Ceramic building materials from the ancient Témesa (Calabria region, Italy): Raw materials procurement, mix-design and firing processes from the Hellenistic to Roman period

2022 ◽  
Vol 41 ◽  
pp. 103253
Author(s):  
Chiara Germinario ◽  
Alberto De Bonis ◽  
Filippo Barattolo ◽  
Luigi Cicala ◽  
Luigi Franciosi ◽  
...  
2013 ◽  
Vol 47 (4) ◽  
pp. 2050
Author(s):  
V. Skliros ◽  
P. G. Lampropoulou ◽  
B. Tsikouras ◽  
K. Hatzipanagiotou ◽  
A. Christogerou ◽  
...  

A new ceramic product is introduced by mixing caustic magnesia, produced in the laboratory from pure, high quality magnesite, and natural silt. Bottom ash and red mud, two well known environmentally hazardous industrial by-products, were also added in the mixture. After testing various recipes we concluded that addition of 5% caustic magnesia in the ceramic product greatly enhances its performance. Increase bonding of the ceramic microstructure is attributed to the formation of periclase necks, the concurrent formation of small quantities of amorphous material and the homogeneously distributed pores during the experimental firing of the mixture. Combined X-ray Diffractometry and Scanning Electron Microscopy of the ceramic product revealed the occurrence of unreactive phases, inherited by the raw materials, as well as newly-formed albite and magnesioferrite. Our results show that utilization of by-products may be important and environmental friendly materials in producing low cost ceramic building materials.


2019 ◽  
Vol 23 (1) ◽  
pp. 11-14 ◽  
Author(s):  
V.Z. Abdrakhimov ◽  
A.V. Kolpakov

One of the most promising areas for the use of waste production is ─ involving them recycled as raw materials for the production of ceramic bricks. The use of waste fuel and energy complex (inter-shale clay) and chemical wastes (alumosilicate sludge) in the production of ceramic bricks promotes recycling of industrial waste, environment, expansion of raw materials base for production of ceramic building materials. Developed innovative proposals for reducing negative impacts of toxic waste processing on environmental objects, which novelty is confirmed by Patents of the Russian Federation.


2021 ◽  
Vol 906 (1) ◽  
pp. 012046
Author(s):  
Elena Shapakidze ◽  
Izolda Kamushadze ◽  
Lamara Gabunia ◽  
Ioseb Gejadze ◽  
Rajden Skhxvitaridze ◽  
...  

Abstract The main material for the modern construction business is cement/concrete, the production of which is associated with high energy and material costs and, most importantly, high CO2 emissions into the atmosphere. Based on this, the development of technologies for new energy-efficient building materials - substitutes for Portland cement is of great importance. One of the ways to solve this problem could be the wider use of ceramic building materials, the production of which requires less energy and is not associated with high CO2 emissions compared to the production of Portland cement. The subject of this article is the development of innovative technologies for the production of ceramic building materials in Georgia (ordinary building bricks and clinker bricks) by using unconventional raw material - clay shale aluvium which is a waste of natural (exogenous) processes. As the main component of the ceramic mass, we used clay shale aluvium from the Duruji river bed near the town of Kvareli, which made it possible to reduce the firing temperature and improve the quality of the finished product. X-ray phase, petrographic and electronic microscopic studies have shown that ceramic products, both building and clinker bricks, made with the use of Kvareli shale, under the same firing conditions, have been obtained with a denser structure ensuring higher physical and mechanical features as compared to clay Metekhi, which is currently used by the brick factory in Georgia. The use of shale accumulated in the region of Kvareli in various areas of the economy (including production of ceramic building materials) will make it possible to clear the adjacent territory from risky deposits of natural alluvium, which threatens to flood the city and provide companies engaged in production of ceramic building materials with low-cost and environmentally friendly raw materials.


2021 ◽  
Vol 1 (10 (109)) ◽  
pp. 14-22
Author(s):  
Larysa Spasonova ◽  
Іrіna Subota ◽  
Аnastasia Sholom

Based on the modern ideas about environmental protection, this paper reports a study into the utilization of water-treated waste from heavy metals (using copper(II) compounds as an example) for the manufacture of ceramic building materials. The examined clay minerals from local deposits and the optimal conditions for their heat treatment (at 1,100 °C) have been proposed for the sorption removal of pollutants of inorganic origin from wastewater. The use of wastewater after its treatment makes it possible to address several tasks at the same time: to protect the environment from pollution by technological wastewater, as well as to reuse wastewater in order to resolve the issue of water scarcity. Ceramic building materials were manufactured based on water purification waste (in the amount of 5 %) and clay raw materials. Their structural-mechanical and physicochemical characteristics have been comprehensively studied. Sintering processes begin at lower temperatures, which is why, with an increase in the annealing temperature to 1,000 °C and higher, their strength rapidly decreases. In the temperature range of 600‒1,100 °C, there are possibilities to apply ceramic technology to immobilize heavy metals in ceramic matrices. The prospect of utilizing water purification waste in the technological process of manufacturing inorganic ceramic materials has been shown. The safety of the building materials, manufactured by leaching pollutants from the ceramic samples using various aggressive environments (leaching to 6.4 %, 0.083 mg·cm2/day) has been investigated. The high strength and degree of the copper ion fixation in the structure of polymineral clay have been confirmed while secondary environmental pollution is almost absent


2020 ◽  
Vol 299 ◽  
pp. 210-215
Author(s):  
Victoria A. Gurieva ◽  
Anastasia A. Ilyina

The article deals with the problems of using wastes formed after extraction of copper, nickel, gold, etc. from slags. A review of existing developments in the field of using technogenic products for the production of ceramic building materials with desired properties was carried out. The results of the study of the prospects of using stale slags from non-ferrous metallurgy on the example of the slags from the Mednogorsk Copper-Sulfur Plant of the Orenburg region in combination with fusible clay from the Alimsaysky deposit for the production of ceramic brick are presented. The data of studying the technological properties of raw materials, the development of compositions are given. The effect of the material composition of the clay / slag mixture on the strength, shrinkage, water absorption and density of experimental samples – bricks after calcination in the range of 900– 1200 ° C is determined.


Heritage ◽  
2021 ◽  
Vol 4 (4) ◽  
pp. 4126-4147
Author(s):  
Jorge Ribeiro ◽  
Filipe Antunes ◽  
Ana Fragata

Architectural Terracotta (ATC) is one of the most common materials in excavations from the Roman period. These ceramic building materials are an essential component of construction. Some of these pieces show potter´s marks, of different categories, that allow access to the production world of these materials. This investigation is a first typological classification of the 1216 marks from ATC materials, collected from 41 archaeological sites in Bracara Augusta (Braga, Portugal). Most of the marks were collected from the domus of Carvalheiras, one of the most emblematic archaeological sites of the city, currently under a musealization process. With this work it was possible to correlate the studied marks with specific terracotta types (shapes), context distribution and associated chronologies. The results suggested an organized and dynamic production, and an open-market, supported by numerous officinae, certainly of different sizes. Some of them were located near the housing area and reveal the presence of a large number of workers, including women and children. Further approaches on mineralogical, chemical and technological characterization of ATC, linked with stratigraphy, are under development.


Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3564
Author(s):  
Arnas Majumder ◽  
Laura Canale ◽  
Costantino Carlo Mastino ◽  
Antonio Pacitto ◽  
Andrea Frattolillo ◽  
...  

The building sector is known to have a significant environmental impact, considering that it is the largest contributor to global greenhouse gas emissions of around 36% and is also responsible for about 40% of global energy consumption. Of this, about 50% takes place during the building operational phase, while around 10–20% is consumed in materials manufacturing, transport and building construction, maintenance, and demolition. Increasing the necessity of reducing the environmental impact of buildings has led to enhancing not only the thermal performances of building materials, but also the environmental sustainability of their production chains and waste prevention. As a consequence, novel thermo-insulating building materials or products have been developed by using both locally produced natural and waste/recycled materials that are able to provide good thermal performances while also having a lower environmental impact. In this context, the aim of this work is to provide a detailed analysis for the thermal characterization of recycled materials for building insulation. To this end, the thermal behavior of different materials representing industrial residual or wastes collected or recycled using Sardinian zero-km locally available raw materials was investigated, namely: (1) plasters with recycled materials; (2) plasters with natural fibers; and (3) building insulation materials with natural fibers. Results indicate that the investigated materials were able to improve not only the energy performances but also the environmental comfort in both new and in existing buildings. In particular, plasters and mortars with recycled materials and with natural fibers showed, respectively, values of thermal conductivity (at 20 °C) lower than 0.475 and 0.272 W/(m⋅K), while that of building materials with natural fibers was always lower than 0.162 W/(m⋅K) with lower values for compounds with recycled materials (0.107 W/(m⋅K)). Further developments are underway to analyze the mechanical properties of these materials.


2021 ◽  
Vol 13 (5) ◽  
pp. 2756
Author(s):  
Federica Vitale ◽  
Maurizio Nicolella

Because the production of aggregates for mortar and concrete is no longer sustainable, many attempts have been made to replace natural aggregates (NA) with recycled aggregates (RA) sourced from factories, recycling centers, and human activities such as construction and demolition works (C&D). This article reviews papers concerning mortars with fine RA from C&D debris, and from the by-products of the manufacturing and recycling processes of building materials. A four-step methodology based on searching, screening, clustering, and summarizing was proposed. The clustering variables were the type of aggregate, mix design parameters, tested properties, patents, and availability on the market. The number and the type of the clustering variables of each paper were analysed and compared. The results showed that the mortars were mainly characterized through their physical and mechanical properties, whereas few durability and thermal analyses were carried out. Moreover, few fine RA were sourced from the production waste of construction materials. Finally, there were no patents or products available on the market. The outcomes presented in this paper underlined the research trends that are useful to improve the knowledge on the suitability of fine RA from building-related processes in mortars.


2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Lino Bianco

AbstractRuins are a statement on the building materials used and the construction method employed. Casa Ippolito, now in ruins, is typical of 17th-century Maltese aristocratic country residences. It represents an illustration of secondary or anthropogenic geodiversity. This paper scrutinises these ruins as a primary source in reconstructing the building’s architecture. The methodology involved on-site geographical surveying, including visual inspection and non-invasive tests, a geological survey of the local lithostratigraphy, and examination of notarial deeds and secondary sources to support findings about the building’s history as read from its ruins. An unmanned aerial vehicle was used to digitally record the parlous state of the architectural structure and karsten tubes were used to quantify the surface porosity of the limestone. The results are expressed from four perspectives. The anatomy of Casa Ippolito, as revealed in its ruins, provides a cross-section of its building history and shows two distinct phases in its construction. The tissue of Casa Ippolito—the building elements and materials—speaks of the knowledge of raw materials and their properties among the builders who worked on both phases. The architectural history of Casa Ippolito reveals how it supported its inhabitants’ wellbeing in terms of shelter, water and food. Finally, the ruins in their present state bring to the fore the site’s potential for cultural tourism. This case study aims to show that such ruins are not just geocultural remains of historical built fabric. They are open wounds in the built structure; they underpin the anatomy of the building and support insights into its former dynamics. Ruins offer an essay in material culture and building physics. Architectural ruins of masonry structures are anthropogenic discourse rendered in stone which facilitate not only the reconstruction of spaces but also places for human users; they are a statement on the wellbeing of humanity throughout history.


2021 ◽  
Vol 13 (14) ◽  
pp. 7572
Author(s):  
Gigliola D’Angelo ◽  
Marina Fumo ◽  
Mercedes del Rio Merino ◽  
Ilaria Capasso ◽  
Assunta Campanile ◽  
...  

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.


Sign in / Sign up

Export Citation Format

Share Document