Post shut-down decay heat removal from nuclear reactor core by natural convection loops in sodium pool

2016 ◽  
Vol 301 ◽  
pp. 59-73 ◽  
Author(s):  
A. Rajamani ◽  
T. Sundararajan ◽  
B.V.S.S.S. Prasad ◽  
U. Parthasarathy ◽  
K. Velusamy
2002 ◽  
Vol 29 (10) ◽  
pp. 1225-1240 ◽  
Author(s):  
Mehrdad Boroushaki ◽  
Mohammad B. Ghofrani ◽  
Caro Lucas

2021 ◽  
Vol 30 (5) ◽  
pp. 66-75
Author(s):  
S. A. Titov ◽  
N. M. Barbin ◽  
A. M. Kobelev

Introduction. The article provides a system and statistical analysis of emergency situations associated with fires at nuclear power plants (NPPs) in various countries of the world for the period from 1955 to 2019. The countries, where fires occurred at nuclear power plants, were identified (the USA, Great Britain, Switzerland, the USSR, Germany, Spain, Japan, Russia, India and France). Facilities, exposed to fires, are identified; causes of fires are indicated. The types of reactors where accidents and incidents, accompanied by large fires, have been determined.The analysis of major emergency situations at nuclear power plants accompanied by large fires. During the period from 1955 to 2019, 27 large fires were registered at nuclear power plants in 10 countries. The largest number of major fires was registered in 1984 (three fires), all of them occurred in the USSR. Most frequently, emergency situations occurred at transformers and cable channels — 40 %, nuclear reactor core — 15 %, reactor turbine — 11 %, reactor vessel — 7 %, steam pipeline systems, cooling towers — 7 %. The main causes of fires were technical malfunctions — 33 %, fires caused by the personnel — 30 %, fires due to short circuits — 18 %, due to natural disasters (natural conditions) — 15 % and unknown reasons — 4 %. A greater number of fires were registered at RBMK — 6, VVER — 5, BWR — 3, and PWR — 3 reactors.Conclusions. Having analyzed accidents, involving large fires at nuclear power plants during the period from 1955 to 2019, we come to the conclusion that the largest number of large fires was registered in the USSR. Nonetheless, to ensure safety at all stages of the life cycle of a nuclear power plant, it is necessary to apply such measures that would prevent the occurrence of severe fires and ensure the protection of personnel and the general public from the effects of a radiation accident.


2014 ◽  
Vol 986-987 ◽  
pp. 231-234
Author(s):  
Jun Teng Liu ◽  
Qi Cai ◽  
Xia Xin Cao

This paper regarded CNP1000 power plant system as the research object, which is the second-generation half Nuclear Reactor System in our country, and tried to set Westinghouse AP1000 passive residual heat removal system to the primary circuit of CNP1000. Then set up a simulation model based on RELAP5/MOD3.2 program to calculate and analyze the response and operating characteristic of passive residual heat removal system on assumption that Station Blackout occurs. The calculation has the following conclusions: natural circulation was quickly established after accident, which removes core residual heat effectively and keep the core safe. The residual heat can be quickly removed, and during this process the actual temperature was lower than saturation temperature in reactor core.


Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3509 ◽  
Author(s):  
Bruno Merk ◽  
Mark Bankhead ◽  
Dzianis Litskevich ◽  
Robert Gregg ◽  
Aiden Peakman ◽  
...  

The U.K. has initiated the nuclear renaissance by contracting for the first two new plants and announcing further new build projects. The U.K. government has recently started to support this development with the announcement of a national programme of nuclear innovation. The aim of this programme with respect to modelling and simulation is foreseen to fulfil the demand in education and the build-up of a reasonably qualified workforce, as well as the development and application of a new state-of-the-art software environment for improved economics and safety. This document supports the ambition to define a new approach to the structured development of nuclear reactor core simulation that is based on oversight instead of looking at detail problems and the development of single tools for these specific detail problems. It is based on studying the industrial demand to bridge the gap in technical innovation that can be derived from basic research in order to create a tailored industry solution to set the new standard for reactor core modelling and simulation for the U.K. However, finally, a technical requirements specification has to be developed alongside the strategic approach to give code developers a functional specification that they can use to develop the tools for the future. Key points for a culture change to the application of modern technologies are identified in the use of DevOps in a double-strata approach to academic and industrial code development. The document provides a novel, strategic approach to achieve the most promising final product for industry, and to identify the most important points for improvement.


Author(s):  
F. Pahuamba-Valdez ◽  
E. Mayoral-Villa ◽  
C. E. Alvarado-Rodríguez ◽  
J. Klapp ◽  
A. M. Gómez-Torres ◽  
...  

2019 ◽  
Vol 5 (1) ◽  
pp. 75-80
Author(s):  
Vyacheslav S. Kuzevanov ◽  
Sergey K. Podgorny

The need to shape reactor cores in terms of coolant flow distributions arises due to the requirements for temperature fields in the core elements (Safety guide No. NS-G-1.12. 2005, IAEA nuclear energy series No. NP-T-2.9. 2014, Specific safety requirements No. SSR-2/1 (Rev.1) 2014). However, any reactor core shaping inevitably leads to an increase in the core pressure drop and power consumption to ensure the primary coolant circulation. This naturally makes it necessary to select a shaping principle (condition) and install heat exchange intensifiers to meet the safety requirements at the lowest power consumption for the coolant pumping. The result of shaping a nuclear reactor core with identical cooling channels can be predicted at a quality level without detailed calculations. Therefore, it is not normally difficult to select a shaping principle in this case, and detailed calculations are required only where local heat exchange intensifiers are installed. The situation is different if a core has cooling channels of different geometries. In this case, it will be unavoidable to make a detailed calculation of the effects of shaping and heat transfer intensifiers on changes in temperature fields. The aim of this paper is to determine changes in the maximum wall temperatures in cooling channels of high-temperature gas-cooled reactors using the combined effects of shaped coolant mass flows and heat exchange intensifiers installed into the channels. Various shaping conditions have been considered. The authors present the calculated dependences and the procedure for determining the thermal coolant parameters and maximum temperatures of heat exchange surface walls in a system of parallel cooling channels. Variant calculations of the GT-MHR core (NRC project No. 716 2002, Vasyaev et al. 2001, Neylan et al. 1994) with cooling channels of different diameters were carried out. Distributions of coolant flows and temperatures in cooling channels under various shaping conditions were determined using local resistances and heat exchange intensifiers. Preferred options were identified that provide the lowest maximum wall temperature of the most heat-stressed channel at the lowest core pressure drop. The calculation procedure was verified by direct comparison of the results calculated by the proposed algorithm with the CFD simulation results (ANSYS Fluent User’s Guide 2016, ANSYS Fluent. Customization Manual 2016, ANSYS Fluent. Theory Guide 2016, Shaw1992, Anderson et al. 2009, Petrila and Trif 2005, Mohammadi and Pironneau 1994).


Sign in / Sign up

Export Citation Format

Share Document