Air-Processable and Thermally Stable Hole Transport Layer for Non-Fullerene Organic Solar Cells

Author(s):  
Jules Bertrandie ◽  
Anirudh Sharma ◽  
Nicola Gasparini ◽  
Diego Rosas Villalva ◽  
Sri Harish K. Paleti ◽  
...  
2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Nguyen Nang Dinh ◽  
Do Ngoc Chung ◽  
Tran Thi Thao ◽  
David Hui

Polymeric nanocomposite films from PEDOT and MEH-PPV embedded with surface modified TiO2nanoparticles for the hole transport layer and emission layer were prepared, respectively, for organic emitting diodes (OLEDs). The composite of MEH-PPV+nc-TiO2was used for organic solar cells (OSCs). The characterization of these nanocomposites and devices showed that electrical (I-Vcharacteristics) and spectroscopic (photoluminescent) properties of conjugate polymers were enhanced by the incorporation of nc-TiO2in the polymers. The organic light emitting diodes made from the nanocomposite films would exhibit a larger photonic efficiency and a longer lasting life. For the organic solar cells made from MEH-PPV+nc-TiO2composite, a fill factor reached a value of about 0.34. Under illumination by light with a power density of 50 mW/cm2, the photoelectrical conversion efficiency was about 0.15% corresponding to an open circuit voltageVoc= 0.126 V and a shortcut circuit current densityJsc= 1.18 mA/cm2.


2D Materials ◽  
2021 ◽  
Author(s):  
Jianxiao Wang ◽  
Le Liu ◽  
Min Zhao ◽  
Chenyu Han ◽  
Xichang Bao ◽  
...  

2012 ◽  
Vol 9 (5) ◽  
pp. 399-406
Author(s):  
Do Chung ◽  
Nguyen Dinh ◽  
Tran Thao ◽  
Nguyen Nam ◽  
Tran Trung ◽  
...  

Polymeric nanocomposite films from PEDOT and MEH-PPV embedded with surface modified TiO2 nanoparticles were prepared, respectively for the hole transport layer (HTL) and emission layer (EL) in Organic Light Emitting Diodes (OLED). The composite of MEH-PPV + nc-TiO2 was used for Organic Solar Cells (OCS). The results from the characterization of the properties of the nanocomposites and devices showed that electrical (I-V characteristics) and spectroscopic (photoluminescent) properties of the conjugate polymers were enhanced due to the incorporation of nc-TiO2 in the polymers. The OLEDs made from the nanocomposite films would exhibit a larger photonic efficiency and a longer lasting life. For the OSC made from MEH-PPV + nc-TiO2 composite, the fill factor (FF) reached a value as high as 0.34. Under illumination of light with a power density of 50 mW/cm2, the photoelectrical conversion efficiency (PEC) was found to be of 0.15% corresponding to an open circuit voltage VOC = 1.15 V and a short-cut circuit current density JSC = 0.125 mA/cm2.


2020 ◽  
Vol 5 (9) ◽  
pp. 2935-2944 ◽  
Author(s):  
Yuanbao Lin ◽  
Yuliar Firdaus ◽  
Furkan H. Isikgor ◽  
Mohamad Insan Nugraha ◽  
Emre Yengel ◽  
...  

2020 ◽  
Vol 12 (46) ◽  
pp. 52028-52037
Author(s):  
Haitao Xu ◽  
Helong Zou ◽  
Dan Zhou ◽  
Guang Zeng ◽  
Lie Chen ◽  
...  

2018 ◽  
Vol 28 (14) ◽  
pp. 1707319 ◽  
Author(s):  
Nilushi Wijeyasinghe ◽  
Leonidas Tsetseris ◽  
Anna Regoutz ◽  
Wai-Yu Sit ◽  
Zhuping Fei ◽  
...  

Solar Energy ◽  
2018 ◽  
Vol 165 ◽  
pp. 131-135 ◽  
Author(s):  
Ranoo Bhargav ◽  
Asit Patra ◽  
S.K. Dhawan ◽  
S.P. Gairola

2019 ◽  
Vol 3 (6) ◽  
pp. 1418-1426 ◽  
Author(s):  
Marta Ruscello ◽  
Tanmoy Sarkar ◽  
Artem Levitsky ◽  
Giovanni Maria Matrone ◽  
Nikolaos Droseros ◽  
...  

Low temperature NiOx is achieved using PEO as sacrificial ink additive to make hole transport layer for solar cells.


RSC Advances ◽  
2016 ◽  
Vol 6 (55) ◽  
pp. 50043-50052 ◽  
Author(s):  
Saqib Rafique ◽  
Shahino Mah Abdullah ◽  
Waleed E. Mahmoud ◽  
Attieh A. Al-Ghamdi ◽  
Khaulah Sulaiman

The synthesis of vanadium pentaoxide (V2O5) nanoparticles by a hydrothermal method and their utilization in a PEDOT:PSS buffer layer in a PCDTBT:PC71BM device structure is demonstrated.


Sign in / Sign up

Export Citation Format

Share Document