scholarly journals Accumulation of microorganisms on work clothes of workers collecting different types of waste – A feasibility study

2022 ◽  
Vol 139 ◽  
pp. 250-257
Author(s):  
Anne Mette Madsen ◽  
Pil Uthaug Rasmussen ◽  
Margit W. Frederiksen
Author(s):  
Rudi Van Nieuwenhove

Different types of instruments have been developed both for in-pile fuel and materials studies at the Halden Reactor Project. In recent years, several of the standard instruments have been upgraded to be able to tolerate much higher temperatures. In particular, several instruments are now able to operate up to 650°C and 25 MPa, thus in the range suitable for supercritical water (SCW) studies. In addition, a feasibility study for an in-pile SCW loop has been carried out that shows that such a loop can be realized in the Halden reactor, allowing for all the instrumentation possibilities that are presently carried out in pressurized water reactor (PWR) and boiling water reactor (BWR) conditions. Another, and cheaper, alternative is to perform corrosion experiments inside a small capsule in which SCW is maintained by means of gamma heating and external pressure lines. The conceptual designs of the SCW loop and SCW capsule will be highlighted.


2018 ◽  
Vol 192 ◽  
pp. 03055
Author(s):  
Kiattisak Roonprasang ◽  
Eakasit Sritham

A computer simulation based on MATLAB was developed to investigate the effectiveness of using evaporator condensate to subcool refrigerants in a vapor-compression refrigeration system. Three different types of refrigerant including R22, R410a, and R134a were studied. The simulation clearly showed the effectiveness of the technique to subcool refrigerant using evaporator condensate. Throughout the RH range of surrounding in this study, 40%-100%RH, the vapor-compression model system using R22 as a refrigerant provided the highest COP linearly ranging from 3.40 to 3.76. The greatest improvement in COP was found in the model system with R410a where the COP values increased by 3.33% to 15.36.


2018 ◽  
Author(s):  
Mala Babagana Gutti

This study is aimed at educating the engineering public and professionals on the importance and necessity of waste management, reuse and recycling and also awareness on the benefits of conserving our environment through the reuse and utilization of waste within it. The study has been able to identify the different types of waste with potential of utilization towards construction and several key research factors and criteria which can provide focus and direction towards the choice of waste-type to be used and ensuring that they have utilization potentials in the construction industries.


2018 ◽  
Author(s):  
Mala Babagana Gutti

This study is aimed at educating the engineering public and professionals on the importance and necessity of waste management, reuse and recycling and also awareness on the benefits of conserving our environment through the reuse and utilization of waste within it. The study has been able to identify the different types of waste with potential of utilization towards construction and several key research factors and criteria which can provide focus and direction towards the choice of waste-type to be used and ensuring that they have utilization potentials in the construction industries.


2019 ◽  
Vol 6 (4) ◽  
pp. 240-249
Author(s):  
Yoshi Nishitani ◽  
◽  
Chie Hosokawa ◽  
Yuko Mizuno-Matsumoto ◽  
Tomomitsu Miyoshi ◽  
...  

1986 ◽  
Vol 23 (04) ◽  
pp. 851-858 ◽  
Author(s):  
P. J. Brockwell

The Laplace transform of the extinction time is determined for a general birth and death process with arbitrary catastrophe rate and catastrophe size distribution. It is assumed only that the birth rates satisfyλ0= 0,λj> 0 for eachj> 0, and. Necessary and sufficient conditions for certain extinction of the population are derived. The results are applied to the linear birth and death process (λj=jλ, µj=jμ) with catastrophes of several different types.


2020 ◽  
Vol 43 ◽  
Author(s):  
Rajen A. Anderson ◽  
Benjamin C. Ruisch ◽  
David A. Pizarro

Abstract We argue that Tomasello's account overlooks important psychological distinctions between how humans judge different types of moral obligations, such as prescriptive obligations (i.e., what one should do) and proscriptive obligations (i.e., what one should not do). Specifically, evaluating these different types of obligations rests on different psychological inputs and has distinct downstream consequences for judgments of moral character.


Author(s):  
P.L. Moore

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.


Sign in / Sign up

Export Citation Format

Share Document