Understanding hydrogen embrittlement in press-hardened steel by coupling phase field and hydrogen diffusion modelling

Author(s):  
Y. Ngiam ◽  
Z.H. Cao ◽  
M.X. Huang
Author(s):  
Wilfried Wunderlich ◽  
Janos Lendvai ◽  
Hans-Joachim Gudladt

This article describes concepts of three features of microstructure–properties relationship, first the imaging and formation of nano-particles, then their contribution to hardness, and finally hydrogen embrittlement during fatigue. First, we briefly review the imaging modes in transmission electron microscopy (TEM) for nano-sized precipitates. The next issue is the hardening in Aluminum alloys, which is caused by GP-zones or precipitates, formed at the second step of the annealing process. After homogenization, the peak-hardness can be generally achieved by a few hours of annealing between 120°C and 200°C. Hardness measurements and equal-channel axial pressing (ECAP) showed that even at room temperature the driving force for formation of the particles is so strong that already within one hour of annealing after homogenization a remarkable hardening occurs. The third issue, hydrogen embrittlement, is caused by oxidation of pure Al surfaces produced at the crack tip during fatigue under ambient or wet moisture conditions. The cracks propagate preferentially along the precipitation free zone adjacent to grain boundaries, where hydrogen diffusion is fastest.


2018 ◽  
Author(s):  
John S. Medcalf ◽  
Brian G. Thomas ◽  
Salim V. Brahimi

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Xiang Qiu ◽  
Kun Zhang ◽  
Qin Kang ◽  
Yicheng Fan ◽  
Hongyu San ◽  
...  

Purpose This paper aims to study the mechanism of hydrogen embrittlement in 12Cr2Mo1R(H) steel, which will help to provide valuable information for the subsequent hydrogen embrittlement research of this kind of steel, so as to optimize the processing technology and take more appropriate measures to prevent hydrogen damage. Design/methodology/approach The hydrogen diffusion coefficient of 12Cr2Mo1R(H) steel was measured by the hydrogen permeation technique of double electrolytic cells. Moreover, the influence of hydrogen traps in the material and experimental temperature on hydrogen diffusion behavior was discussed. The first-principles calculations based on density functional theory were used to study the occupancy of H atoms in the bcc-Fe cell, the diffusion path and the interaction with vacancy defects. Findings The results revealed that the logarithm of the hydrogen diffusion coefficient of the material has a linear relationship with the reciprocal of temperature and the activation energy of hydrogen atom diffusion in 12Cr2Mo1R(H) steel is 23.47 kJ/mol. H atoms stably exist in the nearly octahedral interstices in the crystal cell with vacancies. In addition, the solution of Cr/Mo alloy atom does not change the lowest energy path of H atom, but increases the diffusion activation energy of hydrogen atom, thus hindering the diffusion of hydrogen atom. Cr/Mo and vacancy have a synergistic effect on inhibiting the diffusion of H atoms in α-Fe. Originality/value This article combines experiments with first-principles calculations to explore the diffusion behavior of hydrogen in 12Cr2Mo1R(H) steel from the macroscopic and microscopic perspectives, which will help to establish a calculation model with complex defects in the future.


Author(s):  
J. Toribio ◽  
D. Vergara ◽  
M. Lorenzo ◽  
J. J. Marti´n

The wall of a nuclear reactor pressure vessel can undergo a reduction of its mechanical properties due to the presence of hydrogen, a process known as hydrogen embrittlement (HE). A numerical model of hydrogen diffusion assisted by stress and strain was used in this paper to evaluate the HE process in the wall of a real nuclear reactor pressure vessel, formed by a bimaterial (stainless steel and low carbon steel). In this sense, a quantitative analysis was carried out of the influence of tempering heat treatments conditions applied to these two steels on hydrogen concentration accumulated in the nuclear reactor vessel during its operation time. To this end, the most relevant parameters of these heat treatments were considered: (i) tempering temperature and (ii) tempering time.


2002 ◽  
Vol 44 (3) ◽  
pp. 407-424 ◽  
Author(s):  
A.Toshimitsu Yokobori ◽  
Yasrou Chinda ◽  
Takenao Nemoto ◽  
Koji Satoh ◽  
Tetsuya Yamada

Sign in / Sign up

Export Citation Format

Share Document