable energy is introduced into the SEN. The random nature of renewable energy means that coordination between the producer and consumer is difficult; therefore, these energy sources are considered by the Mexican Federal Commission of Electricity (CFE, initials in Spanish) without priority in their generation and distribution. In this document, a solution for this is given by the consideration of on-site photovoltaic production in the Mexican residential sector, setting a straightforward relationship between production and consumption, neglecting the long-distance transmission, and freeing the transmission and distribution through the SEN at certain hours of the day. Different scenarios are studied, considering the level of penetration of this renewable energy technology into the housing sector. In this way, it is found that, if 80% of the total Mexican dwellings hold a photovoltaic roof, in some seasons of the year, a large part the total national demand can be fulfilled by the photovoltaic generation if certain systems—such as bidirectional smart meters—are applied. In this sense, the results show that, if 80% of the Mexican dwellings had a photovoltaic roof, there would be a money saving of 3418 Million USD and a mitigation of 25 million tons CO2e, for 2018. With this, it is concluded that renewable energy in Mexico could provide a much greater share if the electricity is produced in the same place where it will be consumed. This might be possible in Mexico due to the high interconnection of the transmission and distribution grid, which would manage the surplus electricity generation in the dwellings in a proper manner.

A Novel FACTS Based (DDSC) Compensator for Power-Quality Enhancement of L.V. Distribution Feeder with a Dispersed Wind Generator

2006 ◽  
Vol 7 (3) ◽  
Author(s):  
Adel M Sharaf ◽  
Khaled Mohamed Abo-Al-Ez
Keyword(s):  
Power Quality ◽  
Distributed Generation ◽  
Distribution System ◽  
Power Transmission ◽  
Traditional Approach ◽  
Distribution Networks ◽  
System Capacity ◽  
Quality Enhancement ◽  
Wind Generator ◽  
Transmission And Distribution

In a deregulated electric service environment, an effective electric transmission and distribution networks are vital to the competitive environment of reliable electric service. Power quality (PQ) is an item of steadily increasing concern in power transmission and distribution. The traditional approach to overcoming capacity and quality limitations in power transmission and distribution in many cases is the addition of new transmission and/or generating capacity. This, however, may not be practicable or desirable in the real case, for many of reasons. From technical, economical and environmental points of view, there are two important - and most of the time combined - alternatives for building new transmission or distribution networks to enhance the transmission system capacity, and power quality: the Flexible alternating current transmission devices and controllers, and the distributed generation resources near the load centers. The connection of distributed generation to the distribution grid may influence the stability of the power system, i.e. angle, frequency and voltage stability. It might also have an impact on the protection selectivity, and the frequency and voltage control in the system. This paper presents a low cost FACTS based Dynamic Distribution System Compensator (DDSC) scheme for voltage stabilization and power transfer and quality enhancement of the distribution feeders connected to a dispersed wind generator, using MATLAB/ SimPower System simulation tool.

Sign in / Sign up

Export Citation Format

Share Document