Evaluating the cost and carbon footprint of second-life electric vehicle batteries in residential and utility-level applications

2020 ◽  
Vol 113 ◽  
pp. 497-507
Author(s):  
Dipti Kamath ◽  
Siddharth Shukla ◽  
Renata Arsenault ◽  
Hyung Chul Kim ◽  
Annick Anctil
Keyword(s):  
Electric Vehicle ◽  
Carbon Footprint ◽  
Second Life ◽  
Utility Level ◽  
The Cost

scholarly journals The remaining CO2 budget: a comparison of the CO2 emissions of diesel and BEV drivetrain technology

2021 ◽  
Author(s):  
Christian Böhmeke ◽  
Thomas Koch
Keyword(s):  
Electric Vehicle ◽  
Carbon Footprint ◽  
Electricity Generation ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Battery Electric Vehicle ◽  
Useful Life ◽  
Vehicle Fleet ◽  
Real Time Simulations ◽  
Diesel Vehicle

AbstractThis paper describes the CO2 emissions of the additional electricity generation needed in Germany for battery electric vehicles. Different scenarios drawn up by the transmission system operators in past and for future years for expansion of the energy sources of electricity generation in Germany are considered. From these expansion scenarios, hourly resolved real-time simulations of the different years are created. Based on the calculations, it can be shown that even in 2035, the carbon footprint of a battery electric vehicle at a consumption of 22.5 kWh/100 km including losses and provision will be around 100 g CO2/km. Furthermore, it is shown why the often-mentioned German energy mix is not suitable for calculating the emissions of a battery electric vehicle fleet. Since the carbon footprint of a BEV improves significantly over the years due to the progressive expansion of renewable-energy sources, a comparison is drawn at the end of this work between a BEV (29.8 tons of CO2), a conventional diesel vehicle (34.4 tons of CO2), and a diesel vehicle with R33 fuel (25.8 tons of CO2) over the entire useful life.

Driving to the future of energy storage: Techno-economic analysis of a novel method to recondition second life electric vehicle batteries

2021 ◽  
Vol 295 ◽  
pp. 117007
Author(s):  
Noah Horesh ◽  
Casey Quinn ◽  
Hongjie Wang ◽  
Regan Zane ◽  
Mike Ferry ◽  
...  
Keyword(s):  
Energy Storage ◽  
Economic Analysis ◽  
Electric Vehicle ◽  
Second Life ◽  
The Future ◽  
Novel Method

The impact of global trends on the electric vehicle market in Russia: Challenges, opportunities and directions of development

2021 ◽  
Vol 17 (5) ◽  
pp. 913-939
Author(s):  
Tat'yana S. REMIZOVA ◽  
Dmitrii B. KOSHELEV
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Carbon Footprint ◽  
Renewable Energy Sources ◽  
Economic Security ◽  
Vehicle Development ◽  
Global Trends ◽  
Electric Cars ◽  
Positive Effects ◽  
The Impact

Subject. The article reviews various transport electrification scenarios, which would help reduce the CO2 emissions and environmental threats. The environmental and economic security can also be affected if the State insufficiently understands the importance of electric vehicle development, their popularization. It is also crucial to encourage the consumption, develop the infrastructure, innovative projects, which reshape the power engineering structure. Objectives. We determine how global trends influence the production and integration of electric vehicles in Russia. We also evaluate the environmental and cost effectiveness of morot vehicle electrification, opportunities and trajectories for the electric vehicle development nationwide. Methods. The study involves methods used to summarize regulatory, empirical and theoretical data, and general and partial scientific methods and techniques, such as abstraction, analysis, analogy, etc. Results. The article shows the extent of electric transport development worldwide, and focuses on environmental issues and opportunities to reduce the carbon footprint by using electric vehicles and renewable energy sources. We point out opportunities, threats, prospects and disadvantages of the electric vehicle use in Russia. The article indicates how the use of electric cars can be developed in Russia, considering changes in the production structure and the generation of positive effects as much as possible. Conclusions. Currently, Russia evidently lags behind the global production and use of electric cars, without having a priority of the carbon footprint reduction. The strategy for the car segment advancement is underdeveloped. Suggested herein, the ideas for the electric car segment development are aimed to encourage the consumption, production, advancement of infrastructure and innovative projects, and ensure the environmental security of the country.

Smart Grid-Integrated Electric Vehicle Charging Infrastructure

2022 ◽  
pp. 1-24
Author(s):  
Isa S. Qamber ◽  
Mohamed Y. Alhamad
Keyword(s):  
Electric Vehicle ◽  
Fossil Fuels ◽  
Electrical Energy ◽  
Charging Infrastructure ◽  
Electric Vehicle Charging ◽  
Proposed Model ◽  
Rotary Motors ◽  
The Cost ◽  
Efficiency And Reliability

The movements for any type of electric vehicle (EV) can be powered by wheels or driven by rotary motors. EVs derive their power from various sources, including fossil fuels. In the long term, reducing the cost of electrically powered vehicles (EDV) is seen as an essential ingredient to increase consumer acceptance. In addition, it aims to reduce the weight and volume of EDV. Moreover, the focus is on improving the performance, efficiency, and reliability of the EDV. The development of innovative modules is important when the acceleration of production and marketing needs to be improved. Consumers are looking for the production and transmission of electrical energy. This contributes to a greener environment. One of the most important parts of an EV is its battery. A proposed model presented in this chapter considers several parameters: solar radiation (PV panels), EV backup battery, and main charger. The model allows energy storage to be developed efficiently.

scholarly journals Techno-Economic Evaluation of Energy Storage Systems Built from EV Batteries – Prospective Revenues in Different Stationary Applications

2018 ◽  
Vol 64 ◽  
pp. 03003 ◽  
Author(s):  
Nguyen Tam Thanh ◽  
Naumann Maik ◽  
Truong Cong Nam ◽  
Jossen Andreas
Keyword(s):  
Economic Evaluation ◽  
Energy Storage ◽  
Electric Vehicle ◽  
Second Life ◽  
Storage Systems ◽  
Frequency Regulation ◽  
Energy Storage Systems ◽  
Combined Operation ◽  
Operating Strategies ◽  
Battery Energy

Battery energy storage systems (BESSs) are already being deployed for several stationary applications in a technically and economically feasible way. This paper focuses on the revenues of industrial BESSs built from electric vehicle lithiumion batteries with varying states of health. For this analysis, a stationary BESS simulation model is used, that is parameterised with parameters of a 22-kWh automotive battery. The comprehensive model consists of several detailed sub-models, considering battery characteristics, ageing and operating strategies, which allow technical assessment through time series simulation. Therefore, capacity fade and energy losses are considered in this techno-economic evaluation. Potential economically feasible applications of new and second-life batteries, such as photovoltaic home storage, intraday trading and frequency regulation as well as their combined operation are compared. The investigation includes different electricity price scenarios. The combined operation, followed by frequency regulation, is found to have the highest economic viability for the specified electric vehicle battery.

scholarly journals Carbon Footprint and Water Footprint of Electric Vehicles and Batteries Charging in View of Various Sources of Power Supply in the Czech Republic

Environments ◽  
2019 ◽  
Vol 6 (3) ◽  
pp. 38 ◽  
Author(s):  
Simona Jursova ◽  
Dorota Burchart-Korol ◽  
Pavlina Pustejovska
Keyword(s):  
Czech Republic ◽  
Life Cycle ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
Carbon Footprint ◽  
Electricity Generation ◽  
Water Footprint ◽  
Hard Coal ◽  
The Czech Republic ◽  
Main Determinant

In the light of recent developments regarding electric vehicle market share, we assess the carbon footprint and water footprint of electric vehicles and provide a comparative analysis of energy use from the grid to charge electric vehicle batteries in the Czech Republic. The analysis builds on the electricity generation forecast for the Czech Republic for 2015–2050. The impact of different sources of electricity supply on carbon and water footprints were analyzed based on electricity generation by source for the period. Within the Life Cycle Assessment (LCA), the carbon footprint was calculated using the Intergovernmental Panel on Climate Change (IPCC) method, while the water footprint was determined by the Water Scarcity method. The computational LCA model was provided by the SimaPro v. 8.5 package with the Ecoinvent v. 3 database. The functional unit of study was running an electric vehicle over 100 km. The system boundary covered an electric vehicle life cycle from cradle to grave. For the analysis, we chose a vehicle powered by a lithium-ion battery with assumed consumption 19.9 kWh/100 km. The results show that electricity generated to charge electric vehicle batteries is the main determinant of carbon and water footprints related to electric vehicles in the Czech Republic. Another important factor is passenger car production. Nuclear power is the main determinant of the water footprint for the current and future electric vehicle charging, while, currently, lignite and hard coal are the main determinants of carbon footprint.

scholarly journals Efficient wireless charging system for supercapacitor-based electric vehicle using inductive coupling power transfer technique

2019 ◽  
Vol 11 (11) ◽  
pp. 168781401988696
Author(s):  
Ahsan Elahi ◽  
Arslan Ahmed Amin ◽  
Umar Tabraiz Shami ◽  
Muhammad Tayyab Usman ◽  
Muhammad Sajid Iqbal
Keyword(s):  
Electric Vehicle ◽  
Inductive Coupling ◽  
Wireless Charging ◽  
Power Transfer ◽  
Charging System ◽  
Energy Demands ◽  
Experimental Implementation ◽  
Power Transfer Efficiency ◽  
The Cost ◽  
Mathematical Relationships

Wireless charging has become an emerging challenge to reduce the cost of a conventional plug-in charging system in electric vehicles especially for supercapacitors that are utilized for quick charging and low-energy demands. In this article, the design of an efficient wireless power transfer system has been presented using resonant inductive coupling technique for supercapacitor-based electric vehicle. Mathematical analysis, simulation, and experimental implementation of the proposed charging system have been carried out. Simulations of various parts of the systems are carried out in two different software, ANSYS MAXWELL and MATLAB. ANSYS MAXWELL has been used to calculate the various parameters for the transmitter and receiver coils such as self-inductance ( L), mutual inductance ( M), coupling coefficient ( K), and magnetic flux magnitude ( B). MATLAB has been utilized to calculate output power and efficiency of the proposed system using the mathematical relationships of these parameters. The experimental setup is made with supercapacitor banks, electric vehicle, wattmeters, controller, and frequency generator to verify the simulation results. The results show that the proposed technique has better power transfer efficiency of more than 75% and higher power transfer density using a smaller coil size with a bigger gap of 4–24 cm.

Sign in / Sign up

Export Citation Format

Share Document