scholarly journals Analysis of heat transfer and water flow with phase change in saturated porous media by bond-based peridynamics

Author(s):  
Petr Nikolaev ◽  
Majid Sedighi ◽  
Andrey P Jivkov ◽  
Lee Margetts
2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Guansheng Chen ◽  
Nanshuo Li ◽  
Huanhuan Xiang ◽  
Fan Li

It is well known that attaching fins on the tubes surfaces can enhance the heat transfer into and out from the phase change materials (PCMs). This paper presents the results of an experimental study on the thermal characteristics of finned coil latent heat storage unit (LHSU) using paraffin as the phase change material (PCM). The paraffin LHSU is a rectangular cube consists of continuous horizontal multibended tubes attached vertical fins at the pitches of 2.5, 5.0, and 7.5 mm that creates the heat transfer surface. The shell side along with the space around the tubes and fins is filled with the material RT54 allocated to store energy of water, which flows inside the tubes as heat transfer fluid (HTF). The measurement is carried out under four different water flow rates: 1.01, 1.30, 1.50, and 1.70 L/min in the charging and discharging process, respectively. The temperature of paraffin and water, charging and discharging wattage, and heat transfer coefficient are plotted in relation to the working time and water flow rate.


Author(s):  
Yoram Rubin

Many of the principles guiding stochastic analysis of flow and transport processes in the vadose zone are those which we also employ in the saturated zone, and which we have explored in earlier chapters. However, there are important considerations and simplifications to be made, given the nature of the flow and of the governing equations, which we explore here and in chapter 12. The governing equation for water flow in variably saturated porous media at the smallest scale where Darcy’s law is applicable (i.e., no need for upscaling of parameters) is Richards’ equation (cf. Yeh, 1998)


Sign in / Sign up

Export Citation Format

Share Document