A Critical Dislocation Velocity for Serration Mechanism Transition in a Nickel-Chromium Solid Solution Alloy

Author(s):  
Qin Yu ◽  
P. Alex Greaney ◽  
T. Matthew Evans ◽  
Jamie J. Kruzic
Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  

Abstract INCONEL Alloy 601 is a nickel-chromium solid-solution alloy with excellent high-temperature properties which make it attractive for many application in aerospace and process industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-152. Producer or source: Huntington Alloy Products Division, An INCO Company.


2016 ◽  
Vol 723 ◽  
pp. 21-26
Author(s):  
Tsutomu Ito ◽  
Takashi Mizuguchi

In this study, the superplastic behavior on a fine-grained aluminum solid solution alloy consisting of thermally unstable microstructures was investigated. In order to obtain the fine-grained microstructure, friction stir processing (FSP) was applied to a commercial 5083 aluminum alloy. An equiaxial fine-grained microstructure of 7.8 mm was obtained after FSP, but this microstructure was thermally unstable at high temperatures. Commonly, for fine-grained superplasticity to occur (or to continue grain boundary sliding (GBS)), it is necessary to keep the fine-grained microstructure to less than 10 mm during the high-temperature deformation. However, in this study, a large elongation of over 200% was observed at high temperatures in spite of the occurrence of grain growth. From the microstructural observations, it was determined that the fine-grained microstructure was maintained until the early stage of deformation, but the transgranular deformation was observed at a strain of over 100%. The microstructural feature of the abovementioned transgranular deformation is similar to the deformation microstructure of the solute drag creep occurring in "Class I"-type solid solution alloys. This indicates that the deformation mechanism transition from GBS to the solute drag creep occurred during high-temperature deformation. Here, the possibility of occurrence of the superplastic elongation through deformation mechanism transition is discussed as a model of the thermally unstable aluminum solid solution alloy.


Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  

Abstract L.T.C. is a gold-nickel-chromium solid-solution alloy developed to meet the need for an improved winding wire for potentiometers of utmost reliability. It is characterized by excellent corrosion resistance combined with an unusually low temperature coefficient of electrical resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Au-2. Producer or source: Sigmund Cohn Corporation.


Author(s):  
Jordi Marti ◽  
Timothy E. Howson ◽  
David Kratz ◽  
John K. Tien

The previous paper briefly described the fine microstructure of a mechanically alloyed oxide dispersion strengthened nickel-base solid solution. This note examines the fine microstructure of another mechanically alloyed system. This alloy differs from the one described previously in that it is more generously endowed with coherent precipitate γ forming elements A1 and Ti and it contains a higher volume fraction of the finely dispersed Y2O3 oxide. An interesting question to answer in the comparative study of the creep and stress rupture of these two ODS systems is the role of the precipitate γ' in the mechanisms of creep and stress rupture in alloys already containing oxide dispersoids.The nominal chemical composition of this alloy is Ni - 20%Cr - 2.5%Ti - 1.5% A1 - 1.3%Y203 by weight. The system receives a three stage heat treatment-- the first designed to produce a coarse grain structure similar to the solid solution alloy but with a smaller grain aspect ratio of about ten.


Author(s):  
Z. Horita ◽  
D. J. Smith ◽  
M. Furukawa ◽  
M. Nemoto ◽  
R. Z. Valiev ◽  
...  

It is possible to produce metallic materials with submicrometer-grained (SMG) structures by imposing an intense plastic strain under quasi-hydrostatic pressure. Studies using conventional transmission electron microscopy (CTEM) showed that many grain boundaries in the SMG structures appeared diffuse in nature with poorly defined transition zones between individual grains. The implication of the CTEM observations is that the grain boundaries of the SMG structures are in a high energy state, having non-equilibrium character. It is anticipated that high-resolution electron microscopy (HREM) will serve to reveal a precise nature of the grain boundary structure in SMG materials. A recent study on nanocrystalline Ni and Ni3Al showed lattice distortion and dilatations in the vicinity of the grain boundaries. In this study, HREM observations are undertaken to examine the atomic structure of grain boundaries in an SMG Al-based Al-Mg alloy.An Al-3%Mg solid solution alloy was subjected to torsion straining to produce an equiaxed grain structure with an average grain size of ~0.09 μm.


Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  

Abstract CARLSON ALLOYS C600 AND C600 ESR have excellent mechanical properties from sub-zero to elevated temperatures with excellent resistance to oxidation at high temperatures. It is a solid-solution alloy that can be hardened only by cold working. High strength at temperature is combined with good workability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-470. Producer or source: G.O. Carlson Inc.


Sign in / Sign up

Export Citation Format

Share Document