Analysis of energy use and emissions of greenhouse gases, metals and organic substances from construction materials used for artificial turf

2017 ◽  
Vol 122 ◽  
pp. 362-372 ◽  
Author(s):  
Simon Magnusson ◽  
Josef Mácsik
Keyword(s):  
Greenhouse Gases ◽  
Energy Use ◽  
Construction Materials ◽  
Organic Substances ◽  
Artificial Turf ◽  
Materials Used

A COMPARATIVE STUDY OF TWO SWEDISH LCA-BASED TOOLS FOR PRACTICAL ENVIRONMENTAL EVALUATION OF BUILDINGS

2007 ◽  
Vol 09 (03) ◽  
pp. 319-339 ◽  
Author(s):  
KAROLINA BRICK ◽  
BJÖRN FROSTELL
Keyword(s):  
Life Cycle ◽  
Life Expectancy ◽  
Energy Use ◽  
Construction Materials ◽  
Building Construction ◽  
Environmentally Benign ◽  
Environmental Load ◽  
Environmental Evaluation ◽  
Implementation Phase ◽  
Materials Used

In Sweden, two LCA-based tools for the built environment have been developed the last years: the "Environmental Load Profile" and "EcoEffect". Both are standing in front of an implementation phase and it is therefore important that they may deliver credible and consistent results to end users and facilitate a transition to more environmentally benign building construction and administration. The present study looked at the differences in results that may appear when using the tools and where they come from. Applying the two tools for assessment of a new building on equal basis created differences in results. However, both tools pointed at energy use in the administration phase of the life cycle being the most significant factor for environmental impact, consistent with other studies. The results indicate that: (i) differences in material grouping and life expectancy for the construction materials used, (ii) differences in LCI-data used and (iii) different classification and characterisation models used, give rise to important differences.

scholarly journals Sustainable Materials Used as Lightweight Aggregate :(An Overview)

2022 ◽  
Vol 961 (1) ◽  
pp. 012027
Author(s):  
Abdulrasool Thamer Abdulrasool ◽  
Safaa S. Mohammed ◽  
Noor R. Kadhim ◽  
Wail Asim Mohammad Hussain
Keyword(s):  
Natural Resources ◽  
Building Materials ◽  
Energy Use ◽  
Construction Materials ◽  
Lightweight Aggregate ◽  
Standard Construction ◽  
Sustainable Materials ◽  
Natural Aggregates ◽  
Materials Used ◽  
Lower Bulk Density

Abstract Lightweight aggregates (LWA) are building materials with a lower bulk density than standard construction aggregates. In recent years, the contribution of industry to the circular economy has become a serious concern. Among these, the mining sector is confronted with significant problems relating to the management of a huge quantity of generated waste. The major contemporary task is to address a number of interconnected challenges, including waste management and recycling, conservation of scarce natural resources, reduction of energy use, and reduction of greenhouse gas emissions. Natural aggregates are consumed by the construction materials industry in the range of 8 to 12 billion tons per year. According to reports, the construction materials sector consumes the most energy and scarce natural resources (rocks, aggregates, and water) while also emitting greenhouse gases. In general, using waste material as lightweight aggregate decreases the concrete’s overall weight. The materials used as lightweight aggregate in concrete are discussed in this study. According to research, utilizing trash as a lightweight aggregate not only improves the characteristics of concrete but also gives a sustainable approach to minimize global waste.

AMS Dating of Potentially the Oldest Wooden Sculptures in Japan from a Shinto Shrine in Akita

Radiocarbon ◽  
2019 ◽  
Vol 61 (5) ◽  
pp. 1221-1228
Author(s):  
Naoto Fukuyo ◽  
Yusuke Yokoyama ◽  
Yosuke Miyairi ◽  
Yusuke Igarashi
Keyword(s):  
Tree Rings ◽  
Age Determination ◽  
Construction Materials ◽  
Historical Documents ◽  
Matching Method ◽  
Historical Objects ◽  
Ams Dating ◽  
Akita Prefecture ◽  
Materials Used ◽  
Matching Techniques

ABSTRACTWe analyzed rare wooden Komainu found at Akagami Shrine in Akita prefecture, Japan. The formation of historical objects is often thoroughly recorded in documents, although the formation age of this particular Komainu sculpture is still unknown due to its antiquity. Thus, age determination exercises have been conducted using radiocarbon (14C)-wiggle-matching techniques. Although only a limited quantity was available for sampling, we have successfully measured 14C samples in the sculptures along with several sets of tree rings. We interpret the Komainu sculptures age considering the age of the trees and the result obtained from the wooden construction materials used for the Akagami shrine. The results obtained from Komainu show a range from 550 CE to 1020 CE, which is consistent with the dates of the shrine’s formation. Thus, the multiple 14C-wiggle-matching method can determine precise calendar ages of wood, as well as provide some supportive information for the periods when there are no reliable historical documents.

scholarly journals Optimum Thickness of Thermal Insulation with Both Economic and Ecological Costs of Heating and Cooling

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3835
Author(s):  
Robert Dylewski ◽  
Janusz Adamczyk
Keyword(s):  
Thermal Insulation ◽  
Construction Materials ◽  
Optimum Thickness ◽  
Degree Days ◽  
Transfer Coefficients ◽  
Cooling Period ◽  
Heating And Cooling ◽  
Optimum Heat ◽  
Materials Used ◽  
Building Walls

The energy efficiency of the construction sector should be determined by the cleanliness of the environment and, thus, the health of society. The scientific aim of this article was to develop a methodology for determining the optimum thickness of thermal insulation, taking into account both economic and ecological aspects and considering both heating and cooling costs. The method takes into account the number of degree days of the heating period, as well as the number of degree days of the cooling period. Variants in terms of different types of thermal insulation, various types of construction materials for building walls, climatic zones and heat sources, were taken into consideration. In order to find the optimum thicknesses of thermal insulation, both in economic and ecological terms, a metacriterion was used. The optimum thicknesses of thermal insulation with the use of the metacriterion were obtained in the range of 0.11–0.55 m. It was observed that the values of the optimum heat transfer coefficients for economic and ecological reasons do not depend on the type of construction materials used for vertical walls. The type of applied heat source is of the greatest importance for the size of the economic and ecological benefits. The proposed mathematical model for determining the optimum thickness of thermal insulation with the use of a metacriterion is a kind of generalization of earlier models from the literature.

scholarly journals Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 276
Author(s):  
Nisar Ali Khan ◽  
Giorgio Monti ◽  
Camillo Nuti ◽  
Marco Vailati
Keyword(s):  
Numerical Model ◽  
Construction Materials ◽  
Building Codes ◽  
Construction Technique ◽  
Infill Walls ◽  
Mortar Strength ◽  
Materials Used ◽  
Seismic Response Of Buildings

Infilled reinforced concrete (IRC) frames are a very common construction typology, not only in developing countries such as Pakistan but also in southern Europe and Western countries, due to their ease of construction and less technical skills required for the construction. Their performance during past earthquakes has been in some cases satisfactory and in other cases inadequate. Significant effort has been made among researchers to improve such performance, but few have highlighted the influence of construction materials used in the infill walls. In some building codes, infills are still considered as non-structural elements, both in the design of new buildings and, sometimes, in the assessment of existing buildings. This is mainly due to some difficulties in modeling their mechanical behavior and also the large variety of typologies, which are difficult to categorize. Some building codes, for example, Eurocode, already address the influence of infill walls in design, but there is still a lack of homogeneity among different codes. For example, the Pakistan building code (PBC) does not address infills, despite being a common construction technique in the country. Past earthquake survey records show that construction materials and infill types significantly affect the seismic response of buildings, thus highlighting the importance of investigating such parameters. This is the object of this work, where a numerical model for infill walls is introduced, which aims at predicting their failure mode, as a function of some essential parameters, such as the friction coefficient between mortar and brick surface and mortar strength, usually disregarded in previous models. A comprehensive case study is presented of a three-story IRC frame located in the city of Mirpur, Pakistan, hit by an earthquake of magnitude 5.9 on 24 September 2019. The results obtained from the numerical model show good agreement with the damage patterns observed in situ, thus highlighting the importance of correctly modeling the infill walls when seismically designing or assessing Pakistani buildings that make use of this technology.

scholarly journals Implementation of BIM Modelling and Simulation Tools in Reducing Annual Energy Consumption of Multifamily Dwellings

2020 ◽  
Vol 170 ◽  
pp. 01002
Author(s):  
Subbarao Yarramsetty ◽  
MVN Siva Kumar ◽  
P Anand Raj
Keyword(s):  
Energy Efficient ◽  
Energy Use ◽  
Construction Materials ◽  
Residential Building ◽  
Energy Simulation ◽  
Point Of View ◽  
Rotational Angle ◽  
Existing Building ◽  
Simulation Tools ◽  
Efficient Option

In current research, building modelling and energy simulation tools were used to analyse and estimate the energy use of dwellings in order to reduce the annual energy use in multifamily dwellings. A three-story residential building located in Kabul city was modelled in Revit and all required parameters for running energy simulation were set. A Total of 126 experiments were conducted to estimate annual energy loads of the building. Different combinations from various components such as walls, roofs, floors, doors, and windows were created and simulated. Ultimately, the most energy efficient option in the context of Afghan dwellings was figured out. The building components consist of different locally available construction materials currently used in buildings in Afghanistan. Furthermore, the best energy efficient option was simulated by varying, building orientation in 15-degree increments and glazing area from 10% to 60% to find the most energy efficient combination. It was found that combination No. 48 was best option from energy conservation point of view and 120-degree rotational angle from north to east, of the existing building was the most energy-efficient option. Also, it was observed that 60% glazing area model consumed 24549 kWh more electricity compared to the one with 10% glazing area.

scholarly journals Environmental Performance Enters Construction Materials

MRS Bulletin ◽  
2008 ◽  
Vol 33 (4) ◽  
pp. 454-456 ◽  
Author(s):  
Peter Bonfield
Keyword(s):  
United Kingdom ◽  
Environmental Sustainability ◽  
Construction Materials ◽  
Energy Performance ◽  
The European Union ◽  
The United Kingdom ◽  
Legal Term ◽  
Chain Of Custody ◽  
Materials Used ◽  
Impact Cost

The environmental sustainability of materials used in construction applications is driving a requirement for the quanti-fcation of performance attributes of such materials. For example, the European Union (EU) Energy Performance in Buildings Directive will give commercial buildings an energy rating when rented or sold. The Code for Sustainable Homes launched by the U.K. Government's Department for Communities and Local Government (CLG) in January 2007 sets out the requirement for all new homes to be carbonneutral by 2016. In addition, homes in the United Kingdom will need to signifcantly reduce water consumption from today's average 160 liters (1) per person per day to less than 801 per person per day. Similarly stringent targets are required for waste, materials, and other factors. Such environmental and energy standards are complementing characteristics such as strength, stiffness, durability, impact, cost, and expected life with factors such as “environmental profle,” “ecopoints” (a single unit measurement of environmental impact arising from a product throughout its lifecycle that is used in the United Kingdom), “carbon footprint” (amount of CO2 produced for the lifecycle of the item), “recycled content,” and “chain of custody” (a legal term that refers to the ability to guarantee the identity and integrity of a specimen from collection through to reporting of test results).

scholarly journals Susceptibility of earth-based construction materials to fungal proliferation: laboratory and in situ assessment

2019 ◽  
Vol 3 ◽  
pp. 140-149 ◽  
Author(s):  
Alexis Simons ◽  
Alexandra Bertron ◽  
Christophe Roux ◽  
Aurélie Laborel-Préneron ◽  
Jean-Emmanuel Aubert ◽  
...  
Keyword(s):  
Air Quality ◽  
Manufacturing Process ◽  
Building Materials ◽  
Construction Materials ◽  
Microbial Density ◽  
Microbial Proliferation ◽  
Materials Used ◽  
Ecological Construction ◽  
The Impact

The impact of building materials on the environment and the health of occupants is nowadays a priority issue. Ecological construction materials such as earthen materials are currently experiencing a regain of interest due to both ecological and economic factors. The microbial proliferation on indoor materials can induce a deterioration of the building air quality and lead to an increase of health risks for the occupants. The issue of indoor air quality raises questions about the use of earthen building materials and their possible susceptibility to fungal development. The microflora of earthen materials and their ability to grow on such support are indeed poorly studied. This study focused on the quantification of both bacterial and fungal microflora along the manufacturing process. The impact of extreme humidity, simulating a hydric accident, on microflora development was analyzed on the surface and inside earthen bricks. The initial microflora of these materials was dramatically reduced during the manufacturing process, especially after heat treatment for drying. Proliferation of remaining microorganisms was only observed under high humidity condition, in particular for earthen materials with vegetal aggregates. Moreover, in situ samplings were performed on naturally dried earthen materials used in buildings. The characterization of the microbial density revealed a higher microbial density than on manufactured specimens, while microbial concentration and detected taxa seemed mainly related to the room use and building history. These results provide a better understanding of microbial proliferation on these materials.

Sign in / Sign up

Export Citation Format

Share Document